Brand

Rating

Price

Special Offers

Length

Type

Overall Length

Type of Cut

For general work on iron and steel. Slightly tapered in width and thickness. Double cut on both sides, and single cut on both edges.  Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).

For general work on iron and steel.Slightly tapered in width and thickness.Double cut on both sides, and single cut on both edges.

Cross Section allows use on Convex and Concave surfaces.Tapered very slightly towards point both in width and thickness.

Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edges permits work in corners.

Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edge permits work in corners.

For filing slots, keyways and surface filing. Slightly tapered towards point. Double cut teeth.  Bastard Cut: approx. 26 teeth per 25mm (Coarse).

Single cut teeth for sharpening round-hooded chain saw teeth.  Safe point and efficient tooth design.

For general work on iron and steel slightly tapered in width and thickness.  Double cut on both sides, and single cut on both edges.

Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edge permits work in corners.  Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).

Cross section allows use on convex and concave surfaces. Tapered very slightly towards point both in width and thickness.  Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).

For filing circular openings or concave surfaces. Slightly tapered towards point.  Smooth Cut: approx. 62 teeth per 25mm (Fine).Second Cut: approx. 36 teeth per 25mm (Medium).Bastard Cut: approx. 26 teeth per 25mm (Coarse).

For filing circular openings or concave surfaces, slightly tapered towards point.

For filing slots, keyways and surface filing. Slightly tapered towards point.Double cut teeth.

For filing all types of handsaws with 60° angle teeth.Straight set edges for filing gullets between saw teeth.

A single ended triangular saw file, single cut. For general saw sharpening and for sharpening dovetail and other fine toothed saws.

For filing circular openings or concave surfaces, slightly tapered towards point. Size 250mm (10in) Cut round smooth Single Cut Tanged.

Round Smooth Cut File 250mm (10in) NICRSM10

For general work on iron and steel. Slightly tapered in width and thickness. Double cut on both sides, and single cut on both edges. Smooth Cut approx. 62 teeth per 25mm (Fine). Second Cut approx. 36 teeth per 25mm (Medium). Bastard Cut approx. 26 teeth per 25mm (Coarse). Size 300mm (12in) Cut flat bastard Tanged.

Flat Bastard Cut File 300mm (12in) NICFB12

For general work on iron and steel. Slightly tapered in width and thickness. Double cut on both sides, and single cut on both edges. Size 250mm (10in) Cut flat smooth Tanged

Flat Smooth Cut File 250mm (10in) NICFSM10

Size 250mm (10in)  
Cut half round smooth   
Flat Side: Double Cut  
Half-Round: Single Cut  
Tanged

Half-round Smooth Cut File 250MM (10IN)

Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edges permits work in corners. Size 200mm (8in) Cut hand second Tanged

Hand Second Cut File 200mm (8in) NICHSC8

Parallel in width but slightly tapered in thickness. Double cut on both sides but on one edge only. Safe edge permits work in corners. Size 200mm (8in) Cut hand smooth Tanged

Hand Smooth Cut File 200mm (8in) NICHSM8

For filing slots, keyways and surface filing. Slightly tapered towards point. Double cut teeth. Bastard Cut approx. 26 teeth per 25mm (Coarse). Size 200mm (8in) Cut square bastard Tanged.

Square Bastard Cut File 200mm (8in) NICSB8

Used by cabinet makers and woodworkers. Single cut on edges. Half-Round with the curved side having a larger radius than wood rasp.  Length 250mm (10in).  Half-Round Regular Cut Tanged.

Half-Round Second Cut Cabinet Rasp 250mm (10in)

A 6 piece set packed in a wallet containing one of each 14cm needle files: Equalling, half-round, flat, round, square and three-square.  Cut: Fine.Size: 5in.Set of 6.

Red Wallet Needle Mini File Set 6 Piece 42030

A rectangular shaped, tanged horse rasp, single cut on both edges with fine rasp teeth on one face and the special Magicut file teeth on the other.Cuts much faster than conventional horse rasps.Length is approximately 350mm (14in).  
Tanged.

Horse Rasp Magicut 350mm (14in)

Plain Horse Rasps are double ended with rasp teeth on one side and file teeth on the other.The edges are single cut.Overall length: 350mm (14in).

Horse Rasp Plain Regular Half File 350MM (14IN)

A single ended triangular saw file, single cut. For dovetail sharpening and other fine toothed saws Size 150mm (6in) Side 9/32in Tanged

Extra Slim Taper Saw File 150mm (6in) NICTES6

Single cut teeth for sharpening round-hooded chain saw teeth. Safe point and efficient tooth design. Pkt 3 Length 200mm (8in) Diameter 7/32in

Chainsaw Files Round 200mm x 7/32in (Pack 3) NICC732PK3

For general work on iron and steel slightly tapered in width and thickness. Double cut on both sides, and single cut on both edges. Size 150mm (6in) Cut flat second Tanged

Flat Second Cut File 150mm (6in) NICFSC6

Size 150mm (6in)  
Cut hand bastard  
Tanged
Note: Image is for illustrative purposes only and may differ from the actual product

Hand Bastard Cut File 150MM (6IN)

Cross section allows use on convex and concave surfaces. Tapered very slightly towards point both in width and thickness. Smooth Cut approx. 62 teeth per 25mm (Fine). Second Cut approx. 36 teeth per 25mm (Medium). Bastard Cut approx. 26 teeth per 25mm (Coarse). Size. 150mm (6in) Cut half round bastard Flat Side Double Cut Half-Round Double Cut. Tanged

Half-Round Bastard Cut File 150mm (6in) NICHRB6

Cross Section allows use on Convex and Concave surfaces. Tapered very slightly towards point both in width and thickness. Size 200mm (8in) Cut half round second Flatside Double Cut Half-Round Double Cut Tanged

Half-Round Second Cut File 200mm (8in) NICHRSC8

Size 100mm (4in)  
Cut round bastard   
Single Cut  
Tanged.
Note: Image is for illustrative purposes only and may differ from the actual product

Round Bastard Cut File 100MM (4IN)

For filing circular openings or concave surfaces, slightly tapered towards point. Size 150mm (6in) Cut round second Single Cut Tanged.

Round Second Cut File 150mm (6in) NICRSC6

For filing slots, keyways and surface filing.  Slightly tapered towards point.Double cut teeth. Size   100mm (4in) Cut square smooth  Tanged.

Square Smooth Cut File 100mm (4in)

For filing all types of handsaws with 60 angle teeth. Straight set edges for filing gullets between saw teeth. Single cut. Tanged Size 100mm (4in) Side 11/32in.

Taper Saw File 100mm (4in) NICTR4

A single ended triangular saw file, single cut. For general saw sharpening and for sharpening dovetail and other fine toothed saws. Size 100mm (4in) Side 3/16in Tanged

Slim Taper Saw File 100mm (4in) NICTS4

A rectangular shaped rasp, single cut on the edges with rasp teeth on one side and file teeth on the other. Ideal for hot rasping. Length excluding the tang is approximately 350mm (14in).

Horse Rasp Tanged Half File 350mm (14in) NICTHR14

Crescent Nicholson Warding Smooth Cut File for locksmithing work in wards or notches of keys and for reaching into narrow places. Double cut on sides, single cut on edges. 1 x Crescent Nicholson Warding Smooth Cut File 150mm (6in)

Our Official Crescent Nicholson Product Range

We suggest upgrading to Chrome