Brand

Rating

Price

Special Offers

Plumbing Accessories - Free UK Delivery Over £25 - Buy Online | Zoro

Vale Two Bolt Saddle Clamp

The Vale® Two Bolt Saddle Clamp is part of the Industrial Ancillaries professional range of Vale® fittings.

Vale School Board Clamp Galvanised

Galvanised Vale® school board clamp with Industrial Ancillaries. This galvanised school board clamp is available in a variety of sizes ranging from 1/4 to 4.

Vale Brass Schoolboard Clamps

Vale® brass schoolboard clamps with Industrial Ancillaries. These brass Vale schoolboard clamps are available in a range of OD sizes from 15mm to 54mm.

Vale Stainless Steel Saddle Clip

Vale® stainless steel saddle clips from Industrial Ancillaries. These stainless steel saddle clips are available as 1 or 2 way with OD sizes 6mm to 12mm.

Vale Unlined Pipe Clamp Steel Bzp Metric

Vale® unlined pipe clamp steel BZP metric from Industrial Ancillaries. This steel BZP metric pipe clamp is unlined and available in sizes 15mm to 224mm.

Vale Rubber Lined Pipe Clamp Steel Bzp Metric

Vale® rubber lined pipe clamp steel BZP metric from Industrial Ancillaries. This steel BZP metric pipe clamp is available in sizes 15mm to 215mm.

Vale Brass Munsen Ring

Vale® brass munsen ring with Industrial Ancillaries. These brass Vale munsen rings are available in a range of OD sizes from 15mm to 54mm.

Vale Girder Clamp

Vale® girder clamp with Industrial Ancillaries. This girder clamp is bright zinc plated and available in metric thread sizes M8, M10 and M12.

Vale Crossover

Vale® Crossover is designed to form a 90° crossover joint. Industrial Ancillaries sell the Vale® Crossover

Vale Clamp On Cross Over

Vale® Clamp On Cross Over is designed to form a 90°. The Vale® Clamp On Cross Over can be used to existing structures.

Vale Swivel Short Tee

Vale® Swivel Short Tee is used in pairs. Industrial Ancillaries sell the Vale® Swivel Short Tee.

Vale Side Support Horizontal Base

Vale® Side Support Horizontal Base sold by IA. The Vale® Side Support Horizontal Base is an alternative to 144.

Vale Single Hole Bridge Clamp

Vale® single hole bridge clamp from Industrial Ancillaries. The metric single hole bridge clamp is available in sizes ranging from 6mm to 50mm.

Vale Double Hole Bridge Clamp

Vale® double hole bridge clamp from Industrial Ancillaries. The metric double hole bridge clamp is available in sizes ranging from 8mm to 63mm.

Vale Single Swivel Combination Female Part

Vale® Single Swivel Combination is a Female Part. The Vale® Single Swivel Combination Female Part can be supplied pre assembled.

Vale Channel Nut

Vale® channel nut with Industrial Ancillaries. This channel nut is for use in conjunction with channel saddle clips. Available in metric threads M6 and M8.

Vale Two Bolt Saddle Clamp

The Vale® Two Bolt Saddle Clamp is part of the Industrial Ancillaries professional range of Vale® fittings.
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

Two Bolt Saddle Clamp 39MM-49MM

Vale School Board Clamp Galvanised

Galvanised Vale® school board clamp with Industrial Ancillaries. This galvanised school board clamp is available in a variety of sizes ranging from 1/4 to 4.
Note: Image is for illustrative purposes only and may differ from the actual product

3/4NB School Board Clamp Malleable Iron Galvanised

Vale School Board Clamp Black

Black Vale® school board clamp with Industrial Ancillaries. This black school board clamp is available in a variety of sizes ranging from 1/4 to 4.
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

1 1/2NB School Board Clamp Malleable Iron Black

Vale Brass Schoolboard Clamps

Vale® brass schoolboard clamps with Industrial Ancillaries. These brass Vale schoolboard clamps are available in a range of OD sizes from 15mm to 54mm.
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

35MM School Board Clip Brass SBC35MB

Vale Stainless Steel Saddle Clip

Vale® stainless steel saddle clips from Industrial Ancillaries. These stainless steel saddle clips are available as 1 or 2 way with OD sizes 6mm to 12mm.
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

12MM OD Saddle Clamp Stainless Steel PCM12SS

Vale Unlined Pipe Clamp Steel Bzp Metric

Vale® unlined pipe clamp steel BZP metric from Industrial Ancillaries. This steel BZP metric pipe clamp is unlined and available in sizes 15mm to 224mm.
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

168MM-175MM Unlined Clip BZP M10 PC168-175U

60MM-64MM Unlined Clip BZP M8

Vale Rubber Lined Pipe Clamp Steel Bzp Metric

Vale® rubber lined pipe clamp steel BZP metric from Industrial Ancillaries. This steel BZP metric pipe clamp is available in sizes 15mm to 215mm.
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

148MM-152MM Rubber Lined Clip BZP M10

26MM-30MM Rubber Lined Clip BZP M8

Vale Munsen Ring With Bspp Thread Galvanised

Galvanised Vale® munsen ring with BSPP thread with Industrial Ancillaries. This galvanised munsen ring with BSPP thread is available in sizes from 1/4” to 4”.
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

1/2NB Munsen Ring 1/4 BSP Malleable Iron Galvanised MUN8G-BSP

Vale Brass Munsen Ring

Vale® brass munsen ring with Industrial Ancillaries. These brass Vale munsen rings are available in a range of OD sizes from 15mm to 54mm.
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

35MM OD Munsen Ring M10 Brass MUN35B

Vale Girder Clamp

Vale® girder clamp with Industrial Ancillaries. This girder clamp is bright zinc plated and available in metric thread sizes M8, M10 and M12.
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

MI12GC M12 Girder Clamp BZP

Vale Crossover

Vale® Crossover is designed to form a 90° crossover joint. Industrial Ancillaries sell the Vale® Crossover
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

3/4NB (26.9MM OD) Handrail Offset 90 Degree Crossover

Vale Clamp On Cross Over

Vale® Clamp On Cross Over is designed to form a 90°. The Vale® Clamp On Cross Over can be used to existing structures.
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

1NB (33.7MM OD) Handrail Retro Fit Clamp On Tee HR160-B34

Vale Swivel Short Tee

Vale® Swivel Short Tee is used in pairs. Industrial Ancillaries sell the Vale® Swivel Short Tee.
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

1NB (33.7MM OD) Handrail Short Swivel Inline Tee HR148-B34

Vale Side Support Horizontal Base

Vale® Side Support Horizontal Base sold by IA. The Vale® Side Support Horizontal Base is an alternative to 144.
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

1NB (33.7MM OD) Handrail Non Str Offset Side Palm Fixing HR145-B34

Vale Single Hole Bridge Clamp

Vale® single hole bridge clamp from Industrial Ancillaries. The metric single hole bridge clamp is available in sizes ranging from 6mm to 50mm.
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

16MM OD Bridge Clamp Single Hole

Vale Double Hole Bridge Clamp

Vale® double hole bridge clamp from Industrial Ancillaries. The metric double hole bridge clamp is available in sizes ranging from 8mm to 63mm.
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

37MM OD Bridge Clamp Double Hole

Vale Single Swivel Combination Female Part

Vale® Single Swivel Combination is a Female Part. The Vale® Single Swivel Combination Female Part can be supplied pre assembled.
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

3/4NB (26.9MM OD) Handrail Single Female Swivel

Vale Channel Nut

Vale® channel nut with Industrial Ancillaries. This channel nut is for use in conjunction with channel saddle clips. Available in metric threads M6 and M8.
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

Browse our original Vale products in Plumbing Accessories

We suggest upgrading to Chrome