CheckoutPage-BeforeYouGo

show

Discount-PromoLabel

hide

FamilyPage-Attribute-Selector

VariantThreeDropDown

Header-MainMenu

InfoPage-DiscountCodes

experiment_1

MyaccountPage_Recommendations

New_Login_Registration_Toggle

ProductPage_Bundle

three_products

ProductPage-Attribute-Selector

ProductPage-Pills-Visibility

Expanded

Quick_View

test

Recommendations

control

Recommendations_Limits

LIMIT_20

Search-Engine

Rerank

SearchPage_Top_Category

Default

SearchPage-Enable-Sort-Attribute-Value

AttributeValueSortOnSearchAndCategory

SearchPage-LeadTimeFilter

TopProducts-AddToBasket

Vertical-Recommendations_Toggle

Have a job that requires multiple angles in both left and right direction? If so the BS-350M horizontal band saw might just be the right choice for you. This dual mitering saw has a full cast iron head and bow that swivels 60° right and 45° left. The BS-350M has a 90° round capacity of 267mm, making this the perfect saw for almost any fabrication shop.\n\nThe BS-350M features a 3hp motor which is driven by an AC inverter built to deliver the reliability that most shops demand.\n\nThe BS-350M is built to make the straightest, highest quality cuts on the market. This is achieved through the use of the best materials, such as fully cast iron that is machined to exacting tolerances as well as precision ball bearing guides, which provide the most accurate cuts and long blade life. A full flood coolant system is also standard on the BS-350M.\n\nOperation of the BS-350M is easy as well; there are two mode of operation depending on you preference. The first option is manual descent for small production runs. The operator simply turns on the machine with a trigger switch in the descent handle, and manually guides the bandsaw blade through the material. This mode is perfect for the small or medium sized fabricators needs. The second option is to use the hydraulic descent. The hydraulic descent has a down feed adjustment for feed pressure, and is perfect for larger production runs, increases blade life and reduces operator fatigue.

BS-350M Dual Mitering Bandsaw 440V

Over the years the BS-260M dual mitering band saw has gone through a number of changes.  Once again we have improved it and made it even better.  Gone is the day of the DC driver board to adjust the blade speed, now the BS-260M has an AC inverter for even better control and reliability, the best part is that it still is powered by only 220V, 50Hz, 1-phase single phase so it can be used just about anywhere. \n\nThe gear driven BS-260M is a 9" (229 mm) Band Saw is the perfect saw for cutting at 90 degrees or miter angles. This saw has a dual angle head capable of cutting 0-60 degrees (R) and 0-45 (L), making it one of the most versatile saws on the market. Quick releases head lock allows the operator to change the miter angle in seconds.\n\nThe BS-260M band saw is made form only the best materials for long production life.  The saw bow and pivot is made from solid cast iron to ensure the straightest of cuts with little to no vibration.  A total of eight precision ball bearings are provided to keep the blade in line as well.  The BS-260M also has a powerful coolant system and a broken blade tensioning device that shuts down the machine if the blade breaks for safety.\n\nOperation of the BS-260M is easy as well; there are two mode of operation depending on you preference. 1- Manual descent for small production runs. The operator simply turns on the machine via a trigger switch in the descent handle, and manually guides the band saw blade through the material this mode is perfect for the small or medium sized fabricators needs.  2- Hydraulic descent for larger production runs increases blade life and reduces operator fatigue. The hydraulic descent has a down feed adjustment for feed pressure.

BS-260M Dual Mitering Bandsaw

Mitre Saws

Mitre Saws - Free UK Delivery Over £25 - Buy Online | Zoro

Dual Mitering Bandsaws