Brand

Rating

Price

Special Offers

Product Type

Colour

Keep your static sensitive components and devices safe whilst in storage or transit, through the use of our ESD Static Shielding Bags.
These bags provide a conductive barrier against ESD around your components (known as the faraday cage effect) This provides the ideal environment for your printed circuit boards and other static sensitive devices, when they are being handled outside of an EPA (electrostatic protected area) 
Four Layers Of Protection - Static Dissipative Coating, Polyester, Aluminum Shield, Static dissipative Polyethylene
 
Key Benefits Of Purchasing Static Shielding Bags Through Kaisertech
•	Each of the bags are 75 microns thick, offering reliable packing for your static sensitive products and components.
•	14" x 18" in size (355x457mm) .
•	Semi-transparent bags helping you to easily identify the item you enclose within the bag.
•	Open top bags available in the dimensions you require.
•	All bags are RoHS and REACH compliant.
•	Kaisertech is an approved supplier by many major manufacturers across the globe.
•	Each bag is supplied with an ESD symbol as standard, along with the ability to temporarily close each bag with an esd warning label.
 
Protect Your Components When Being Stored Or Transported With The Use Of Static Sheilding Bags!
 
Meet The Following ESD Standards/Requirements:
 
	ESD STM11		ANSI/ESD S20.20
	31-2006		MIL-STD-3010
	EIA541		IEC 61340-5-1
	MIL-PRF-81705		ASTM D 882


General Specifications
Electrical Properties	Typical Values
Surface Resistivity/Resistance	STM11.31-2006/MIL-STD-3010 4046
Interior	>106<1011 ohms/squares >106 >1011 ohms/square
Exterior 	 >106 <1011 ohms/squares >106 <1011 ohms/square
Static Shielding	<30 volts STM11.31-2006/EIA541/MIL81705
Static Shielding	<50 nJ STM11.31-2006
Static Decay 	<2 seconds IEC61340-5-1-1998
Charge Retention	<100 volts IEC61340-5-1-1998
Size Tolerances 	±3mm +/15%
Physical Properties	 
Tensile Strength	>20 Ibs ASTM D 882
Seam Strength	Pass MIL-PRF-81705
Light Transmission	35-40% Tobias
Heat Sealing Conditions	 
Temperature	180c – 250c
Time 	0.5-3.5 seconds
Pressure	30-70 PSI
75um ± 10%	
Outgassing	Pass ASTM E595
Non-Corrosive	Pass FTMS 101 MTH 3005

Pink Anti-Static Bags
 
Pink Anti-Static Bags provide safe transportation of non-static sensitive devices in Electro Static protected areas
Electrostatic damage to electronic devices can occur at any point. 
Damage results from handling devices in uncontrolled surroundings or when poor ESD control practices are used.
 
•	60microns thick
•	Supplied with ESD symbol as standard
•	Available in open top or resealable loc-top.
•	Supplied in packs of 100pcs.
•	RoHS and REACH compliant.
•	Semi-transparent for easy identification
•	Approved by major manufacturers worldwide.
 
-Two layer construction
Anti Static Coating, Polyethylene
Layer of Antistatic Coating, no Shielding ability. 
Material will not charge if in contact with other material.
 
 -Standards
Meets the requirements of:
- ESD STM11.31-2006	- MIL81705
- EIA541	- MIL-STD-3010 4046
- RoHS and REACH	- IEC 61340-5-1-1998


General Specifications
Standards - Meets the requirements of ESD STM11.31-2006, EIA541, MIL81705, MIL-STD3010
4046, IEC61340-5-1-1998
 
Specifications:
Electrical Properties:  Typical Values
Surface Resistivity/Resistance STM11.31-2006/ANSI/ESD STM11.11
Interior  >106 <1011 ohms/square >106 <1011 ohms/square
Exterior  >106 <1011 ohms/square >106 <1011 ohms/square
Static Decay  < 2 seconds IEC61340-5-1-1998
Charge Retention  <100 volts IEC61340-5-1-1998
 
Physical Properties:
Seam Strength  Pass MIL-PRF-81705
 
Heat Sealing Conditions:
Temperature  110c – 150c
Time   0.5 – 3.5 seconds
Pressure  20῀60PSI
Thickness  0.06±mm
Outgassing  Pass ASTM E595
Non-Corrosive  Pass FTMS 101 MTH 3005
Shelf Life:  3 years
 ANTI STATIC COATING

Damage to devices can result from handling them in uncontrolled surroundings or when poor ESD control practices are used.
Pink Anti-Static Bags offer safe transportation of non-static sensitive devices in Electro Static protected areas.
 
Key Features
•	Made from, flexible, soft-textured polyethylene and anti-static coating
•	60microns thick and supplied in packs of 100
•	Supplied with ESD symbol as standard
•	Available in open top or resealable loc-top.
•	RoHS and REACH compliant.
•	Semi-transparent for easy identification
•	Approved by major manufacturers worldwide.
 
Two layer construction
•	Anti Static Coating, Polyethylene
•	Layer of Antistatic Coating, no Shielding ability. 
Material will not charge if in contact with other material.
Meet The Following ESD Standards/Requirements:

ESD STM11.31-2006, EIA541, MIL81705, MIL-STD, MIL-STD-3010 4046, IEC61340-5-1


General Specifications
Electrical Properties	Typical Values
Surface Resistivity/Resistance	STM11.31-2006/ANSI/ESD STM11.11
Interior	>10^6 <1-^11 ohms/square >10^6 <10^11 ohms/square
Exterior 	>10^6 <1-^11 ohms/square >10^6 <10^11 ohms/square
Static Decay 	<2 seconds IEC61340-5-2-3:2016
Charge Retention	<100 volts IEC61340-5-2-3:2016
 	 
Heat Sealing Conditions	 
Temperature	100°C - 150°C
Time	0.5-3.5 seconds
Pressure	20-60 PSI
Thickness	0.06mm +/- 10%
Outgassing	Pass ASTM E595
Non-corrosive	Pass FTMS 101 MTH 3005
Shelf-life	≥3 years
 	 
Physical Properties	 
Seam strength	Pass MIL-PRF-81705

Pink Open Top Bags 8" X 12" (203x305mm)

Keep your static sensitive components and devices safe whilst in storage or transit, through the use of our ESD Static Shielding Bags.
These bags provide a conductive barrier against ESD around your components (known as the faraday cage effect) This provides the ideal environment for your printed circuit boards and other static sensitive devices, when they are being handled outside of an EPA (electrostatic protected area) 
Four Layers Of Protection - Static Dissipative Coating, Polyester, Aluminum Shield, Static dissipative Polyethylene
 
Key Benefits Of Purchasing Static Shielding Bags Through Kaisertech
•	Each of the bags are 75 microns thick, offering reliable packing for your static sensitive products and components.
•	14" x 18" in size (355x457mm) .
•	Semi-transparent bags helping you to easily identify the item you enclose within the bag.
•	Open top bags available in the dimensions you require.
•	All bags are RoHS and REACH compliant.
•	Kaisertech is an approved supplier by many major manufacturers across the globe.
•	Each bag is supplied with an ESD symbol as standard, along with the ability to temporarily close each bag with an esd warning label.
 
Protect Your Components When Being Stored Or Transported With The Use Of Static Sheilding Bags!
 
Meet The Following ESD Standards/Requirements:
 
	ESD STM11		ANSI/ESD S20.20
	31-2006		MIL-STD-3010
	EIA541		IEC 61340-5-1
	MIL-PRF-81705		ASTM D 882


General Specifications
Electrical Properties	Typical Values
Surface Resistivity/Resistance	STM11.31-2006/MIL-STD-3010 4046
Interior	>106<1011 ohms/squares >106 >1011 ohms/square
Exterior 	 >106 <1011 ohms/squares >106 <1011 ohms/square
Static Shielding	<30 volts STM11.31-2006/EIA541/MIL81705
Static Shielding	<50 nJ STM11.31-2006
Static Decay 	<2 seconds IEC61340-5-1-1998
Charge Retention	<100 volts IEC61340-5-1-1998
Size Tolerances 	±3mm +/15%
Physical Properties	 
Tensile Strength	>20 Ibs ASTM D 882
Seam Strength	Pass MIL-PRF-81705
Light Transmission	35-40% Tobias
Heat Sealing Conditions	 
Temperature	180c – 250c
Time 	0.5-3.5 seconds
Pressure	30-70 PSI
75um ± 10%	
Outgassing	Pass ASTM E595
Non-Corrosive	Pass FTMS 101 MTH 3005

ESD Loc-Top Metal Bags 4" X 6" (102x152mm)

Pink Anti-Static Bags
 
Pink Anti-Static Bags provide safe transportation of non-static sensitive devices in Electro Static protected areas
Electrostatic damage to electronic devices can occur at any point. 
Damage results from handling devices in uncontrolled surroundings or when poor ESD control practices are used.
 
•	60microns thick
•	Supplied with ESD symbol as standard
•	Available in open top or resealable loc-top.
•	Supplied in packs of 100pcs.
•	RoHS and REACH compliant.
•	Semi-transparent for easy identification
•	Approved by major manufacturers worldwide.
 
-Two layer construction
Anti Static Coating, Polyethylene
Layer of Antistatic Coating, no Shielding ability. 
Material will not charge if in contact with other material.
 
 -Standards
Meets the requirements of:
- ESD STM11.31-2006	- MIL81705
- EIA541	- MIL-STD-3010 4046
- RoHS and REACH	- IEC 61340-5-1-1998


General Specifications
Standards - Meets the requirements of ESD STM11.31-2006, EIA541, MIL81705, MIL-STD3010
4046, IEC61340-5-1-1998
 
Specifications:
Electrical Properties:  Typical Values
Surface Resistivity/Resistance STM11.31-2006/ANSI/ESD STM11.11
Interior  >106 <1011 ohms/square >106 <1011 ohms/square
Exterior  >106 <1011 ohms/square >106 <1011 ohms/square
Static Decay  < 2 seconds IEC61340-5-1-1998
Charge Retention  <100 volts IEC61340-5-1-1998
 
Physical Properties:
Seam Strength  Pass MIL-PRF-81705
 
Heat Sealing Conditions:
Temperature  110c – 150c
Time   0.5 – 3.5 seconds
Pressure  20῀60PSI
Thickness  0.06±mm
Outgassing  Pass ASTM E595
Non-Corrosive  Pass FTMS 101 MTH 3005
Shelf Life:  3 years
 ANTI STATIC COATING

LOC Top Pink Bags 12" X 16" (305x406mm)

Keep your static sensitive components and devices safe whilst in storage or transit, through the use of our ESD Static Shielding Bags.
These bags provide a conductive barrier against ESD around your components (known as the faraday cage effect) This provides the ideal environment for your printed circuit boards and other static sensitive devices, when they are being handled outside of an EPA (electrostatic protected area) 
Four Layers Of Protection - Static Dissipative Coating, Polyester, Aluminum Shield, Static dissipative Polyethylene
 
Key Benefits Of Purchasing Static Shielding Bags Through Kaisertech
•	Each of the bags are 75 microns thick, offering reliable packing for your static sensitive products and components.
•	3" x 5" in size (75x125mm) .
•	Semi-transparent bags helping you to easily identify the item you enclose within the bag.
•	Zipper closed bags available in the dimensions you require.
•	All bags are RoHS and REACH compliant.
•	Kaisertech is an approved supplier by many major manufacturers across the globe.
•	Each bag is supplied with an ESD symbol as standard, along with the ability to temporarily close each bag with an esd warning label.
 
Protect Your Components When Being Stored Or Transported With The Use Of Static Sheilding Bags!
 
Meet The Following ESD Standards/Requirements:
 
	ESD STM11		ANSI/ESD S20.20
	31-2006		MIL-STD-3010
	EIA541		IEC 61340-5-1
	MIL-PRF-81705		ASTM D 882


General Specifications
Electrical Properties	Typical Values
Surface Resistivity/Resistance	STM11.31-2006/MIL-STD-3010 4046
Interior	>106<1011 ohms/squares >106 >1011 ohms/square
Exterior 	 >106 <1011 ohms/squares >106 <1011 ohms/square
Static Shielding	<30 volts STM11.31-2006/EIA541/MIL81705
Static Shielding	<50 nJ STM11.31-2006
Static Decay 	<2 seconds IEC61340-5-1-1998
Charge Retention	<100 volts IEC61340-5-1-1998
Size Tolerances 	±3mm +/15%
Physical Properties	 
Tensile Strength	>20 Ibs ASTM D 882
Seam Strength	Pass MIL-PRF-81705
Light Transmission	35-40% Tobias
Heat Sealing Conditions	 
Temperature	180c – 250c
Time 	0.5-3.5 seconds
Pressure	30-70 PSI
75um ± 10%	
Outgassing	Pass ASTM E595
Non-Corrosive	Pass FTMS 101 MTH 3005

Our Official Kaisertech ESD Product Range

We suggest upgrading to Chrome