Brand

Rating

Price

Special Offers

Jaw Opening

Pin Diameter

Pin Type

Safe Working Load

Shackle Length

Finish/Colour

Chain Size

Hook Type

Number of Legs

Product Type

Lifting, Pulling & Positioning - Free UK Delivery Over £25 - Buy Online | Zoro

US Federal specification RR-C-271D IV. Self colour.

Notes
• Images are for illustration purposes only, actual product may vary

Suitable for lifting, turning (180°) and vertical transfer of hot rolled structural steel plates and sections up to a surface hardness of 300 Brinell/32 Rockwell C. Fitted with a locking device. Lifting clamps are fitted with special hook-up facilities to enable easy fitting of the clamps in the horizontal position.

US Federal specification RR-C-271D IV. Self-colour.
Safety Anchor Type Illustrated

Double Leg Chain Sling
All general purpose slings should be rated by the uniform load method as stated. BS EN 818-4.
Chain length 2 metres.
Available in following combinations:
Single Leg Chain Sling with Safety Hook.
Single Leg Chain Sling with Grab Shortening Hook.
Single Leg Chain Sling with Self Locking Hook.
Single Leg Chain Sling with Self Locking Hook and Grab Shortening Hook.

A quick and effective means of making a loop or a thimble eye in wire rope. The Grip consists of U bolt, bridge and two hexagonal nuts. The U bolt should be fitted over the non load bearing tail of the loop. The bridge takes the load bearing of the loop.tighten the hex nuts equally,using a spanner or socket

BS 3032 1958. 
With type 'A' pins. Available as self-colour or galvanised.

750 to 3,000kg range capacities, these versatile lever hoists are perfect for pulling, lifting and lashing of loads Closed bearing design reduces user effort and offers easy maintenance. Unique spring clutch system to hold at any desired height. New design drop forged hooks with safer tip and slowly bending performance.
1.5m of chain fitted as standard, other lengths available on request.

MH Series
Heavy duty and compact design to meet all pertinent world standards. Reliable disc brake and premium grade alloy load chain. Drop-forged and expertly heat treated for greater strength and long wearing. Conforms to CE safety standards.

Four Leg Chain Sling
All general purpose slings should be rated by the uniform load method as stated. BS EN 818-4.
Chain length 2 metres.
Available in following combinations:
Single Leg Chain Sling with Safety Hook.
Single Leg Chain Sling with Grab Shortening Hook.
Single Leg Chain Sling with Self Locking Hook.
Single Leg Chain Sling with Self Locking Hook and Grab Shortening Hook.

Light duty hoists with a 250 to 500kg capacity.
These mini lever hoists are ideal for every day light duty applications. It's small, robust and can be used in confined working conditions. Drop forged hooks designed to bend slowly to warn of overload.

Double sealed ball bearings. Built-in bumper guards. Adjustable to fit various sizes of flange and I-beam. Can be used on straight or curved track. Can be installed or removed at any point along the track. 10,000 kg models available on request.

Single Leg Chain Sling
All general purpose slings should be rated by the uniform load method as stated. BS EN 818-4.
Chain length 2 metres.
Available in following combinations:
Single Leg Chain Sling with Safety Hook.
Single Leg Chain Sling with Grab Shortening Hook.
Single Leg Chain Sling with Self Locking Hook.
Single Leg Chain Sling with Self Locking Hook and Grab Shortening Hook.

A safe, simple and very strong steel tube lever bar. Heavy duty and robust design. The extra long length making lifting easier with its increased leverage. Ideal for shifting and positioning packing cases, small machinery etc.

- A heavy-duty, industrial quality, dual purpose hydraulic jack
- Designed for lifting loads with very low minimum clearances (foot) or high clearances (head)
- Ideal for house moving, machinery installation and application at shipyard, bridge building or plant construction sites
- Great companion tool for machinery type rollers. 
- Easy operation in any direction and spring assisted return and over-travel protection on 5 or 10 ton models
- Safety valve for overload protection
- Pump handle included 
- Electrically welded base and cylinders to assure strength
- Works in extreme temperatures
- Capacities from 2,000 to 10,000kg
- Complies with ANSI/ASME B30.1 standards and CE safety standard.

- A compact, well constructed jack that can be used in any position, with the housing revolving 360 degrees
- The lowering speed can be accurately adjusted and the jack is protected against overloading 
- The pump lever is removable
- Capacities from 5,000 to 25,000kg
- US standard USA ASME/ANSI B30.1.198

- Mechanical steel ratchet toe jack with a safety crank with folding handle. 
- Suitable for lifting loads of any type. 
- Lifting either with the fixed toe or on clawed head. 
- All construction components are standardized. 
- Capacities from 1,500 to 10,000kg.
- DIN 7355 (type HVS).

Double sealed ball bearings. Built-in bumper guards. Adjustable to fit various sizes of flange and I-beam. Can be used on straight or curved track. Can be installed or removed at any point along the track. 10,000 and 20,000kg models available on request.

One to five ton range capacities. Clamp jaw designed to reduce flange stress by distributing load away from I-beam flange edge. Easily mounted with threaded handle. Fits a wide range of flange widths and beams.

US Federal specification RR-C-271D IV. Self colour.

02122 Screw Pin Bow Shackle SWL 6.50T comes with Cert

CL05 Vertical Plate Lifting Clamp 500kg Cap + Cert

SCD02 S/Large Dees Hackle SWL 0.50T + Cert

US Federal specification RR-C-271D IV. Self-colour.

02201 Screw Pin Dee Shackle SWL 0.50T comes with Cert

Sling type: double.
Chain size: 7mm.
Load: 0-45° 2.10 tonne. 45-60° 1.50 tonne.

CS072HC 7mm x 2m Double Leg Chain Sling

DIN 1142 
(DIN 741 and stainless steel also available).

25305 Wire Rope Grip

BS 3032 1958. 
With type 'A' pins. Available as self-colour or galvanised.

SCB04 S/Large Bows Hackle SWL 2.00T + Cert

750 to 3,000kg range capacities, these versatile lever hoists are perfect for pulling, lifting and lashing of loads Closed bearing design reduces user effort and offers easy maintenance. Unique spring clutch system to hold at any desired height. New design drop forged hooks with safer tip and slowly bending performance.
1.5m of chain fitted as standard, other lengths available on request.

LW200 Lever Hoist 2.0 Tonne x 1.5M Chain

MH Series
Heavy duty and compact design to meet all pertinent world standards. Reliable disc brake and premium grade alloy load chain. Drop-forged and expertly heat treated for greater strength and long wearing. Conforms to CE safety standards.

MH10/6 Manual Chain Hoist 1.0 Tonne x 6m Chain

Sling type: four leg.
Chain size: 7mm.
Load: 0-45° 3.10 tonne. 45-60° 2.20 tonne.

CS074HC 7mm x 2m Four Leg Chain Sling

Light duty hoists with a 250 to 500kg capacity.
These mini lever hoists are ideal for every day light duty applications. It's small, robust and can be used in confined working conditions.

DB50 Lever Hoist 0.50 Tonne x 1.5M Chain

HMT20 Plain Trolley 2.0T Capacity comes with Certificate

Single Leg Chain Sling
All general purpose slings should be rated by the uniform load method as stated. BS EN 818-4.
Chain length 2 metres.
Available in following combinations:
Single Leg Chain Sling with Safety Hook.
Single Leg Chain Sling with Grab Shortening Hook.
Single Leg Chain Sling with Self Locking Hook.
Single Leg Chain Sling with Self Locking Hook and Grab Shortening Hook.

CS071SCHC 7mm x 2m Single Leg Chain Sling & Grab

RC15 1.5 Tonne Roller Crowbar x 2m Long

A heavy-duty, industrial quality, dual purpose hydraulic jack. Designed for lifting loads with very low minimum clearances (foot) or high clearances (head). Ideal for house moving, machinery installation and application at shipyard, bridge building or plant construction sites. Great companion tool for machinery type rollers. Easy operation in any direction and spring assisted return and over-travel protection on 5 or 10 ton models. Safety valve for overload protection. Pump handle included. Electrically welded base and cylinders to assure strength. Works in extreme temperatures.
Capacities from 2,000 to 10,000kg.
	
Complies with ANSI/ASME B30.1 standards and CE safety standard.

TL5 Hydraulic Industrial Toe Jack 5000kg

A compact, well constructed jack that can be used in any position, with the housing revolving 360 degrees. The lowering speed can be accurately adjusted and the jack is protected against overloading. The pump lever is removable.
Capacities from 5,000 to 25,000kg.

US standard USA ASME/ANSI B30.1.198

HM50 HM Hydraulic Rotational Toe Jack 5000kg

Mechanical steel ratchet toe jack with a safety crank with folding handle. Suitable for lifting loads of any type. Lifting either with the fixed toe or on clawed head. All construction components are standardized. 
Capacities from 1,500 to 10,000kg.

DIN 7355 (type HVS).

Browse our original Ttc Lifting_Gear products in Lifting, Pulling & Positioning

We suggest upgrading to Chrome