LeadTime

Brand

Rating

Price

Special Offers

Colour

Overall Length

Overall Width

Prominent coloured stripes provide advance warning of a hazard ahead. With these protectors it's no longer necessary to use adhesive safety tape to stick cables to the floor, as the hazard warning profiles have clearly built in coloured stripes along the length of each edge.

Features:
•Halogen free in the event of fire
•Low smoke, non-toxic fume levels
•UV stabilised for extended outdoor life
•Latex free, ideal for hospitals
•Easily reusable when needed
•Fire tested to BS476 part 7 class 3
•Tested for non-conductivity to BS903 C5500v

Designed to protect data, phone and electrical cables up to 16mm in spacious compartments.

In addition to the Snap Fit membrane in the base, the MCP profiles have a unique ridged, anti slip top section.

The BNC profiles have been designed to allow power and data to lay in parallel with a semi rigid separator running the length of the profile preventing electromagnetic interference.

• Fire tested to BS 476 Part 7 Class 3.
• Halogen free in the event of fire.
• Low smoke, non toxic and low fume emission levels
• Tested for non conductivity to BS903-C5, 500V
• UV stabilised for extended outdoor life.

This striking range enhances safety at work

A highly visible, safe and tidy solution for a hazard free environment. Featuring a Snap Fit membrane for ease of installation. Eye catching warning stripes running along each side of the profile for maximum visibility.

Available in 9m lengths.

• Fire tested to BS 476 Part 7 Class 3
• Halogen free in the event of fire
• Low smoke, non toxic and low fume emission levels
• Tested for non conductivity to BS903-C5, 500V
• UV stabilised for extended outdoor life
•  Fast and simple installation

CableSafe ORIGINAL - Hard wearing, easy to fit, flexible rubber cable protectors for use indoors or out, available in black, grey or yellow. Easy to fit, push in the cables through the pre-slit base and lay in position. Available in 3m & 9m lengths.
Colours available: Black, Grey or Yellow

Specially designed to protect cables, pipes and hoses in harsh industrial environments.

Suitable for all types of industrial and outdoor applications from computer rooms to warehouses, machine shops and construction sites.

These tough profiles are designed to protect power cables and cable bundles from physical damage particularly in areas where there there is frequent vehicle movement.

• Fire tested to BS 476 Part 7 Class 3
• Halogen free in the event of fire
• Low smoke, non toxic and low fume emission levels
• Tested for non conductivity to BS903-C5, 500V
• UV stabilised for extended life

This unique range of TTCs are two products in one, a traffic speed controller and heavy duty cable protector covering power or cable bundles up to 56 x 27mm.

Yellow hazard stripes on both sides of the profile are clearly visible, giving early warning to fork lift truck and lorry drivers of the danger of speed in confined areas.

Rugged construction combined with an inherent flexibility means that these strong profiles withstand the passage of most loaded vehicles whilst keeping the cables safe and secure.

These very special products can easily be relaid in another location as required.

Lay flat, no drilling or bolting, ready to use in minutes.

• Fire tested to BS 476 Part 7 Class 3.
• Halogen free in the event of fire.
• Low smoke, non toxic and low fume emission levels.
• Tested for non conductivity to BS903-C5, 500V.
• UV stabilised for extended outdoor life.
• Eye catching warning stripes running along each side of the profile for maximum visibility.

Snap" open the membrane in the base of the profile, push in the cable and lay the protector in place.

A Snap Fit product is perfect for securing any loose, straggling leads or cables in offices, shops or where ever the public is in potential danger of tripping and falling.


• Fire tested to BS 476 Part 7 Class 3.
• Halogen free in the event of fire.
• Low smoke, non toxic and low fume emission levels.
• Tested for non conductivity to BS903-C5, 500V.
• UV stabilised for extended outdoor life.
• Available in 9m Lengths.

Prominent coloured stripes provide advance warning of a hazard ahead. With these protectors it's no longer necessary to use adhesive safety tape to stick cables to the floor, as the hazard warning profiles have clearly built in coloured stripes along the length of each edge.

Features:
•Halogen free in the event of fire
•Low smoke, non-toxic fume levels
•UV stabilised for extended outdoor life
•Latex free, ideal for hospitals
•Easily reusable when needed
•Fire tested to BS476 part 7 class 3
•Tested for non-conductivity to BS903 C5500v

26400303 Haz/1 Black/Yellow 8 x 14mm Hole 3m Cable Protector

The yellow/black cable protector provides a practical and safe solution for securing cables on pavements and walkways, making it ideal for temporary cable management. Its interlinking design allows for easy setup, and it features two large compartments for power or cable bundles. The highly visible yellow hinged lid enables cables to be inserted after positioning the ramps, offering convenience. Suitable for pavement or walkway maintenance, it ensures a secure and visible solution for pedestrian areas.

Features and Benefits:
• Safe and practical cable protection for pavements and walkways
• Two large compartments for cable bundles
• Yellow hinged lid for easy cable insertion
• Optional fixing holes for permanent installation


Notes:
-Not suitable for use in conjunction with any form of vehicle traffic

Cable Protectors, Heavy Duty, Black/Yellow

Multi Compartment Cable Protectors
Coil length: 4.5* & 9.0m.

Type MCP/1
Available in black and grey in 9m lengths

Type MCP/2
Available in black and grey in 4.5m lengths

Snap Fit Type Mcp/1 9m Black Cable Protector

Industrial Cable Protectors
Specifically designed to resist the harsh environmental conditions of heavy duty outdoor use. Suitable for all types of industry. Designed to protect dangerous heavy duty cables. 
Coil lengths: Type F = 9.0m 
Type FF, FFF and G = 4.5m
Type H = 1.5m 
All cable protectors conform to 
BS476 Part 7 Class 3.

Type 2 Snap Fit Hazard Warning Flexible Cable Protectors - Black/Yellow

CableSafe ORIGINAL - Hard wearing, easy to fit, flexible rubber cable protectors for use indoors or out, available in black, grey or yellow. Easy to fit, push in the cables through the pre-slit base and lay in position. Available in 3m & 9m lengths.
Colours available: Black, Grey or Yellow

26401075 RO7B Black 10 x 30mm Hole Split Base 3m Cable Protector

Wheel chocks suitable for all applications within the aviation and road transport industries.

These hard wearing wheel chocks are produced from a tough grade of rubber compound to ensure that they are able to withstand the harsh conditions of these demanding industries.

The triangular chocks are rounded at the corners to prevent profile damage and are heavily ribbed on all three sides to aid grip.

Each rubber wheel chock is supplied fitted with an eyebolt and length of blue polypropylene rope to aid handling.

Length:250mm
Width:170mm.
Height:150mm.

26405000 Standard Wheel Chock 250 x 150 x 235mm

Type F Black Industrial Cable Protectors - 9m

Temporary Traffic Calmers
Two in one traffic speed controller and heavy duty cable protector. Yellow stripes on both sides make them clearly visible in dull conditions.
Coil lengths:
Type TTC1 and 2 = 4.5m 
Type TTC3 and 4 = 1.5m

Ttc/4 1.5M Black/Yellow Temporary Traffic Calming Cable Protectors

'Snap Fit' flexible cable protectors are designed for indoor and out door use.The Industrial range was developed principally for heavy duty work such as warehouse or building site applications. The Temporary Traffic Calmers fitted with yellow warning stripes can  also be  used as speed ramps or traffic calmers.

Contact your local branch for more details.
Coil length: 9.0m.
Colour: black (not illustrated).

Our Official Vulcascot Product Range

We suggest upgrading to Chrome