Brand

Rating

Price

Special Offers

The SR 510, P3 R* particle filter is designed for use in Sundström half masks, full face masks and the SR 500/SR 500 EX/SR 700 fan. The filter provides protection against all types of particulate pollutants. The particle filter can easily be combined with gas filters from the Sundström filter range in order to provide protection also against gases and vapours, e.g. during spray painting. The particle filter should be combined with pre-filter SR 221, which will thereby extend the life of the particle filter. The SR 500/SR 500 EX fan should always be used with two particle filters or two combined filters consisting of gas filters and particle filters. *R (Re-useable) : The filter is intended to be used for more than a single shift.

SR510 P3 Filter

The SR 100 half mask is an Air Purifying Respirator (APR) made of silicone in three sizes, i.e. S/M, M/L and L/XL. The mask is equipped with two exhalation valves, which ensures very low exhalation resistance. The valve covers with partitions effectively protect the exhalation membrane against dust and paint mist. The material and pigment of the mask body are approved by FDA and BGA for foods, which minimizes the risk of contact allergies. The easily adjustable elastic head harness straps of the mask are designed as a V-shaped loop and have a large dished crown plate, which contributes towards a comfortable and safe fit. The mask is used either as an APR in combination with filters and/or cartridges from the Sundström range, or in combination with the SR 307 compressed air attachment, this combination is called a Type C Continuous Flow Supplied Air Respirator (SAR). A pre-filter holder for simple checking of the performance are supplied. Best stored in box SR 230 or storage case SR 339.

SR100 Half Mask M/L

Prefilter SR 221 is a disc that is meant to catch coarse particles and by that extend the lifetime of the particle filters SR 510 P3 R and SR 710 P3 R, combined filter SR 299-2 ABEK1-Hg-P3 R and SR 599 A1BE2K1-Hg-P3 R. The prefilter is placed in the prefilter holder and then snapped on to the particle filter or combined filter.

SR221 Pre Filter (Pack of 5)

Gas filter SR 297, Class 1, is designed for use together with Sundström half masks and full face masks. The filter is of type ABEK and provides protection against the following types of gases and vapours: Type A protects against organic gases and vapours, such as solvents, with boiling points > +65 °C. Type B protects against inorganic gases and vapours, such as chlorine, hydrogen sulphide and hydrogen cyanide. Type E protects against acidic gases and vapours, such as sulphur dioxide and hydrogen fluoride. Type K protects against ammonia and certain amines, such as ethylene diamine. The gas filter can easily be combined with particle filter SR 510 P3 R in order to obtain protection also against aerosols (particles) , e.g. during spray painting.

SR297 ABEK1 Filter

The SR 299-2 is a combined filter consisting of a Class 1 gas filter and Class 3 particle filter. The filter is designed for use in Sundström full face masks and half masks. The filter is of type ABEK1-Hg-P3 R and provides protection against the following types of gases, vapours and particles: Type A protects against organic gases and vapours, such as solvents, with boiling points > +65 °C. Type B protects against inorganic gases and vapours, such as chlorine, hydrogen sulphide and hydrogen cyanide. Type E protects against acidic gases and vapours, such as sulphur dioxide and hydrogen fluoride. Type K protects against ammonia and certain amines, such as ethylene diamine. Type Hg protects against mercury vapour. Warning. Maximum use time 50 hours. Type P3 R* protects against all types of particulate pollutants, e.g. dust, mist and smoke. *R (Re-useable) : The filter is intended to be used for more than a single shift.

SR299 ABEKHgP3 Filter

Gas filter SR 315 Class 1 are designed for use with Sundström half masks and full face masks. The filter are of type ABE and provide protection against the following types of gases and vapours: Type A protects against organic gases and vapours, such as solvents, with boiling points > +65 °C. Type B protects against inorganic gases and vapours, such as chlorine, hydrogen sulphide and hydrogen cyanide. Type E protects against acidic gases and vapours, such as sulphur dioxide and hydrogen fluoride. The gas filter can easily be combined with particle filter SR 510 P3 R in order to obtain protection also against aerosols (particles) , e.g. during spray painting.

SR315 ABE1 Filter

The SR 230 accommodates a half mask with combination filter. The box is triangular and has a cover that is secured to the box. Equipped with both shoulder strap and holder for securing to the userÃƒÂ¢Ã¢â€šÂ¬Ã¢â€žÂ¢s belt.

SR230 Storage Case

The hood together with the battery-powered SR 500, SR 500 EX or SR 700 fan and approved filters are included in the Sundström fan-assisted respiratory protection device systems. The breathing hose of the hood is connected to the fan, equipped with a filter. The pressure generated in the hood prevents particles and other pollutants from entering the hood. The hoods can also be used with the SR 507 compressed air equipment. This combination forms a breathing apparatus designed for continuous air flow, for connection to a compressed air supply. The equipment can be used as an alternative to filter respirators in all situations for which filter respirators are recommended. This applies particularly to work that is hard, warm or of long duration.

SR520 Headtop (M/L) (H06-0212)

Its adjustable head harness helps you find the ideal fit while the large polycarbonate visor provides face protection and a wide field of vision. Connect the breathing hose to the power unit and select from the Sundström range of filters to provide breathable air to the wearer.

About-
• Respirator face shield for use with the Sundström SR 500 EX powered respirator (available separately) 
• Can also be used with the SR 507 compressed-air supply regulator but only in non-explosive environments
• Polycarbonate visor is resistant to impact and scratches, and provides a wide field of vision
• ATEX-approved for use in potentially explosive environments
• Visor can be flipped up when not in use
• Replacement visors are available separately
• Air supply keeps the visor demisted
• Adjustable head harness for a great fit
• Replaceable, flexible breathing hose
• Equipped with exhalation valve
• It is essential that a risk assessment is carried out by a competent person before work is started in a potentially explosive environment

Specifications-
EN 12941:1998 + A2:2008
EN 14594:2005
EN 166
ATEX 2014/34/EU
II 2 D Ex ib IIIC T195° Db, II G Ex ib IIA T3 Gb
Assigned protection factor (APF) : 40 (3A, 3B) , 40 (TH3)

SR540 Ex - Respirator Face Shield - H06-6012 (TH3)

Lithium-ion battery for fan unit SR 500. STD = Standard 2, 25 Ah.

R06-0108 Spare Battery for SR500

The SR 518 A2 gas filter are intended for use in the SR 500/SR 500 EX fan. Protects against organic gases and vapours, such as solvents, with boiling points > +65 °C. The SR 500/SR 500 EX fan unit must always be used with two particle filters or two combined filters consisting of gas filters and particle filters.

SR518 A2 Powered Air Filter

SR 505 Storage bag for fan unit SR 500/SR 700/SR 500 EX with face piece.

SR505 Storage Bag for Fan Unit

The protective hoods are designed for use together with Sundström half masks and full face masks with filters or SR 307 compressed air attachment, and with the SR 90 Airline. The hood is made of chemicals-resistant materials and provides protection against splashing and dripping of most solvents and acids in relatively low concentrations. However, the material may be affected by extended contact with certain solvents in liquid form. The hood is extra roomy, so that both a safety helmet and ear protectors can be worn under the hood, if necessary. The SR 346 hood is extended so that it covers the top part of the user’s body. The visor is treated to prevent misting. The hood can be machine-washed about 10 times – without spin-drying – at a maximum of +40 °C.

SR346 Chemical Hood

Discover…
Specially developed for excellent performance, the Sundström SR 500 EX powered respirator is ATEX-approved for use in potentially explosive environments and superbly easy to use. The unit supplies filtered air to the user’s headtop and is ideally suited to intensive situations in place of a filter respirator. This lightweight power unit is comfortable to wear around you while the simple controls make it easy to get started. Simply add the appropriate face shield and relevant filters for your application.

Learn more…
• Powered respirator unit to supply filtered air to the user
• For use with a range of Sundström filters and headtops relevant to your application (available separately) 
• Intrinsically safe and ATEX-approved for use in potentially explosive environments
• Easy-to-use controls allow user to start and stop quickly
• Lightweight design that is comfortable to wear
• Standard airflow of 175-240L/min
• Automatic airflow control
• Warning alarm in the event of low airflow
• Pack also includes battery and charger
• Charging time: two hours
• It is essential that a risk assessment is carried out by a competent person before work is started in a potentially explosive environment


Get technical…
EN 12941:1998 + A2:2008
EN 12942:1998 + A2:2008
EN 13463-1:2009
EN 60079-0:2012
EN 60079-11:2012
ATEX 2014/34/EU
II 2 D Ex ib IIB IIIC T195° Db, II G Ex ib IIA T3 Gb, II G Ex ib IIB T3 Gb

SR500 Ex - Powered Respirator - H06-2012

The SR 597 A1BE2K1 gas filter is intended for use in the SR 500/SR 500 EX fan. The filter type protect against the following gases/vapours: Type A protects against organic gases and vapours, such as solvents, with boiling points > +65 °C. Type B protects against inorganic gases and vapours, such as chlorine, hydrogen sulphide and hydrogen cyanide. Type E protects against acidic gases and vapours, such as sulphur dioxide and hydrogen fluoride. Type K protects against ammonia and certain amines, such as ethylene diamine. The SR 500/SR 500 EX fan unit must always be used with two particle filters or two combined filters consisting of gas filters and particle filters.

About-
• Gas filter offering respiratory protection against organic vapours with boiling points above 65°C, inorganic vapours, acid gases and ammonia
• For use with the Sundström SR 500 and SR 500 EX powered respirator units
• Parts should be checked regularly for signs of wear and damage, and replaced when necessary

Specifications-
EN 12941:1998
EN 12942:1998
A1BE2K1

SR597 A1BE2K1 Gas Filter (Pair) - H02-7212

The SR 500 is a battery-powered fan that, together with a filter and an approved head top, is included in the Sundström fan-assisted respiratory protective device systems. The SR 500 can be used as an alternative to filter respirators in all situations in which these are recommended. This applies particularly to work that is hard, warm or of long duration. The human interface may consist of a hood, face shield, half mask or full face mask. The fan is equipped with a filter, and the filtered air is fed through a hose to the human interface. The pressure then generated prevents surrounding pollutants from penetrating into the mask. The characteristics of the SR 500 are as follows: The battery is of lithium-ion type

Two battery alternatives, i.e. STD (Standard 2.2 Ah) and HD (Heavy Duty 3.6 Ah) 
The charging time for the Standard battery is around 1.5 hours and for the Heavy Duty battery, about 2 hours
• Equipped with two filters/combined filters • Operating time of up to 13 hours
• The same control is used for starting, stopping and selection of operating status
• Display with symbols
Equipped with automatic air flow control with compensation for air pressure and temperature
Can be used together with hoods SR 520, SR 530, SR 561, SR 562, SR 601, SR 602 face shield SR 570, half mask SR 900, full face mask SR 200, welding shield SR 592, helmet with visor SR 580 or welding shield/helmet with visor SR 584/SR 580. Electronics ingress protection is approved in IP class IP67 according to IEC/EN 60529.
The SR 500 is also available in an explosion-protected version designated the SR 500 EX for use in a potentially explosive atmosphere. See the separate product leaflet.

SR500 Blower Unit

The SR 580 together with the battery-powered SR 500, SR 500 EX or SR 700 fan and approved filters are included in the Sundström fan-assisted respiratory protection device systems. The breathing hose of the helmet with visor is to be connected to the fan, equipped with filters. The pressure generated in the visor prevents particles and other pollutants from entering the breathing zone. The SR 580 can also be used with the SR 507 compressed air equipment. This combination forms a breathing apparatus designed for continuous air flow, for connection to a compressed air supply. See separate product leaflet SR 507. The equipment can be used as an alternative to filter respirators in all situations for which filter respirators are recommended. This applies particularly to work that is hard, warm or of long duration.

SR580 Protective Helmet (H06-8012)

Gas filter SR 298 is designed for use with Sundström half masks and full face masks. The filter is of type AX and provides protection against organic gases and vapours, such as solvents, with boiling points ≤ +65 °C. The gas filter can easily be combined with particle filter SR 510 P3 R in order to obtain protection also against aerosols (particles) , e.g. during spray painting. For single use only.

SR298 Ax Filter

Membrane kit for half mask SR 100 secure that you keep your Half-Mask Respirator functioning effectively and lasting longer. The kit contains 1 pcs inhalation membrane, 2 pcs exhalation membranes, and 2 pcs protective caps. Meets and exceeds NIOSH standards for air purifying respirators.

FEATURES:
Exhalation valves reseal instantly with each breath securing an extremly high protection factor
Protective caps made of high quality nylon plastic material
Membranes made of heat treated silicone
Protective caps are specifically designed to protect the membranes and the sealing area of the valve seat
Membranes in orange color for easy inspection prior to use
This membrane kit provides valve replacement for SR-100, SR200, and SR 90-3 (Next generation of SR90 Respirator) 
KIT INCLUDES:
Kit for half mask SR 100 and SR200
1 pc inhalation membranes.
2 pcs exhalation membranes.
2 pcs protective caps.
PRODUCT SPECIFICATIONS:
Depth: 0.5
Height: 2
Width: 2
NIOSH Classification: P1

R01-2004 - Replacement Membrane Kit for SR100/SR200/SR90-3

This Sundström replacement membrane kit keeps your SR 200 full-face respirator mask in safe, functional condition. With a set of vital spares, including valve membranes and cover caps, you’ll never be caught out in the middle of a job.
• Service kit for a Sundström SR 200 full-face respirator mask
• Two exhalation valve membranes which reseal instantly with each breath for a high protection factor
• Three inhalation (non-return) valve membranes
• Two protective nylon plastic valve cover caps designed to protect the membranes and seals
• Two inner mask valves
• Membranes are made from heat-treated silicone and are coloured orange for easy inspection prior to use
• Parts should be checked regularly for signs of wear and damage, and replaced when necessary
• Sundström part number: R01-1204

Our Official Sundstrom Product Range

We suggest upgrading to Chrome