Brand

Rating

Price

Special Offers

Product Type

Diameter

Type

Overall Length

Power Drills - Free UK Delivery Over £25 - Buy Online | Zoro

55mm Bormax 2.0 Prima Pilot Drill Long Version, 1614055 Bormax 2.0 prima with exchangable centre point and pre-drill. Clean drilling in Soft wood, European Hard wood, chipboard and MDF.  Two in reverse order staggered, grooved main cutting edges, a circumferencial cutting edge with longitudinal grooves-both effecting that a clear less feed force is necessary. Also they minimize the friction and the growth heat., 1614, 161405500

55mm Bormax 2.0 Prima Pilot Drill Long Version, 1614055

40mm Disc and Plug Cutter, 1616040 Made InGermany ,For the production of plugs for filling knot holes of fixings partial wood damage in comination with Bormax. For precise fitting use drill bits., 1616, 161604000

40mm Disc and Plug Cutter, 1616040

Depth Stop For Bormax Series 1622/1623/1630/1663, 42 - 48mm, 1621116 Depth stop supported by ball bearing for FAMAG-Forstner bits with exchangeable guide bushings. The depth stop is mounted on the stalk and the drilling depth has to be adjusted. This makes it possible to drill stud holes with exactly the same depth at all times. The bushings are rotatably supported by ball bearings and thus produce no disturbing marks on the workpiece surface, Drills- Ø 42-48mm  1621, 162111600

Depth Stop for Bormax Series 1622/1623/1630/1663, 42 - 48mm, 1621116

20mm Carbide Tip TCT Disc and Plug Cutter, 1616120 TCT- DISC, Made InGermany ,For the production of plugs for filling knot holes of fixings partial wood damage in comination with Bormax. For precise fitting use drill bits., 1616, 161612000

20mm Carbide Tip TCT Disc and Plug Cutter, 1616120

22 mm Guding Pin For Bormax 2.0 Prima 1614 Long Series 44.45mm - 120mm, 1619022 Stepped guiding pin with shank of 8 or 10mm x 25mm, to be used with counterbore product line 1614 or 1618. Ensure the good guidance of the counterbore tool., 1619, 161902200

22mm Guding Pin for Bormax 2.0 Prima 1614 Long Series 44.45mm - 120mm, 1619022

Adjustable Depth Stop for Bormax 2.0 Prima 1614 long Series 40-90mm, 1619100 Stepped guiding pin with shank of 8 or 10mm x 25mm, to be used with counterbore product line 1614 or 1618. Ensure the good guidance of the counterbore tool., 1619, 161910000

Adjustable Depth Stop for Bormax 2.0 Prima 1614 Long Series 40-90mm, 1619100

HSS Replacement Centre Drill Bit 20mm - 40mm 1614 Long Series 1619208 Stepped guiding pin with shank of 8 or 10mm x 25mm, to be used with counterbore product line 1614 or 1618. Ensure the good guidance of the counterbore tool., 1619, 161920800

HSS Replacement Centre Drill Bit 20mm - 40mm 1614 Long Series 1619208

Replacement Guide Bush for 1621110 Depth Stop, 1621010 Depth stop supported by ball bearing for FAMAG-Forstner bits with exchangeable guide bushings. The depth stop is mounted on the stalk and the drilling depth has to be adjusted. This makes it possible to drill stud holes with exactly the same depth at all times. The bushings are rotatably supported by ball bearings and thus produce no disturbing marks on the workpiece surface, 1621, 162101000

Replacement Guide Bush for 1621110 Depth Stop, 1621010

7pcs Depth Stop Set For Bormax Series 1622/1630/1663, 10 - 48mm in wooden box, 1621200 Depth stop supported by ball bearing for FAMAG-Forstner bits with exchangeable guide bushings. The depth stop is mounted on the stalk and the drilling depth has to be adjusted. This makes it possible to drill stud holes with exactly the same depth at all times. The bushings are rotatably supported by ball bearings and thus produce no disturbing marks on the workpiece surface, drills Ø10-48mm ,  1621, 162120000

7PCS Depth Stop Set for Bormax Series 1622/1630/1663, 10 - 48mm in Wooden Box, 1621200

4mm Replacement HSS-Ground Pre Drill Bit Bormax 1624 Series Pack of 4, 1624004 The pilot-drill bit is ideal for drilling at an angle which is not 90° in workpieces sufaces. Can be used with the centre point as traditinal Bormax., 1624, 162410400

4mm Replacement HSS-Ground Pre Drill Bit Bormax 1624 Series, Pack of 4, 1624004

4mm Replacement Centre Point Bits Bormax 1624 Series Pack of 4, 1624105 The pilot-drill bit is ideal for drilling at an angle which is not 90° in workpieces sufaces. Can be used with the centre point as traditinal Bormax.  TCT BORMAX PRIMA, 1624, 162410500
Note: Image is for illustrative purposes only and may differ from the actual product

4mm Replacement Centre Point Bits Bormax 1624 Series, Pack of 4, 1624105

Bormax 2.0 Prima Pilot Guided , 16,2mm, incl centre point, pre-drill, 1624162 The pilot-drill bit is ideal for drilling at an angle which is not 90° in workpieces sufaces. Can be used with the centre point as traditinal Bormax., 1624, 162416200

Bormax 2.0 Prima Pilot Guided, 16, 2mm, Includes Centre Point, Pre-drill, 1624162

Centre drill HSS, for ref 2160,OØ8mm,OAL120mm, F216030800 Carbide tipped hole saw, the saw body is made of tempered steel. Internal thread M16 for intake of the shank. Maximum cutting depth 60 mm. Drilling in plaster boards, aerated concrete, plastics, chipboards and plywood. Please order shanks and centre drills seperately, 2160, 216030800

Centre Drill HSS, for Ref 2160, O 8MM, OAL120MM, F216030800

High quality drill bit - countersink set with rotating depth stop (brass). Depth of pre-drill is adjustable. Countersink angle 60°. This set is particularly well suited for terrace construction. It makes it easy to drill screwholes and to countersink them properly and accurate in the terrace boards. The depth stop is rotatably mounted and stops when it touches the workpiece. This prevents the depth stop from leaving marks on the terrace boards., 3577, 357715000

Single Pre Drill 5mm - F3577150

High quality drill bit - countersink set with rotating depth stop (brass). Depth of pre-drill is adjustable. Countersink angle 60°. This set is particularly well suited for terrace construction. It makes it easy to drill screwholes and to countersink them properly and accurate in the terrace boards. The depth stop is rotatably mounted and stops when it touches the workpiece. This prevents the depth stop from leaving marks on the terrace boards., 3577, 357721200

Single Depth Stop, Rotationally Supported

twist drill, HSS, incl depth stop, F188605000 Three-step machine drill bit with brad point and protruding cutting edges. For pre-drilling and countersinking holes in one single operation, 1880, 188605000

Twist Drill, HSS, Incl Depth Stop, F188605000

2" - 50.8 mm Bormax 2.0 Prima Pilot Drill Long Version, 1614241 Bormax 2.0 prima with exchangable centre point and pre-drill. Clean drilling in Soft wood, European Hard wood, chipboard and MDF.  Two in reverse order staggered, grooved main cutting edges, a circumferencial cutting edge with longitudinal grooves-both effecting that a clear less feed force is necessary. Also they minimize the friction and the growth heat., 1614, 161424100

2" - 50.8 MM Bormax 2.0 Prima Pilot Drill Long Version, 1614241

5pcs Disc and Plug Cutter Set in Wooden Box, 1616505 Made InGermany ,For the production of plugs for filling knot holes of fixings partial wood damage in comination with Bormax. For precise fitting use drill bits., 1616, 161650500

5PCS Disc and Plug Cutter Set in Wooden Box, 1616505

12mm Step Drill For Spy Hole 1880001 Two-step drill bit. Pre-drill bit with point angle, core drill with two taper taps. For drilling tear free and exact holes for inserting a spyhole. Details according to the drawingFor drilling tear free and exact holes for inserting a spyhole. Details according to the drawing, 1775, 188000100

12MM Step Drill for Spy Hole 1880001

twist drill, HSS, without depth stop, F188615000 Three-step machine drill bit with brad point and protruding cutting edges. For pre-drilling and countersinking holes in one single operation, 1886, 188615000

Twist Drill, HSS, Without Depth Stop, F188615000

Centre drill,carbide tipped, for ref 2160, OØ10mm, OAL130 mm, F216030700 Carbide tipped hole saw, the saw body is made of tempered steel. Internal thread M16 for intake of the shank. Maximum cutting depth 60 mm. Drilling in plaster boards, aerated concrete, plastics, chipboards and plywood. Please order shanks and centre drills seperately, 2160, 216030700

Centre Drill, Carbide Tipped, for Ref 2160, O 10MM, OAL130 MM, F216030700

Scheduled_Orders

Browse our original FAMAG products in Power Drills

We suggest upgrading to Chrome