Brand

Rating

Price

Special Offers

Type

Thickness

Inside Diameter

Outside Diameter

Stud Size

Diameter

Clip Width

Size

Dimensions I.D.

TICO S/PA anti vibration material is a high performance machinery mounting pad. It matches today's fast changing manufacturing environment, where ease of machine mounting and flexibility of plant layout are prime factors.

Key Features:

• Reduces noise and vibration
• Maximum recommended load bearing capacity of 0.5 MN/m2 (approx. 50 tonnes per square metre)
• Resistant to a wide range of fluid media
• Operating temperature range of -40˚C to 100˚C.
• Can be adhered to floor - No bolting required.
• Easy to cut and simple to install.

Suitable for the majority of applications where ease of installation and flexibility of plant layout are prime factors on installations. This pad is compatible with all types of machine base. 

S/PA is a tough and resilient bonded cellular material. It is made from a blend of selected cork particles and polychloroprene /acrylonitrile elastomers. It is resistant to water, most oils, spirits and cutting fluids. The anti vibration pad material has a high co-efficient of friction and does not need a textured surface for efficient operation. 

The material is usually fixed to the floor and the machine with TICO Contact Adhesive S, but machines with a high centre of gravity (for example) may be bolted using nuts and studs. In this instance TICO Washers and Collars must be employed to stop transfer of vibration through bolts.

TICO S/CL clamp strip isolates vibration between pipe-work and hanger, this clamp strip is manufactured from our well known Tico S rubber bonded cork material and is red/brown in colour.

• Manufactured from TICO S  material, proven in industrial applications worldwide.
• Raised shoulder design for positive location.
• Sizes to suit most common strap widths.
• Quick, easy installation.
• Reduction and absorption of shock, noise and vibration.
• Pliable and easy to cut.
• Prevents electrolytic action between dissimilar metals.
• Quality assurance to BS EN ISO 9001.

TICO S/CO Bolt Isolation Collars are used to prevent transmission of machine noise and vibration through the bolt to the surrounding area.
Key Features:

• Isolate bolts from a machine base.
• Minimum wall thickness of 3mm.

A bolt provides a direct transmission path for vibration from the machine to the floor, effectively short-circuiting the TICO pad. To prevent this, it is essential that the bolts are isolated from the machine base. This is achieved using TICO Bolt Isolation Collars.

Although the vast majority of machinery plant can be secured by TICO Pads and Adhesive, cases where bolts might be employed are where the centre of gravity falls outside the machine base as with an inclinable power press, radial drill, or where the centre of gravity is high.

In these applications, TICO Bolt Isolation S/CO Collars should also be used to prevent transmission of machine noise and vibration through the bolt to the surrounding area. It is recommended that the nuts not be over tightened so as to firmly locate the machine without applying further compression to the TICO Pads.

TICO S/SH Shimming is commonly used in conjunction with other TICO pads (e.g. TICO S/PA), to provide a quick and efficient way of leveling plant without compromising the vibration isolating properties of the main pads.

Key Features:

• Accurate and rapid height adjustment and leveling
• Low profile for minimum additional height.
• Simple installation and easily cut to size.

TICO S/SH is normally used for relatively small variations in level, because of its thickness. This leveling sheet is formed from rubber bonded cork. TICO S/SH can also be used to provide a conformable interface between two members with a minimal impact on height.

TICO Adjustamounts - are specially designed for mounting machines and structures where accurate levelling is of prime importance, and where slight additional height is required. 

They have been found especially suitable for certain tool room machinery such as long 
bed lathes, precision grinders as well as for conveyors and light structures mounted on varying floor levels. 
 
They provide a rapid and efficient  method of machinery mounting, without recourse to other methods which can damage floors. 

1. Accurate and rapid height adjustment and levelling. 
2. TICO resilient insert virtually eliminates  floor damage. 
3. Low profile for minimum additional height 
4. Will also fit many existing levelling studs on plant 
5. Wide range to suit many applications and loads

Typical Applications:

• Plant or machinery needing a high degree of levelling for precision operation.

• Transfer systems and conveyors where accurate gradient is required.

• Free-standing equipment needing a quick and economical mounting.

• Test beds and instruments, marking out tables, inspection benches, etc. where a reliable 
horizontal reference is essential.

• Any instance when time constraints prohibit installation by other means.

TICO S/WA Bolt Isolation Washer is used to prevent transmission of vibration and machine noise through the bolt to the surrounding area.
Key Features:

• Isolate bolts from a machine base.
• 6mm thick with an outside diameter of three times the nominal bolt diameter.

A bolt provides a direct transmission path for vibration from the machine to the floor, effectively short-circuiting the TICO pad. To prevent this, it is essential that the bolts are isolated from the machine base. This is achieved using TICO Collars.

Although the vast majority of machinery plant can be secured by TICO Pads and Adhesive, cases where bolts might be employed are where the centre of gravity falls outside the machine base as with an inclinable power press, radial drill, or where the centre of gravity is high.

In these applications, TICO S/WA Washers should also be used to prevent transmission of machine noise and vibration through the bolt to the surrounding area. It is recommended that the nuts not be over tightened so as to firmly locate the machine without applying further compression to the TICO Pads.

TICO S/WA Washers- 6mm thick with an outside diameter of three times the bolt diameter.

TP010061 6.0mm Anti Vibration Pad S/PA 100mm x 1.2M

TK-070325 Clip Strip S/CL JW55-125 32mm x 1.2M

TL001211 M20 Bolt Isolation Collar S/CO

TE-00586X S/SH 0.75mm Shimming 900mm x 1.2M

TF040111 65mm Adjust Amount - JW61-2-2

AA-001053 - Contact Adhesive - 5L

TR005359 S Isolating Washer M26 x 78mm O/DX6mm

Tico Pipe-Grip Grip Type JW152-27 3/4" HSG

Pipe-Grip Grip Type JW152-27 3/4" HSG

Tico Pipe-Grip Guide Type JW172-61 2" HSG

Pipe-Grip Guide Type JW172-61 2" HSG

Scheduled_Orders

show_with_global

SearchPage-Enable-Sort-Attribute-Value

AttributeValueSortOnSearchAndCategory

ProductPage-Add-To-Quotation

show

ProductPage-AddToBasket-Mobile

hide

New_Login_Registration_Toggle

InfoPage-DiscountCodes

experiment_1

Previously-Purchased-Tag

Show

Recommendations

test

Number-Of-Recommendations

seven

Header-MainMenu

SearchPage-FilterPanel-Expanded

ProductPage_Bundle

two_products

ProductPage-Attribute-Selector

VariantThreeDropDown

FamilyPage-Attribute-Selector

VariantZeroDropDown

Discount-PromoLabel

CheckoutPage-BeforeYouGo

SearchPage-LeadTimeFilter

SearchPage-SearchResultLimit

Hundred

Personalised-BoostType

default

ProductPage-ViewAll-Terminal-Node

ProductPage-Title-Length-Mobile

StickyFilterPanel-InfiniteScroll

Hide

SingleLine-ProductHeader-Mobile

SHOW

SearchPage-BoostType

boost_img_lt_atb_gp

ProductPage-Title-Mobile

Below

Vertical-Recommendations_Toggle

ProductPage-Pills-Visibility

Expanded

Sticky-MainMenu

Payment-GooglePay

SearchPage-InfiniteScroll-Limit

Thousand

SearchPage_Top_Category

search-templates

defaultTemplate

Our Official Tico Product Range

We suggest upgrading to Chrome