Brand

Rating

Price

Special Offers

Type

Size

Finish

Pack Quantity

Nailer & Brad Nails - Free UK Delivery Over £25 - Buy Online | Zoro

High carbon Zinc Dichromate HCFN finish nail 15 gauge. For use with Bostitch concrete block nailer.

Finish nails and brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank, ensuring that their holding power is enhanced. Applications include partition walls, shop and bar fitting, light framing and timber construction and most second fit applications.  For use with N62FN-1, N62FNB-E & N62FNK-2 models.  Note: This nail will also fit the N60FN and the N59FNK models.  Applications - Partition walls, shop and bar fitting, light framing and timber construction and most second fit applications.  25° collation angle

BT Series galvanised 18 gauge brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together.  Finish nails (brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.

Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries.  All Coil Nails are Round Head nails.  Typically:  Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails.  Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails.  Roofing nail coils contain 120 nails, due to the extra large diameter of the head.  15° Collation angle  Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail.  Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.  Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.  For use with:  N57C-1CE heavy-duty Coil Nailer  N58C-1-E Coil Nailer  N58C-1-E Coil Nailer  N66C-2-E Coil Nailer

Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.

BT13 Series 18 gauge brown brad nails for use with the Bostitch brad nailer.  Finish nails (brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.

Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments.  28° Collation Angle  Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx. 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out.  (Remember only tools fitted with sequential trip should be used when working up a ladder).  Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them.  Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater.  Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish.  Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.

Nailer & Brad Nails

30mm  
Box 1500  
High Carbon Zinc Dichromate

HCFN-30 15 Gauge Hardened Nails 30MM (Pack 1500)

Type - 15 gauge angled finish nail.Finish - Galvanised.Length - 50mm.QTY - Box 3655.

15 Gauge Angled Galvanised Finish Nails 50MM (Pack 3655)

Gauge/Diameter (mm) 18 GA Length 20 SKU BT1320GA Finish GALV Description MINIBRADS 15 GALVA 5M Qty per box 5000
Note: Image is for illustrative purposes only and may differ from the actual product

BT13-20-Galvanised Brad Nails 20MM (Pack 5000)

Finish: Bright.Size: 2.1 x 40mm.Box quantity: 24,500.
Note: Image is for illustrative purposes only and may differ from the actual product

Bright Ring Shank Coil Nails 2.1 X 40MM (Pack 24,500)

A Bulk Pack of 2,500 38 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers.  Length : 38 mm.Pack : Box of 2500.
Note: Image is for illustrative purposes only and may differ from the actual product

SB16-1.50 Straight Finish Nail 38MM Galvanised (Pack 2500)

Length : 45mm.  
Colour : Brown.  
Pack : Clam pack of 1000.
Note: Image is for illustrative purposes only and may differ from the actual product

BT1345-45 1M Brown Brad Nails 45MM (Pack 1000)

Gauge/Diameter (mm) 3.1   
Length 90   
28° Collation Angle  
SKU S310R90   
Profile RING   
Finish BRIGHT   
Description STICK NAIL 3.10-90 RING 2M   
Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S

Browse our original Bondloc products in Nailer & Brad Nails

We suggest upgrading to Chrome