Brand

Rating

Price

Product Type

Finishing Tools - Free UK Delivery Over £25 - Buy Online | Zoro

Hardened & ground guideways. Spindle is supported by adjustable precision taper roller bearings. Manufactured to DIN 8606 tool makers precision. Sealed Gearbox. Machine Light. Guaranteed concentricity of spindle nose better than 0.015 mm. DC 24 Volt electric panel. Removable gap bed. Coolant system. Toolpost guard. Footbrake. Emergency foot brake. Chucks & Chuck Guards. Constant lubrication to headstock gears. User friendly DR0 8 digits display, sealed & dazzle free.

TH4210 Heavy Duty Precision Lathe

Hardened and ground guideways. Spindle is supported by adjustable precision taper roller bearings. Manufactured to DIN 8606 tool makers precision. Guaranteed concentricity of spindle nose better than 0.009 mm. DC 24 Volt electric panel. Chuck Guard. Toolpost Guard.

TU2506 L/D Small Precision Lathe

TH3309D Medium Duty Precision Lathe 3PH

Precise processing
Cast iron gray prism bed, aged for at least six months, inductively hardened and precision ground
Hardened and ground Z-axis guideway
Guaranteed concentricity of the spindle nose better than 0.009 mm
Rolled trapezoid spindles
Leadscrew stored in two sintered bearings
All guides can be adjusted by wedge strips
Precisely crafted sled
Handwheels with adjustable fine scale 0.04 / 0.01 mm
Quadruple tool holder
Concentricity - chuck better than 0.05 mm
Lead screw for thread cutting or automatic longitudinal turning
Right / left rotation in the control panel switchable
Tailstock for taper turning ± 5 mm adjustable
Tailstock quill and handwheel with adjustable fine scale 0.02 mm
Fast, easy and tool-free adjustment by means of a clamping lever
Emergency stop impact switch
Lathe chuck protection
thrust bearing
Change gear set for threading
Extensive accessories
3-jaw lathe chuck in the standard scope of delivery
Stable value
Note: Image is for illustrative purposes only and may differ from the actual product
Note: Image is for illustrative purposes only and may differ from the actual product

TU 2304 Manual Lathe

Precisely manufactured
Powerful, maintenance-free engine
Hardened and ground Z-axis guideway
Guaranteed concentricity of the spindle nose ≤ 0.009 mm
Concentricity on the lathe chuck ≤ 0.04 mm
Lead screw for thread cutting or automatic longitudinal turning
Leadscrew stored in two sintered bearings
All guides can be adjusted by wedge strips
Right / left rotation in the control panel switchable
Rolled trapezoid spindles
Thrust bearing
Tapered roller bearings in P5 quality
Hardened main spindle mounted in adjustable precision tapered roller bearings
Hardened spindle nose with Ø 26 mm spindle bore
Handwheels on the carriage with adjustable fine scale 0.04 / 0.01 mm
Upper slide on cross slide slidable
Chip protection on the upper slide
Heavily ribbed prism bed made of gray cast iron, inductively hardened and precision ground
Tailstock for taper turning ± 5 mm adjustable
Tailstock quill and handwheel with adjustable fine scale 0.02 mm
Quick, easy and tool-free adjustment of the tailstock by a clamping lever
Emergency stop impact switch
Quadruple tool holder
3-jaw lathe chuck in the standard scope of delivery
Change gear set in the standard scope of delivery for thread cutting
Fully equipped, allowing the user to be productive immediately after commissioning
TU 2506VB: Speed change easily adjustable via potentiometer

Optiturn TU 2506VB Lathe

Precise processing
Heavily ribbed prism bed made of cast steel, inductively hardened and precision ground
Hardened and ground Z-axis guideway
Hardened spindle nose (DIN 6350)
Guaranteed concentricity of the spindle nose better than 0.009 mm
Automatic longitudinal / lead screw drive
Roll-rolled trapezoidal thread of the lead screw
Leadscrew stored in two sintered bearings
Longitudinal, top and top slides
Right / left rotation in the control panel switchable
Hardened main spindle mounted in adjustable precision tapered roller bearings
Tapered roller bearings in P5 quality
Cylindrical center mount
Hardened spindle nose with Ø 21 mm spindle bore
Chuck concentricity better than 0.04 mm
Tailstock adjustable for bow turning
Tailstock quill and handwheel with adjustable fine scale 0.02 mm
Fast, easy and tool-free adjustment by means of a clamping lever
Emergency stop impact switch
Lathe chuck protection
thrust bearing
Change gear
Quadruple steel holder, rotatable
Replacement gear set in the standard scope of delivery enables large thread cutting area
3-jaw lathe chuck in the standard scope of delivery
EMC filter class C1

Browse our original Optimum products in Finishing Tools