Brand

Rating

Price

Special Offers

Overall Length

Length

Cutting Pliers - Free UK Delivery Over £25 - Buy Online | Zoro

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.

These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications.

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved. Length (A) 108mm (4.25 in). Blade length (B) 8mm (0.31 in). Head width (C) 10.5mm (0.41 in). Head depth (G) 15mm (0.59 in). Cutting capacity 0.35-1.25mm. Head type Double angled. Cutting edge Flush. Angled heads, also known as oblique style, are set at an angle to the main body of the cutter. This means that the cutter can reach between parts and areas which are difficult to access. The Flush Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are & lsquopinched&rsquo, allowing less altitude and a smaller overall surface area & ndash more than Micro-bevel cuts. The cutters have fine cutting edges that leave a narrow and short taper and small exposed area. They can be used to meet tight specifications for a flush result to a board, component or part.

Supreme Oblique Cutting Flush Cut Double Angled Head Nipper 108mm LIN7291

These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency.  The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved.  Ideal for wire harness work, and standard printed circuit board assembly.  Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications. Length (A): 110 mm (4.3/8 in).  Blade length (B): 10mm (0.39 in).  Head width (C): 10mm (0.39 in).  Head depth (D): 6mm (0.24 in).  Tip width: (F): 0.8mm (0.03 in). Cutting Capacity: 0.1-1.0mm.  Cutting edge: Ultra flush.  The Ultra flush cutter virtually eliminates the pinch that other cutters make. The cutters configure two flat planes, with a barely discernible line separating each of these planar surfaces. They are perfect for use in close tolerance electronic and medical device assembly, where concerns about final lead-end configuration and mechanical shock transmission are a top priority.

Diagonal Cutting Ultra Flush Cut Nipper 110mm

These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled machine grinding guarantees edge and angle accuracy and contact, which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work, and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability, can withstand and distribute the impact of cutting and is utilised in a myriad of applications. Length (A) 112mm (4.1/2in). Blade length (B) 12.5mm (0.5 in). Head width (C) 12.5mm (0.5 in). Head depth (D) 6.0mm (0.24 in). Tip width (F) 1.2mm (0.05 in). Cutting capacity 0.3-1.6mm. Cutting edge Micro-bevel. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are & lsquopinched&rsquo, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.

Diagonal Cutting Micro Bevel Cut Nipper 112.5mm LIN8150

Scheduled_Orders

show_with_global

SearchPage-Enable-Sort-Attribute-Value

AttributeValueSortOnSearchAndCategory

ProductPage-Add-To-Quotation

show

ProductPage-AddToBasket-Mobile

hide

New_Login_Registration_Toggle

InfoPage-DiscountCodes

experiment_1

Previously-Purchased-Tag

Show

Recommendations

test

Number-Of-Recommendations

eight

Header-MainMenu

SearchPage-FilterPanel-Expanded

ProductPage_Bundle

three_products

ProductPage-Attribute-Selector

VariantThreeDropDown

FamilyPage-Attribute-Selector

Discount-PromoLabel

SearchPage-LeadTimeFilter

MyaccountPage_Recommendations

SearchPage-SearchResultLimit

Hundred

Personalised-BoostType

personalised_boost_v1

ProductPage-ViewAll-Terminal-Node

ProductPage-Title-Length-Mobile

StickyFilterPanel-InfiniteScroll

SingleLine-ProductHeader-Mobile

SHOW

SearchPage-BoostType

boost_img_lt_atb

ProductPage-Title-Mobile

Below

Vertical-Recommendations_Toggle

ProductPage-Pills-Visibility

Expanded

Sticky-MainMenu

Payment-GooglePay

SearchPage-InfiniteScroll-Limit

Thousand

SearchPage_Top_Category

Default

search-templates

defaultTemplate

Browse our original Lindstrom products in Cutting Pliers

We suggest upgrading to Chrome