Brand

Rating

Price

Special Offers

Product Type

Material

Load Capacity

Colour

Shelf Capacity

Number of Shelves

Overall Width

Overall Depth

Shelf Unit Design

Finish

General Purpose Metal Shelving - Free UK Delivery Over £25 - Buy Online | Zoro

Tyre shelf unit, zinc plated, single sided, 3 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = single sided. Shelf unit height = 2280 mm. Overall width = 1070 mm. Overall depth = 320 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 3 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 12 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: For single shelf units from 4 levels, the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. The included assembly and installation instructions must be observed. Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

Tyre Shelf Unit, Zinc Plated, Single Sided, 3 Levels, Standard Shelf Unit

CLEANA boltless shelving unit, extension shelf unit, shelf width 800 mm, 6 shelves, shelf depth 500 mm, max. shelf load 230 kg. Supplied = flat pack. Temperature resistance = -20 °C to +40 °C. Colour of uprights = pure white RAL 9010. Shelf unit height = 2280 mm. Shelf unit type = extension unit. Finish = coated. Material properties = suitable for use with foodstuffs and condensation-proof. Material = steel. Design = plug in. Shelf height adjustment increments = 30 mm. Overall depth = 520 mm. Overall width = 810 mm. Max. bay load = 2500 kg. Max. shelf load = 230 kg. Shelf colour = pure white RAL 9010. Shelf depth = 500 mm. Shelf width = 800 mm. Number of shelves = 6 pcs. Recommended use = hygienic areas: yes. Product type = hygienic boltless shelving units. Ideal for catering, hotels, laundries, offices and storage areas. With high quality, innovative CLEANA coating which is suitable for foodstuffs - this makes CLEANA shelving units suitable for the storage of foodstuffs and textiles. The suitability of the CLEANA coating for use with foodstuffs has been certified by the German institute for foodstuffs, consumer goods and environmental analysis of Nehring in Braunschweig. CLEANA shelving units are thus a cost effective alternative to stainless steel shelving units. CLEANA shelving units are temperature resistant from -20 °C to +40 °C. The CLEANA coating is condensation-proof, will not blister and does not lose its sheen. Optimum mechanical properties of the CLEANA coating: as it is applied to a hot dip galvanised substrate, it will not rust even if the coating is damaged. All edges are bevelled, therefore no risk of injury. Modular shelf design for easy plug-in assembly. Shelf levels adjustable in 30 mm increments. The CLEANA white powder coating system meets the strict requirements of the German Food and Feed Code (LFGB) for direct contact with foodstuffs (as well as unpacked foods) , as well as article 3 of the Directive (EU) no. 1935/2004 (STJR09-070, 15.07.2010) It is necessary to reinforce every standard shelf unit and every other extension shelf unit with the supplied cross braces. External shelf unit dimensions: Standard shelf unit Shelf width + 50 mm, shelf depth + 20 mm. Extension shelf unit Shelf width + 10 mm, shelf depth + 20 mm. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The specified max. load values are applicable with uniform load distribution. Additional shelves may be used if the specified max. bay load is observed.

CLEANA Boltless Shelving Unit - Extension - Width 800mm, 6 Shelves, Shelf Depth 500mm, Max. Load 230 Kg

CLEANA boltless shelving unit, standard shelf unit, shelf width 800 mm, 6 shelves, shelf depth 600 mm, max. shelf load 260 kg. Supplied = flat pack. Temperature resistance = -20 °C to +40 °C. Colour of uprights = pure white RAL 9010. Shelf unit height = 2280 mm. Shelf unit type = standard unit. Finish = coated. Material properties = suitable for use with foodstuffs and condensation-proof. Material = steel. Design = plug in. Shelf height adjustment increments = 30 mm. Overall depth = 620 mm. Overall width = 850 mm. Max. bay load = 2500 kg. Max. shelf load = 260 kg. Shelf colour = pure white RAL 9010. Shelf depth = 600 mm. Shelf width = 800 mm. Number of shelves = 6 pcs. Recommended use = hygienic areas: yes. Product type = hygienic boltless shelving units. Ideal for catering, hotels, laundries, offices and storage areas. With high quality, innovative CLEANA coating which is suitable for foodstuffs - this makes CLEANA shelving units suitable for the storage of foodstuffs and textiles. The suitability of the CLEANA coating for use with foodstuffs has been certified by the German institute for foodstuffs, consumer goods and environmental analysis of Nehring in Braunschweig. CLEANA shelving units are thus a cost effective alternative to stainless steel shelving units. CLEANA shelving units are temperature resistant from -20 °C to +40 °C. The CLEANA coating is condensation-proof, will not blister and does not lose its sheen. Optimum mechanical properties of the CLEANA coating: as it is applied to a hot dip galvanised substrate, it will not rust even if the coating is damaged. All edges are bevelled, therefore no risk of injury. Modular shelf design for easy plug-in assembly. Shelf levels adjustable in 30 mm increments. The CLEANA white powder coating system meets the strict requirements of the German Food and Feed Code (LFGB) for direct contact with foodstuffs (as well as unpacked foods) , as well as article 3 of the Directive (EU) no. 1935/2004 (STJR09-070, 15.07.2010) It is necessary to reinforce every standard shelf unit and every other extension shelf unit with the supplied cross braces. External shelf unit dimensions: Standard shelf unit Shelf width + 50 mm, shelf depth + 20 mm. Extension shelf unit Shelf width + 10 mm, shelf depth + 20 mm. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The specified max. load values are applicable with uniform load distribution. Additional shelves may be used if the specified max. bay load is observed.

CLEANA Boltless Shelving Unit - Standard - Width 800mm, 6 Shelves, Shelf Depth 600mm, Max. Load 260 Kg

Shelf for CLEANA boltless shelf unit, shelf width 800 mm, depth 500 mm. Supplied = assembled. Width = 800 mm. Depth = 500 mm. Material = steel. Finish = coated. Colour = pure white RAL 9010. Max. load = 230 kg. Product type = accessories for hygienic shelving units.

Shelf For CLEANA Boltless Shelf Unit, Shelf Width 800mm, Depth 500mm

CLEANA boltless shelving unit, extension shelf unit, shelf width 1000 mm, 5 shelves, shelf depth 600 mm, max. shelf load 200 kg. Supplied = flat pack. Temperature resistance = -20 °C to +40 °C. Colour of uprights = pure white RAL 9010. Shelf unit height = 1920 mm. Shelf unit type = extension unit. Finish = coated. Material properties = suitable for use with foodstuffs and condensation-proof. Material = steel. Design = plug in. Shelf height adjustment increments = 30 mm. Overall depth = 620 mm. Overall width = 1010 mm. Max. bay load = 2500 kg. Max. shelf load = 200 kg. Shelf colour = pure white RAL 9010. Shelf depth = 600 mm. Shelf width = 1000 mm. Number of shelves = 5 pcs. Recommended use = hygienic areas: yes. Product type = hygienic boltless shelving units. Ideal for catering, hotels, laundries, offices and storage areas. With high quality, innovative CLEANA coating which is suitable for foodstuffs - this makes CLEANA shelving units suitable for the storage of foodstuffs and textiles. The suitability of the CLEANA coating for use with foodstuffs has been certified by the German institute for foodstuffs, consumer goods and environmental analysis of Nehring in Braunschweig. CLEANA shelving units are thus a cost effective alternative to stainless steel shelving units. CLEANA shelving units are temperature resistant from -20 °C to +40 °C. The CLEANA coating is condensation-proof, will not blister and does not lose its sheen. Optimum mechanical properties of the CLEANA coating: as it is applied to a hot dip galvanised substrate, it will not rust even if the coating is damaged. All edges are bevelled, therefore no risk of injury. Modular shelf design for easy plug-in assembly. Shelf levels adjustable in 30 mm increments. The CLEANA white powder coating system meets the strict requirements of the German Food and Feed Code (LFGB) for direct contact with foodstuffs (as well as unpacked foods) , as well as article 3 of the Directive (EU) no. 1935/2004 (STJR09-070, 15.07.2010) It is necessary to reinforce every standard shelf unit and every other extension shelf unit with the supplied cross braces. External shelf unit dimensions: Standard shelf unit Shelf width + 50 mm, shelf depth + 20 mm. Extension shelf unit Shelf width + 10 mm, shelf depth + 20 mm. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The specified max. load values are applicable with uniform load distribution. Additional shelves may be used if the specified max. bay load is observed.

CLEANA Boltless Shelving Unit - Extension - Width 1000mm, 5 Shelves, Shelf Depth 600mm, Max. Load 200 Kg

CLEANA boltless shelving unit, standard shelf unit, shelf width 800 mm, 5 shelves, shelf depth 1000 mm, max. shelf load 360 kg. Supplied = flat pack. Temperature resistance = -20 °C to +40 °C. Colour of uprights = pure white RAL 9010. Shelf unit height = 1920 mm. Shelf unit type = standard unit. Finish = coated. Material properties = suitable for use with foodstuffs and condensation-proof. Material = steel. Design = plug in. Shelf height adjustment increments = 30 mm. Overall depth = 1020 mm. Overall width = 850 mm. Max. bay load = 2500 kg. Max. shelf load = 360 kg. Shelf colour = pure white RAL 9010. Shelf depth = 1000 mm. Shelf width = 800 mm. Number of shelves = 5 pcs. Recommended use = hygienic areas: yes. Product type = hygienic boltless shelving units. Ideal for catering, hotels, laundries, offices and storage areas. With high quality, innovative CLEANA coating which is suitable for foodstuffs - this makes CLEANA shelving units suitable for the storage of foodstuffs and textiles. The suitability of the CLEANA coating for use with foodstuffs has been certified by the German institute for foodstuffs, consumer goods and environmental analysis of Nehring in Braunschweig. CLEANA shelving units are thus a cost effective alternative to stainless steel shelving units. CLEANA shelving units are temperature resistant from -20 °C to +40 °C. The CLEANA coating is condensation-proof, will not blister and does not lose its sheen. Optimum mechanical properties of the CLEANA coating: as it is applied to a hot dip galvanised substrate, it will not rust even if the coating is damaged. All edges are bevelled, therefore no risk of injury. Modular shelf design for easy plug-in assembly. Shelf levels adjustable in 30 mm increments. The CLEANA white powder coating system meets the strict requirements of the German Food and Feed Code (LFGB) for direct contact with foodstuffs (as well as unpacked foods) , as well as article 3 of the Directive (EU) no. 1935/2004 (STJR09-070, 15.07.2010) It is necessary to reinforce every standard shelf unit and every other extension shelf unit with the supplied cross braces. External shelf unit dimensions: Standard shelf unit Shelf width + 50 mm, shelf depth + 20 mm. Extension shelf unit Shelf width + 10 mm, shelf depth + 20 mm. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The specified max. load values are applicable with uniform load distribution. Additional shelves may be used if the specified max. bay load is observed.

CLEANA Boltless Shelving Unit - Standard - Width 800mm, 5 Shelves, Shelf Depth 1000mm, Max. Load 360 Kg

Additional shelf for boltless archive shelving, depth 600 mm, width 1000 mm. Supplied = assembled. Width = 1000 mm. Depth = 600 mm. Material = steel, zinc plated. Product type = accessories for boltless archive shelving.

Additional Shelf For Boltless Archive Shelving, Depth 600mm, Width 1000mm

Tyre shelf unit, zinc plated, double sided, 7 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = double sided. Shelf unit height = 5100 mm. Overall width = 1030 mm. Overall depth = 1060 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 7 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 56 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Double shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

Tyre Shelf Unit, Zinc Plated, Double Sided, 7 Levels, Extension Shelf Unit

Tyre shelf unit, zinc plated, single sided, 7 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = single sided. Shelf unit height = 5100 mm. Overall width = 1030 mm. Overall depth = 320 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 7 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 28 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: For single shelf units from 4 levels, the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. The included assembly and installation instructions must be observed. Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

Tyre Shelf Unit, Zinc Plated, Single Sided, 7 Levels, Extension Shelf Unit

Tyre shelf unit, zinc plated, double sided, 5 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = double sided. Shelf unit height = 3660 mm. Overall width = 1070 mm. Overall depth = 1060 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 5 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 40 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Double shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

Tyre Shelf Unit, Zinc Plated, Double Sided, 5 Levels, Standard Shelf Unit

Tyre shelf unit, zinc plated, block shelf unit, 5 levels, standard shelf unit. Supplied = flat pack. Shelf unit type = standard unit. Shelf unit design = block shelf unit. Shelf unit height = 3660 mm. Overall width = 1070 mm. Overall depth = 2340 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 5 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 80 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Block shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

Tyre Shelf Unit, Zinc Plated, Block Shelf Unit, 5 Levels, Standard Shelf Unit

Tyre shelf unit, zinc plated, block shelf unit, 3 levels, extension shelf unit. Supplied = flat pack. Shelf unit type = extension unit. Shelf unit design = block shelf unit. Shelf unit height = 2280 mm. Overall width = 1030 mm. Overall depth = 2340 mm. Shelf width = 1020 mm. Shelf depth = 300 mm. Max. load per tyre level = 140 kg. Max. bay load = 1000 kg. Number of levels = 3 pcs. Material = steel. Finish = galvanised. Shelf height adjustment increments = 60 mm. Design = plug in. Tyre width up to = 255 mm. Tyres per shelf bay = 48 pcs. Product type = tyre shelving units. Suitable for car tyres and rims up to 255 mm wide. Uncomplicated assembly. Zinc plated surface. Tyre levels adjustable in 60 mm increments. The specified room height is valid for max. tyre diameter of 685 mm. If the tyre diameter is larger, the required room height is increased accordingly. For single shelf units from 4 levels , the use of wall brackets and floor anchors is required. Wall brackets for solid masonry walls (e.g. concrete, limestone) and floor anchors (for screed and concrete) are included in delivery. Important information Please contact us if the supplied wall brackets and floor anchors are NOT suitable for your walls and/or floors. If the height of the shelf unit equals more than 5 times its depth, it must be secured against tipping with suitable floor or wall fasteners. The included assembly and installation instructions must be observed. External dimensions Standard shelf unit shelf width + 50 mm Extension shelf unit shelf width + 10 mm Please note: Block shelf units must be bolted to the floor using the wall and floor anchoring utensils (suitable for screed and concrete) Also available for the storage of HGV tyres on request. The specified max. load values are applicable with uniform load distribution. Additional shelf levels may be used if the specified max. bay load is observed.

Browse our original SCHOLZ products in General Purpose Metal Shelving