Brand

Rating

Price

Maximum Voltage Sensed

Minimum Voltage Sensed

Electrical Testing Equipment - Free UK Delivery Over £25 - Buy Online | Zoro

Electrical Testing Equipment

The Wiha eMobility Voltage and Continuity Tester ensures electrical isolation. It is suitable for voltage testing, flow testing and rotational field testing. Also suitable for testing hybrid and electric vehicles as well as photovoltaic systems. The illuminated LED display shows present voltage on an 8-level scale, as well as 'the' actual value. It additionally offers the option of single-pole phase testing, optical rotational field display, as well as automatic polarity recognition. An integrated spacer makes quick one-handed testing possible. Whilst measuring point illumination makes it ideal for work in poorly lit working environments. For additional safety, a low battery charge is indicated directly on the LC display. Complaint with the standards EN 61010-1 and EN 61243-3:2014. Specifications: Min. - Max. Voltage (AC/DC) : 12-1, 000/12-1, 500V. Contamination Level: 2. Protection Class: IP 64. Operating Temperature: -15°C - 40°C. Power: 2 x AAA Batteries (supplied) .

EMobility Voltage and Continuity Tester 12-1, 000 V Ac, Cat IV

This Wiha Voltage Detector is used to detect and locate live electrical cabling and wires, breaks and cable interruptions, blown fuses, defective light bulbs on light chains and single wires. The contactless Wiha voltage tester will give an initial indication of whether an area is live or not thanks to an optical and audible signal. Once the tester is switched on, the permanently green LED indicates the tester is ready for use. During the voltage test, the LEDs will light up blue (weak) , orange, or red (strong) , depending on the strength of the alternating electric field. The device switches off automatically to save energy if it is not used for four minutes. An integrated flashlight allows the user to illuminate the measurement point in dark environments and can be switched off and on manually for use solely as a flashlight. With its push-on clip, the voltage tester snugly fits into any shirt or trouser pocket thanks to its handy size. Suitable for all socket variants worldwide thanks to its measurement tip suited to international usage. Designed for CAT IV 1, 000 VAC, the single-pole voltage tester complies with EN 61010-1/IEC 61326. The voltage tester should be tested on a known voltage source before and after every use to ensure it functions correctly. Specifications: Voltage V AC (min. – max.) : 12-1000V. Protection Class: IP 67. Operating Temperature: -20 - 40°C. Power: 2 x AAA Batteries (supplied) .

Non-contact Voltage Detector 12-1000V Ac

The Wiha Voltage Tester for determining AC voltages in the range up to 250 volts with respect to earth potential. Suitable for trade and industry professionals. Each tool is individually tested at 10, 000 V AC and approved for 1, 000 V AC.

It can be used as a fully-fledged screwdriver.

Overall Length: 140mm.

Range: 110-250V.

255-11L Voltage Tester 110-250V WHA34745

The Wiha Continuity Tester quickly and easily tests electrical connections, components, and equipment for continuity. Thanks to a signal sound and LED display the continuity measurement is easy to read. If the device is not in use for 30 seconds, it automatically switches off to save energy. In addition, the continuity tester from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit working environments. Both in the area of tested current and in various resistance areas, the continuity tester from Wiha offers reliable test results coupled with maximum safety according to CAT II up to 400 V. Conforms to EN 61010-1, IP40, CE CAT II 400V Standards. Specifications: Measurement Ranges: 0 - 500 kΩ and 0 - 10 Ω. Resistance Range 1: 0 to 500 kΩ/Range 2: 0 to 10 Ω. Testing Current Range 1: < 5 µA/Range 2: < 20 mA. Operating Temperature: 0°C - 40°C. Protection Class: IP 40. Power: 2 x AAA Batteries (supplied) .

Continuity Tester 400 V Ac, Cat II

This Wiha Digital Multimeter equips you for a wide variety of measurements. This single tool can be used to make voltage, current, resistance, frequency, capacity, and temperature measurements. In addition, continuity and diode tests are also possible. A large LCD display with background illumination and data hold function makes the measurement results immediately readable. The additional bar graph display ensures the quick and clear recognition of changes. An additional signal sound indicates the current flow during the continuity check. Thanks to the automatic measuring range selection, the manual pre-selection of specific measurement ranges is no longer required. Measurement of TRUE-RMS values facilitates the application of the measurement results. The storage of previous measurement values and their comparison to future measurement results allows various control options. Add to this optimal result finding through the generation of minimum and maximum values. According to the measurement categories CAT III up to 1000 V AC and CAT IV up to 600 V, the digital multimeter from Wiha offers maximum safety for working on building installations and directly on the sources of low-voltage installations. Confroms to EN 61010-1, EN 61010-2-033, EN 61010-031, IP40, CE CAT III 1000V/CAT IV 600V Standards. Specifications: Current (AC/DC) : 10 A/10 A. Min. - Max. Voltage (AC/DC) : 0-1, 000V/0-1, 000V. Resistance: 200 MΩ. Frequency: 60 MHz. Temperature Measurement: -200°C to 1, 350°C. Contamination Level: 2. Protection Class: IP 40. Operating Temperature: 0°C - 50 °C. Capacity: 60 mF. Power: 2 x AAA Batteries (supplied) .

Digital Multimeter 1, 000 V Ac, Cat IV

The Wiha Clamp Meter can be used to carry out measurements without interrupting the electrical circuit. Tests: voltage measurement in the AC and DC range, as well as resistance, frequency, and capacity measurements. They also allow continuity and diode tests. A large LCD display with background illumination and data hold function makes the measurement results immediately readable even beyond the measurement process. An additional signal sound indicates the current flow during the continuity check. Handling is greatly facilitated by the remote single-hand testing. In addition, the measuring caliper from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments. The LPF function, coupled with the True-RMS function increase the process safety of your test by providing interference-free effective values. According to the measurement category CAT IV up to 1, 000 V the measuring caliper offers maximum safety for working directly on the sources of low-voltage installations. Conforms to IP40 CAT IV 1.000 V Standards. Specifications: Current (AC/DC) : 400 A/400 A. Min. - Max. Voltage (AC/DC) : 0-1, 500V/0-1, 500V. Resistance: 40 MΩ. Frequency: 5 MHz. Power: 2 x AAA Batteries (supplied) .

Browse our original Wiha products in Electrical Testing Equipment