Brand

Rating

Price

Special Offers

Handle Type

Length

Type

Width

Maun all-purpose Steel Straight Edge for marking lines on wallpaper, floor coverings and leather. Crafted from high-quality carbon steel for durability. Surface ground for a smooth, comfortable finish. Its bevelled edge provides unobstructed vision allowing you to mark straight lines with matchless accuracy. Thickness ensures safety when using a metal scriber. Stays firmly in place for improved precision when marking or scoring.  Packed in a clear plastic wallet with anti-rust paper. With a single 6mm diameter hanging hole for easy storage.  Made in England. Standard 12 months' warranty. Register your tool to extend this to 2 years.

Maun Diagonal Cutting Pliers with a compound-lever action that multiplies hand force by 18 to reduce effort when cutting. Cuts hard, piano and dental wire with minimal effort. Built to last, with a robust construction and rust-proof finish. Its jaws have been induction-hardened to HRC 64, precisely shaped for durability and accuracy. Fitted with Zinc-plated handles, detailing provides added grip.  Also commonly known as side cutters, these diagonal cutters are versatile for use by professionals and DIY enthusiasts, ideal for:  Dental laboratories and practices for cutting dental wire.Jewellers, hobbyists and craft workers for cutting wire.Piano technicians for cutting piano wire.Engineers and mechanics for general hard wire cutting.Electricians for cutting small diameter electrical cable and wire. WARNING: this tool must NOT be used on live electrical wire.  Made in England. Standard 12 months' warranty. Register your tool to extend this to 2 years.  Conforms to BS 3087-7:1996, ISO 5747:1995.

The Maun Wad Punch Kit is a versatile tool for all your punching needs. Perfect for making precisely shaped gaskets and washers, cutting precise holes and shapes. All you need in one complete set. Punch both inner and outer holes for washers and gaskets. Works on a range of soft materials, including felt, rubber, leather, plastic and cork.  Made to last, with a robust construction and rust-proof finish. Chemically blackened handle and punches for long life. The centre punch case has been hardened to HRC 57 for durability. Whilst the punches have been ground to a fine cutting edge, then hardened and tempered to HRC 45 for durability.  The handle has been fully heat-treated to withstand hammer or mattet blows. Its also comfortable to use over long periods. All included punch sizes fit onto one handle. The interchangeable punches easily screw onto handle for quick changes. A spring-loaded plunger accurately positions centre of hole and ejects the slug.  The Maun Wad Punch Kit (or hollow punch set) is suplied in a lightweight polyprolylene storage box. Great for professional craftsmen and serious DIY-ers. Ideal for:  -Vintage vehicle maintenance and restoration enthusiasts for making water pump gaskets and washers.-Floor covering technicians for replacing/repairing marked or damaged spots on cork or vinyl flooring.- Leather crafters for cutting precise holes in a workpiece.  Made in England. Standard 12 months' warranty. Register your tool to extend this to 2 years.

The Maun Metal Safety Rule has been crafted from high-quality stainless steel for a long, corrosion-free life. Easy-to-read scale graduations. Its M-shaped profile allows fingers to be positioned in the recessed area away from the cutting edge. Lightweight and easy to handle. A durable alternative to plastic and wooden rulers.  Measuring, scoring and cutting. All done with safety in mind.  Made in England. Standard 12 months' warranty. Register your tool to extend this to 2 years.

The Maun Olive Cutter Tool removes a compression olive, ring or ferrule fast, without damaging the copper pipe. A reliable cut every time, with minimal hand pressure. No more costly damage to pipes and no swarf produced. More reliable and accurate than a hacksaw or olive puller.  Made to last, with a robust construction and rust-proof finish. Its high-quality steel cutting blades have been hardened and tempered to HRC 45. The Zinc-plated handles are fitted with soft plastic grips for added comfort. They also feature a reliable return-spring handle action. Multiplies hand force by 15 for less cutting effort.  Designed to cut compression fittings from copper water pipes. Ideal for:  Professional plumbers, especially when moving radiators.Serious DIY-ers tackling similar jobs.  Made in England. Standard 12 months' warranty. Register your tool to extend this to 2 years.

Carbon Steel Straight Edge for accurate marking out with a carpenters pencil or metal scriber. Case hardened to HRC 57 for durability. Surface ground for a smooth, comfortable finish. With a single 6mm diameter hanging hole for easy storage. Accuracy is 0.01% of the length of the straight edge. Made in England. Standard 12 months' warranty. Register your tool to extend this to 2 years. Size 1200 x 50 x 6mm (48 x 2 x 1/4in).

Carbon Steel Straight Edge 120cm (48in) MAU170148

Maun Diagonal Cutting Pliers with a compound-lever action that multiplies hand force by 18 to reduce effort when cutting. Cuts hard wire with minimal effort. Whilst requiring less effort than conventional pliers of the same size. Easy to operate, regardless of your hand size. Built to last, with a robust construction and rust-proof finish. Its jaws are induction-hardened to HRC 64, precisely shaped for durability and accuracy. Fitted with a long-lasting return spring. Made in England. Conforms to BS 3087-71996, ISO 57471995. Comes with a standard 12 months' warranty. Register your tool to extend this to 2 years. Maun Diagonal Cutting Pliers with Zinc-plated handles and detailing for added grip. Specification Overall Length 140mm (5.1/2in) Jaw Opening 10mm Jaw Width 8mm Cutting Capacity Piano Wire 1.6mm & Oslash, Hard Wire 2.0mm & Oslash, Soft Wire 3.0mm & Oslash

Diagonal Cutting Pliers 140mm (5.1/2in) MAU2990140

Kits comprise of a single wad punch handle onto which screws a series of nine interchangeable punches. The handles are blackened and punches heat treated and chemically blacked. The handle should be struck with a hammer or mallet onto a wooden block. The spring loaded plunger in the handle enables holes to be accurately centred and serves to eject the slug. The metric set contains 5, 6, 8, 10, 12.5, 16, 20, 25 and 32mm sizes. The imperial set contains 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8 and 1in sizes. Set contains 5,6,8,10,12.5,16,20,25 and 32mm sizes.

Metric Wad Punch Kit 1000/05 MAUWPKM

The Maun Stationers Punch will punch up to 25 sheets of 80g/m paper in one operation, providing a clean punch every time, even when piercing multiple sheets of paper. No more punch jamming in the pierced hole. Built to last, with a robust construction and rust-proof finish, this precision-ground punch is case hardened to HRC 57. The punch and handles are zinc plated, with detailing on handles for added grip. Fitted with a return spring for easy operation, and made in England. Specification Punch Diameter 6.4mm (1/4in). Jaw Length 32mm (1.1/4in). Overall Length 200mm (8.1/4in).

Stationers Punch 200mm (8.1/4in) MAU2160200

The Maun Eyelet Puncher & Fixing Pliers combine two jobs in one sturdy tool. Punch through materials and fix eyelets in one smooth operation. Built to last, with a robust construction and rust-proof finish. The jaws feature tapered bushes for precision setting of the eyelet dies. Eyelet dies are case hardened to HRC 57 for durability. The Zinc-plated handles feature detailing for added grip and a long-lasting return spring. Use this eyelet puncher to punch and fix eyelets into thin materials such as fabric, leather, canvas, thin plastics and card. Designed for use with 4mm (5/32in) inside barrel diameter eyelets ONLY. Made in England. Comes with a standard 12 months' warranty. Register your tool to extend this to 2 years. Specification Overall Length 200mm Useable Jaw Length 35mm 1 x Maun Eyelet Puncher & Fixing Pliers 165mm

Eyelet Puncher & Fixing Pliers 165mm MAU2570165

This Maun Shear Nose Soft Wire Cutter is ideal for the horticultural industry and craft work. It will easily cut up to 3mm diameter of soft wire, and is comfortable, easy to use, with a high leverage design for minimal effort when cutting. This cutter has a compact, lightweight design and has a double action cutter for trimming wire ends to equal lengths. The jaws are machine ground, and its case is hardened to HRC57 for durability. The cutter has zinc plated jaws and handles, with detailing for added grip. Length 100mm. Width 30mm. Cutting Capacity soft wire 3mm diameter.

Shear Nose Wire Cutter 100mm (4in) MAU2850100

These Maun End Cutting Nippers are suitable for repetitive cutting of hard wire. The high leverage design cuts the wire with minimal effort. The induction hardened cutting edges to HRC 64 offer durability and a long-life service, they give an unrivalled cutting performance and easily cuts wires close to objects. They have precision ground sharp cutting jaw edges which will cut through a range of hard materials including & ndash springs, nails, rivets and bolts. These cutters are built to last with a robust construction and rust proof finish. The compound lever action multiplies hand force by 14 for less cutting effort. The handles are zinc plated with detailing for added grip, and have a long-lasting return spring. The applications include - repetitive & lsquotop cutting&rsquo of springs in mattress and bed production, and wire spring making. The nippers also are useful for cutting hard wire in various metal-fabrication operations (such as annealed tie wire used on reinforced rods or braided reinforced concrete mesh). They are suitable for skilled tradespeople with demanding standards and serious DIY-ers, made in England. Conforms to BS 3087-71996, ISO 57471995. Comes with a standard 12 months' warranty. Register your tool to extend this to 2 years. Specification Overall Length 150mm (6in). Cutting Capacity Piano Wire 1.6mm & Oslash, Hard Wire 2.0mm & Oslash.

End Cutting Nipper 150mm (6in) MAU3010150

Smooth jaw parallel snipe nose plier ideal for work in confined areas.Size: 125mm (5in).

Snipe Nose Pliers Smooth Jaw 125mm (5in)

Maun Flat Nose Pliers with serrated jaws for a vice-like grip on square and hexagonal fastenings. Jaws move in parallel throughout use and grip securely along their whole length. They are able to manipulate, straighten and remove kinks in wire. Built to last, with a robust construction and rust-proof finish. The jaws have been case hardened to HRC 57 for added durability. There is a V-slot to feed and hold wire and rod securely along jaw length. Wire can also be threaded down throat of plier. Zinc-plated handles with detailing provide added grip. A toolbox essential, with rugged construction, ideal for electrician's, field technician's, field and manufacturing maintece engineer's and serious DIY-ers. Made in England. Conforms to BS 3087-71996, ISO 57471995. Comes with a standard 12 months' warranty. Register your tool to extend this to 2 years. Specification Overall Length 160mm Jaw Opening 14mm Jaw Width 9mm Usable Jaw Length 34mm

Flat Nose Pliers Serrated Jaw 160mm (6.1/4in) MAU4860160

This high leverage side cutting plier has serrated flat jaws with a built-in cutter on the side which is capable of cutting ISO standard piano wire. Size 165mm (6 1/2 in).

Side Cutting Pliers 160mm (6.1/4in) MAU4950160

Side Cutting Pliers with Return Spring 160mm (6.1/4in)

The Maun Metal Safety Rule has a unique M profile which keeps the fingers well away from any knife edge when used for cutting or scoring card, etc. Manufactured from stainless steel for a long, corrosion-free life. With easy-to-read scale graduations. Lightweight and easy to handle, a durable alternative to plastic and wooden rulers. Ideal for everyday use in education, hobbies, craftwork and design. Made in England. Comes with a standard 12 months' warranty. Register your tool to extend this to 2 years. This Maun Metal Safety Rule features an imperial scale.

Our Official Maun Product Range

We suggest upgrading to Chrome