Brand

Rating

Price

Special Offers

Tools & Machining - Free UK Delivery Over £25 - Buy Online | Zoro

Suitable as a removal aid for MacPherson spring struts, for rear axle springs and for broken springs.Enables the removal of the spring strut from the clamping bore in the axle casing without additional removal of various axle components or without lowering the sub-frame (support frame).Non-slip as each spindle has a right- and left-hand thread.Saves considerable time and money, as there is no need for a complicated wheel alignment.Technical data	Max. load: 800 kg/8.000 N	Clamping width: Ø100 - 300 mm	Clamping range: short spindle 90 - 180 mm, long spindle 110 - 315 mmApplicationE.g.: VAG Golf IV, V, VI, Touran, Passat, Audi A3, TT, Skoda Oktavia, Seat Leon etc.

Mechanical Coil Spring Compressor

For driving out components and straightening jobs on bodywork with extra tough heavy-duty design and practical handles	8 tonne (approx.) maximum force	Loosens even the tightest connections; pressed or rusted in / attached with a cone	Suitable for removing injectors, wheel hubs, supporting joints etc. with relevant accessoriesSpecifications:	Weight: 9kg	Length: 770mm	Connection Thread: M18 x 1.5

GO520 Slide Hammer - 9kg

For use with 08585000, GO520 & GO530	Universal slide hammer use when paired with GO522 M18 x 1.5 adaptor	Compatible with 10mm steel chains	Special hook design provides reliable fitting	High-quality hardened and tempered steel construction	Includes mounting bolts

Single Hook for Slide Hammer

For use with 08585000, GO520 & GO530	Universal slide hammer use when paired with GO522 M18x 1.5 adaptor	Special hook design provides reliable fitting	High-quality hardened and tempered steel construction	Universal adaptation on each chain end, independent of manufacturing and for tension brackets with notch cone/ conical collar	No twisting of chain during turning and rehanging	Includes mounting bolts

Double Hook for Slide Hammer

Allows for the assembly/disassembly of the brake caliper fixing screws when working on the braking system.
Used mainly on the front and rear axles of heavy vehicles.
Even the most stubborn screws are released with the blow of a hammer on the end of the wrench.
All wrenches are equipped with a 3/4" square drive that also allows clamping, in combination with a torque wrench, according to the manufacturer's instructions.
Warning: pay attention to the torque conversion formula marked on the wrench by means of a laser (necessary because of the lever's extension due to the type of construction) .
It is no longer necessary to remove the lever of the steering control tie rod.
 

Application:

MAN TGA, TGS, TGX/MB, Atego from 12 ton, Actros
Technical data:

Length: 215mm
Torx profile

GO1313 Slogging Brake Caliper Wrench E24 Man TGA TGS Tgx

Allows for the assembly/disassembly of the brake caliper fixing screws when working on the braking system.
Used mainly on the front and rear axles of heavy vehicles.
Even the most stubborn screws are released with the blow of a hammer on the end of the wrench.
All wrenches are equipped with a 3/4" square drive that also allows clamping, in combination with a torque wrench, according to the manufacturer's instructions.
Warning: pay attention to the torque conversion formula marked on the wrench by means of a laser (necessary because of the lever's extension due to the type of construction) .
It is no longer necessary to remove the lever of the steering control tie rod.

GO1311 Slogging Brake Caliper Wrench E18 Man TGl TG

Emulation/acquisition wiring, with the function of PWM power generator such as PWM POWER with an integrated 5V voltage generator; mass generator and feedback control. It is used for the activation of the components controlled in feedback through potentiometers.

GO2109 PWM Power Plus (5 Pin)

Tool for removing ball joints.
Universal tool for removing tie rod head as well as supporting joints.
The trapezoidal thread spindle is hardened and tempered as well as provided with a ball-bearing pressure piece.
Impact wrenches can be used with the ball joint puller to complete the task more quickly. The most resistant conical seat connections can be released without any effort.

Application: 

Mercedes trucks e.g. DB 1424 and DB Actros 2.

GO382 Ball Joint Puller Vibro Impact 39mm

Allows for the assembly/disassembly of the brake caliper fixing screws when working on the braking system.
Used mainly on the front and rear axles of heavy vehicles.
Even the most stubborn screws are released with the blow of a hammer on the end of the wrench.
All wrenches are equipped with a 3/4" square drive that also allows clamping, in combination with a torque wrench, according to the manufacturer's instructions.
Warning: pay attention to the torque conversion formula marked on the wrench by means of a laser (necessary because of the lever's extension due to the type of construction) .
It is no longer necessary to remove the lever of the steering control tie rod.
 

Application:

MB Atego/Actros, SAF
Technical data:

Length: 219mm
Bi-hex profile

GO1314 Slogging Brake Caliper Wrench M24 Saf

Allows for the assembly/disassembly of the brake caliper fixing screws when working on the braking system.
Used mainly on the front and rear axles of heavy vehicles.
Even the most stubborn screws are released with the blow of a hammer on the end of the wrench.
All wrenches are equipped with a 3/4" square drive that also allows clamping, in combination with a torque wrench, according to the manufacturer's instructions.
Warning: pay attention to the torque conversion formula marked on the wrench by means of a laser (necessary because of the lever's extension due to the type of construction) .
It is no longer necessary to remove the lever of the steering control tie rod.
 

Application:

MAN TGL
Technical data:

Length: 219mm
Hex profile

GO1316 Slogging Brake Caliper Wrench M22

Required to remove the wiper arm from the wiper arm shaft.

The special design with an adjustable fork width (spring mechanism) and narrow fork ensures high model coverage and good access even in confined spaces.

Puller spindle with movable pressure head, meaning no damage to the wiper arm shaft.

GO1127 Locking Wiper Puller with Hammerhead

Allows for the assembly/disassembly of the brake caliper fixing screws when working on the braking system.
Used mainly on the front and rear axles of heavy vehicles.
Even the most stubborn screws are released with the blow of a hammer on the end of the wrench.
All wrenches are equipped with a 3/4" square drive that also allows clamping, in combination with a torque wrench, according to the manufacturer's instructions.
Warning: pay attention to the torque conversion formula marked on the wrench by means of a laser (necessary because of the lever's extension due to the type of construction) .
It is no longer necessary to remove the lever of the steering control tie rod.
 

Application:

DAF XF95/XF105/XF106/XF
Technical data:

Length: 219mm
Bi-hex Profile

GO1315 Slogging Brake Caliper Wrench M26 DAF XF95/XF105/XF

Allows for the assembly/disassembly of the brake caliper fixing screws when working on the braking system.
Used mainly on the front and rear axles of heavy vehicles.
Even the most stubborn screws are released with the blow of a hammer on the end of the wrench.
All wrenches are equipped with a 3/4" square drive that also allows clamping, in combination with a torque wrench, according to the manufacturer's instructions.
Warning: pay attention to the torque conversion formula marked on the wrench by means of a laser (necessary because of the lever's extension due to the type of construction) .
It is no longer necessary to remove the lever of the steering control tie rod.
 

Application:

MAN, TGM, TGL/MAN Atego up to 9 Ton
Technical data:

Length: 215mm
Torx profile

Browse our original Govoni products in Tools & Machining

We suggest upgrading to Chrome