Drum tool, for containers with 2'' thread, made of GRP reinforced PP. Supplied = assembled. Thread = 2 inch. Material = polypropylene. Seal material = NBR rubber. Colour = blue. Product type = drum tools. For quick, easy and safe filling of aggressive media from containers placed horizontally. The tool is used to open the drum lid and close it again after the filling process. Prevents losses due to drips and leaks. Made of highly resistant, fibreglass reinforced polypropylene. Open drum lids of containers placed horizontally - fill/empty - close. The container does not have to be placed upright for this purpose. No contact with the media/liquids. Quick, easy and clean emptying even when highly viscous liquids are involved. Easy to operate: Attach the drum tool to the lid of the drum using the locking ring, push the handle towards the drum and turn it to unscrew the lid, and pull the handle away from the drum to carry out the filling process. Proceed in the reverse order to close the drum again and remove the drum tool from the lid of the drum. Turning the horizontal container by 180° (with the drum tool attached) makes it easy to fill containers as well. After each filling process, the drum lid is screwed back on tightly - for optimal protection against leakage. This prevents uncontrolled leakage of liquids. Made of robust fibreglass reinforced polypropylene that is highly resistant to chemicals. Seals made of nitrile rubber (NBR) Resistant to aggressive chemicals, acids and alkaline solutions etc.