Brand

Rating

Price

Special Offers

Size

Applications

Motor

Power Supply

Rated Current

Voltage

Maximum Current

Overload Range

Power

Designed to switch and protect three-phase and single-phase electric motors. Direct on-line starter - three-phase (DLW) and single-phase (DLWM). Star-delta starter - enclosed (ESDW) and open (OSWM). 

Features: 
Starters in metallic or plastic enclosures. 
Wide power range. 
Available in various types of operation. (on+off; remote; reset; hand/off/auto switch). 
Reduced sizes and modern design. 
Fast and simple installation and maintenance. 
Projected and designed in compliance with IEC/EN 60947.

Aluminium frame motors - IE2 (High Efficiency) three-phase motors. These motors exceed the IE2 efficiency levels specified in the IEC 60034-30 and the requirements of the EuP-Directive 2005/32/EC. 
Thermisters fitted as standard in frame 132 and above. IP55 protection as standard (up to IP66 on request).

Standard features: Top mounted terminal box with metric cable entries. Interchangeable with IEC metric motors. Class F insulation with class B temperature rise. Metal covers and stainless steel nameplate.
Output: 0.12 to 500kW. 
Number of poles: 2, 4, 6 and 8.
Frequency: 50Hz.
Voltages: 220 - 240/380 - 415V (up to 100L). 
380 - 415/660V (from 112M and up). 
Frame sizes: 63 to 355.
Colour: RAL 5009 Blue.

Aluminium - B3 - Foot Mounted - 2 Pole - 3000rpm - AC 3 Phase

Soft-Starters are static starters that accelerate, decelerate and protect three phase induction motors. The control of the voltage applied to the motor by means of adjustments to the firing angle of thyristors allows the soft-starter to start and stop an electric motor smoothly. Easy parameter setting, simplyfies start-up and operation. Compact size optimises the space in electical panels. Incorporates all protections for the driven motor.

The WEG CFW series is intended for speed control of three-phase induction motors.

CFW-08
Easy to install and operate. Equipped with optimised software that can be easily set through a keypad, which enables the drive to process and control industrial machines. In addition, the CFW08 Plus series was designed with dead time compensation techniques, which avoids motor instability and provides torque increase at low speeds.
Standard Features:
IP20 and IP66 enclosure with V/Hz and sensorless vector control.
Single and three-phase input power supply 200 - 240V, input voltage.
150% current overload capacity (during 60s every 10min).
2.5/5/10/15kHz adjustable IGBT's switching frequency.
Protective Features: overcurrent, motor overload, drive over temperature, output phase-to-phase and phase-to-ground short circuit, DC bus over and undervoltage and external fault.
Control Features: linear and 'S' acceleration and deceleration ramps, local/remote control, DC braking, torque boost, motor slip compensation, electronic pot, preset speeds, adjustable V/Hz profile, maximum and minimum adjustable frequency limits, two skip frequencies, adjustableoutput current limit, JOG, ride-thru and flying start, process regulator - PID.
Applications: pumps, fans, blowers, mixers, conveyors, winding/unwinding.

CFW08 400V 3AC Variable Speed Drives IP66

The W22 is a range of three-phase induction motors which reduces energy consumption, noise, vibration and cost of ownership.With an aerodynamic frame, redesigned cooling system, unique WISE insulation system and new WSeal 'V' Ring with double lip and metallic cap, the W22 range of motors is quieter, more reliable, easier to maintain and more cost effective.

Aluminium IE3 Multi-Voltage 
Three Phase Motors
Aluminium frame motors - IE3 (Premium Efficiency) three-phase motors. These motors exceed the IE3 efficiency levels specified in the IEC 60034-30 and the requirements of the EuP-Directive 2005/32/EC. Thermisters fitted as standard in frame 132. 
IP55 protection as standard (up to IP66 on request).  

Standard features: Top mounted terminal box with metric cable entries. Interchangeable with IEC metric motors. Class F insulation with class B temperature rise. 
Metal covers and stainless steel nameplate.
Output: 0.12 to 500kW. 
Number of poles: 2, 4, 6 & 8.
Frequency: 50Hz.
Voltages: 220 - 240/380 - 
415V (up to 100L). 
380 - 415/660V (from 
112M and up). 
Frame sizes: 63 to 355.
Colour: RAL 6002 Green.

Aluminium 2 Pole 3000rpm Flange Mounted B5 IE3 Motors

The Vectrue Technology™ represents a significant advancement, allowing this new generation of WEG inverters to combine V/F, Sensorless Vector and Closed Loop Vector (with encoder) control techniques, all in one product. An innovation was also introduced to simplify applications that require braking torque. A new feature named Optimal Braking™ eliminates the need for the dynamic braking resistor in some applications allowing a simpler, more compact and economical solution.
Dimensions (H x W x D): 210 x 143 x 196mm.
Weight: 3.5kg.

Variable Speed Drives 
The WEG CFW series is intended for speed control of three-phase induction motors. Applications: Centrifugal Pumps, Process Pumps, Fans/Exhausters, Stirrers/Mixers, Extruding Machines, Conveyors, Roller Tables, Granulators, Pelletising Machines, Driers, Rotating Ovens, Rotating Filters, Winders, Unwinding Machines, Cutting and Welding Machines.

SSW-06 Series Soft-Starters are static starters intended to accelerate, decelerate and protection of three phase induction motors. The control of the voltage applied to the motor by the means of the thyristors triggering angle variation, allows the soft-start to start and stop smoothly an electric motor. With adequate adjustments of the variables, the torque produced is adjusted to the needs of the load, so the required current is going to be as low as possible for the starting procedure.

Standard Features: 220-575 or 575-690 V 50/60Hz input voltage supply. HMI with double display (LED 
& LCD). Built-in By-pass up to 820A. 

Soft-Starters
Soft-Starters are static starters that accelerate, decelerate and protect three phase induction motors. The control of the voltage applied to the motor allows the soft-starter to start and stop an electric motor smoothly.

Designed to switch and protect three-phase and single-phase electric motors. Direct on-line starter - three-phase (DLW) and single-phase (DLWM). Star-delta starter - enclosed (ESDW) and open (OSWM). 

Features: 
Starters in metallic or plastic enclosures. 
Wide power range. 
Available in various types of operation. (on+off; remote; reset; hand/off/auto switch). 
Reduced sizes and modern design. 
Fast and simple installation and maintenance. 
Projected and designed in compliance with IEC/EN 60947.

DLW-7D34P65-R04 Size 02 Direct On-Line-Starter

Aluminium frame motors - IE2 (High Efficiency) three-phase motors. These motors exceed the IE2 efficiency levels specified in the IEC 60034-30 and the requirements of the EuP-Directive 2005/32/EC. 
Thermisters fitted as standard in frame 132 and above. IP55 protection as standard (up to IP66 on request).

Standard features: Top mounted terminal box with metric cable entries. Interchangeable with IEC metric motors. Class F insulation with class B temperature rise. Metal covers and stainless steel nameplate.
Output: 0.12 to 500kW. 
Number of poles: 2, 4, 6 and 8.
Frequency: 50Hz.
Voltages: 220 - 240/380 - 415V (up to 100L). 
380 - 415/660V (from 112M and up). 
Frame sizes: 63 to 355.
Colour: RAL 5009 Blue.

Aluminium - B3 - Foot Mounted - 2 Pole - 3000rpm - AC 3 Phase

AL 3KW 2P 100L B3 IE2 230/400V 50HZ STD IP55

With DSP control (Digital Signal Processor) designed to supply an excellent perforfance during starting and stoppping electric motors with excellent cost/benefit ratio.

Dimensions 
(H x W x D): 
130 x 59 x 145mm.

Weight: 0.75kg.

SSW05 0023T 2246 EPZ Size 1 Electronic Soft Start

The WEG CFW series is intended for speed control of three-phase induction motors.

CFW500/CFW700
Human-machine interface (HMI) with backlit display and soft keys facilitates variable speed drive programming and operation
DC link inductors enable compliance with IEC61000-3-12 standard requirements regarding harmonics (no need for external line reactance). Intelligent thermal management permits full protection of IGBTs, monitoring of heatsink and internal air temperature. 
Automatic control of the heatsink fan, with speed sensor and easily detachable from the product for cleaning and maintenance. 
Normal duty and heavy duty ratings to adapt optimally to all kinds of load. Protection with fault and alarm warnings. With built-in dynamic brake chopper, RS485 - Modbus/RTU Communications and encoder input as standard.
Plug and Play philosophy allows quick and easy installation.
Motor overload protection in compliance with IEC 60947-4-2/UL 508 C.
Standard Features: 1.5 to 22kW, 380 - 480V Three Phase - 
See chart on page 1347 for full details.
Applications: extruders, centrifuges, winders, paper machines, overhead cranes, press feeders, pumps.

CFW500 Series Drive

CFW500 0.25KW 230V Variable Speed Drive

Cast iron frame motors - IE3 (Premium Efficiency) three-phase motors. These motors exceed the IE3 New European Minimum Energy Performance Standard (EU MEPS). Thermisters fitted as standard in frame 160 and above. IP55 protection as standard (up to IP66 on request).

AL 1.1KW 2P 80 B5T IE3 230/400V 50HZ STD IP55

The Vectrue Technology? represents a significant advancement, allowing this new generation of WEG inverters to combine V/F, Sensorless Vector and Closed Loop Vector (with encoder) control techniques, all in one product. An innovation was also introduced to simplify applications that require braking torque. A new feature named Optimal Braking? eliminates the need for the dynamic braking resistor in some applications allowing a simpler, more compact and economical solution.

Dimensions 
(H x W x D): 
210 x 143 x 196mm.

Weight: 3.5kg.

CFW09 0009T 3848 ESZ Size 1 Variable Speed Drive

The torque produced is adjusted to the needs of the load, so the required current is as low as possible for the starting procedure. The built-in pump Control funtion allows an efficient control over pups, avoiding overshoots.

Dimensions 
(H x W x D): 
256 x 130 x 182mm.

Weight: 3.3kg.

SSW06 0030T 2257 ESZ Size 1 Electronic Soft Start

SSW-06 Series Soft-Starters are static starters intended to accelerate, decelerate and protection of three phase induction motors. The control of the voltage applied to the motor by the means of the thyristors triggering angle variation, allows the soft-start to start and stop smoothly an electric motor. With adequate adjustments of the variables, the torque produced is adjusted to the needs of the load, so the required current is going to be as low as possible for the starting procedure.

Standard Features: 220-575 or 575-690 V 50/60Hz input voltage supply. HMI with double display (LED 
& LCD). Built-in By-pass up to 820A. 

Soft-Starters
Soft-Starters are static starters that accelerate, decelerate and protect three phase induction motors. The control of the voltage applied to the motor allows the soft-starter to start and stop an electric motor smoothly.

Our Official Weg Product Range

We suggest upgrading to Chrome