Brand

Rating

Price

Special Offers

Water Quality Testing - Free UK Delivery Over £25 - Buy Online | Zoro

Pure Tungsten Electrodes • Composition: 99.9% Tungsten. • Application: AC Welding on Carbon Steel, Stainless Steel, Nickel & Titanium. • Specialty: A low cost solution for AC welding. • Note: Not suitable for DC welding & shorter life with AC welding.

• Composition: 98.5% Tungsten, 1.5% Lanthanum • Application: DC Welding on Carbon Steel, Stainless Steel, Nickel and Titanium • Specialty: Excellent arc striking. Can replace 2% Thoriated without changing welding parameters • Note: Can be used for AC welding with a pointed tip on square wave and has a high current capacity

Lanthanated Tungsten Electrodes • Composition: 99% Tungsten, 1% Lanthanum • Application: DC Welding on Carbon Steel, Stainless Steel, Nickel and Titanium • Specialty: Maintains a point well and can be used with AC

2% Ceriated Tungsten Electrodes • Composition: 98% Tungsten, 2% Cerium. • Application: DC Welding • Specialty: DC welding at low current settings but can be used fully in AC processes, Orbital tube & pipe fabricating applications, thin sheet metal work & intricate welding • Note: Not recommended for High Amperage welding.

Heavy coated, rutile type high-efficiency electrode having a weld metal recovery of approx. 180 %. It is suited to produce long fillet welds and economically filling-up large weld sections especially in shipbuilding. Suitable to use in pre-painted plates. Relatively low current intensities and short burn-off times. Easy arc striking and restriking.

Thick basic-covered electrode for depositing tough and wear resisting overlays on structural members subjected to severe wear. It is particularly resistant to high meta-to-metal wear, moderate impact and abrasion. The weld metal has sufficient red hardness up to +600°C. It can be machined only by grinding. Suitable hardfacing applications where wear resistance at higher temperatures is a prime concern, as in hot cut offs, dies for pressure castings, rolls, crushers excavator parts, bucket edges and bucket teeth, drilling bits, coal planes, conveyor screws. Multi-layers deposits will be free of cracks, even without depositing intermediate buffer layers. Only in case of very crack sensitive base metals, a tough buffer layer, made with ESB 40 or EI 307B electrodes, is required. Preferred to use with DC, electrode in positive (+) pole and also possible to use with AC.

Medium coated, cellulosic electrode, especially designed for welding of pipes and plates in all positions at low welding currents. Due to its high penetration, particularly suitable for root pass and fill passes in vertical down direction. Used in pipe-line construction, shipbuilding, storage vessels and assembly works. DCEN (-) is ideal in root passes and DCEP (+) is recommended for fill and cap passes in vertical down position.

Especially suitable for welding in sheets thinner then 5 mm, galvanized sheets and tubes, primer painted, painted and slightly rusty steels and in production of tanks and boilers, tube installations. Very easily operated in positional welding, including vertically-down. Good gap-bridging. Smooth arc, well suited for tack-welding due to its easy arc striking and re-striking properties. Possible to use equally well both with AC and DC. Welds are smooth, slightly concave and blending into base metal without undercutting. Slag is self-releasing.

High efficiency (160 %) electrode for joining dissimilar steels and depositing claddings on ferritic steels. The weld metal consists of austenitic Cr-Ni-Mn steel with possible small amounts of delta ferrite. The weld metal is highly crack resistant and therefore suited for joining difficult to weld steels and depositing stress relaxing buffer layers on crack sensitive base metal prior to hardfacing deposits. Weld metal work hardens by impact and pressure. Suitable for armour plates, rail, cross-overs, crane wheels, idlers, which are subjected to dynamically loading, pressure, impact and abrasion. It is non-scaling up to +850°C and highest operating temperature for dissimilar steel joints is +300°C. In the case of higher temperatures, use ENI 422 electrodes. High current carrying capacity due to its low alloy steel core wire and used with DCEP (DC+)

These 2% Thoriated Tungsten electrodes are ideal for protecting the arc and weld pool from inert gases when ARC welding. The electrode is 1.6mm diameter and 150mm in length.

Features and Benefits
• Manufactured to Parweld®'s professional standards
• Ideal for protecting both the arc and weld pool from inert gases

Typical Applications
• ARC Welding with inert gases

Tungsten Electrode 2% Thoriated 1.6

Pure Tungsten Green Tipped 2.4mm x 150mm

Cable Kit Electrode Holder 400A 4MT

KEY FEATURES •  General Purpose electrode good ignition weld properties notably in downhand.
StANDARDS • AWS A5:1.7

3.2mm x 350mm E6013 Electrodes

Suitable for fabrication and repair welding of dynamically loaded steel constructions, machines and agricultural equipments, workshop and maintenence welding. Smooth and clean welds, blending into base metal without undercuts. Excellent gap bridging properties. The double covering of this electrode produces a stable, concentrated and directed arc, thus being ideally suited for root pass and positional welding and is suited for AC welding. Welds are of X-ray quality.

ARC Welding Electrode ESB 44 E7016 VAC 2.50 x 350mm 2.5KG

Rutile coated electrode for welding austenitic stainless Cr-Ni steels or cast steels, having an extra low carbon content, as well as stainless or heat resisting chromium steels or cast steels. Suitable for welding stainless steel tanks, valves, pipes and linings in chemical, food, beverage, pharmaceutical industries. For operating temperatures of up to +350°C, non-scaling up to +800°C. Possible to use equally well both with AC and DC. Easy arc striking and re-striking. Fine metal droplet transfer, good fusion of joint faces, finely rippled bead surface, easily removable slag.

ARC Welding Electrode EI 308L VAC 2.50 x 300mm 1.75KG

300A Optimum Type Electrode Holder

1.5% Lanthanum Gold Tipped 3.2mm x 150mm

1% Lanthanum Black Tipped 2.4mm x 175mm

2% Ceriated Grey Tipped 2.0mm x 150mm

600A ECONOMY ELECTRODE HOLDER CROCODILE TYPE

Note: Image is for illustrative purposes only and may differ from the actual product

600A Economy Electrode Holder Crocodile Type

600A Electrode Holder Screw Type

ARC Welding Electrode ESH 180R E7024 3.25 x 450mm 6.5KG

ARC Welding Electrode EH 360B 5.00 x 450mm 6.5KG

ARC Welding Electrode ESC 60 E6010 Tin 2.50 x 350mm 8kg

Electrode having a nickel core wire, for welding on grey cast iron with and without preheating. Suitable for welding joints as well as for surfacing of worn cast iron parts. Suitable to use in repair of machine frames, machine housings, machine parts and bearing blocks. The electrode has a very soft, regular fusion, and a quiet and steady arc. It is well suited for positional welding. Very little dilution with the parent metal takes place, resulting in good machinability of the transition area. Weld short beads, about 30 to 50 mm long. In order to reduce weld residual stresses, hammer-peen welds slightly before cooling. Preferably is used with DCEN but possible to use with also AC.

ARC Welding Electrode ENI 412 ENi-CI VAC 3.25 x 300mm 1.75KG

ARC Welding Electrode ESR 12 E6012 4.00 x 350mm 5kg

ARC Welding Electrode EIS 307 VAC 3.25 x 350mm 2kg

C1521 Electrode Hafnium Insert

PR101 Electrode

Discount-PromoLabel

hide

FamilyPage-Attribute-Selector

VariantThreeDropDown

Header-MainMenu

show

InfoPage-DiscountCodes

experiment_2

MyaccountPage_Recommendations

New_Login_Registration_Toggle

Number-Of-Recommendations

eight

Payment-GooglePay

Personalised-BoostType

default

Previously-Purchased-Tag

Show

ProductPage_Bundle

three_products

ProductPage-Add-To-Quotation

ProductPage-AddToBasket-Mobile

ProductPage-Attribute-Selector

ProductPage-Pills-Visibility

Expanded

ProductPage-Title-Length-Mobile

ProductPage-Title-Mobile

Below

ProductPage-ViewAll-Terminal-Node

Recommendations

control

Scheduled_Orders

show_with_global

search-templates

defaultTemplate

SearchPage_Top_Category

Default

SearchPage-BoostType

boost_img_lt_atb

SearchPage-Enable-Sort-Attribute-Value

AttributeValueSortOnSearchAndCategory

SearchPage-FilterPanel-Expanded

SearchPage-InfiniteScroll-Limit

Thousand

SearchPage-LeadTimeFilter

SearchPage-SearchResultLimit

Hundred

SingleLine-ProductHeader-Mobile

SHOW

Sticky-MainMenu

StickyFilterPanel-InfiniteScroll

Hide

Browse our original Parweld products in Water Quality Testing

We suggest upgrading to Chrome