Brand

Rating

Price

Special Offers

Size

Type

Size Range

Maximum Size

The Rotabroach Raptor Cutters have a unique and exclusive geometry. They are designed to ensure that they will last longer, cut faster and give a better and more accurate finished hole than any other annular cutter. The cutters are manufactured from HSS with the addition of aluminium (M2AL), and heat-treated to a high temperature to ensure excellent hardness.

The Halls M2 Powerbor Cutters allow holes to be produced quickly and more efficiently than conventional drills. Due to the cutter design, the load per tooth is greatly reduced and power used by the machine is kept to a minimum. The cutters are suitable for use on steel, and produce a solid slug which is ejected when the cutter breaks through and the hole is complete. This helps to reduce problems experienced by the swarf and chips that are generated by conventional drilling. Each diameter has a maximum cutting depth of 25mm.

Pilot drill for Rotabroach Raptor Cutters with 25mm cutting depth. Suits Sizes & Oslash13-52mm.

Short Pilot for Rotabroach Raptor Cutters HLLSRA25

The Halls High-Speed Steel Deburring Smooth Cutter, ideal for deburring and chamfering pre-drilled holes in a wide range of materials. Optimum performance is obtained on aluminium and other soft alloys. Shank 1/4in Hexagon. Diameter of cut 5 -13mm (13/64 - 33/64 in)

XD513 High-Speed Steel Deburring Cutter 5 - 13mm HLLXD513

The Rotabroach Raptor Cutters have a unique and exclusive geometry. They are designed to ensure that they will last longer, cut faster and give a better and more accurate finished hole than any other annular cutter. The cutters are manufactured from HSS with the addition of aluminium (M2AL), and heat-treated to a high temperature to ensure excellent hardness. This Rotabroach HSS Raptor Cutter has the following specification Diameter 22mm Cutting Depth 25mm

Rotabroach HSS Raptor Cutter 22 x 25mm HLLRAP220

The Halls High Speed Steel Countersink with 1/4in hexagon shank, 3 flute 90 included angle. Designed for use with power tools and for use on metal. Size. 8.3mm. Angle. 90 .

High Speed Steel Countersink 8.3mm - Metal HLLXCM08

The Halls High-Speed Steel Step Drill for drilling holes in ferrous and non-ferrous materials up to 5mm thick. Size Range. 9,11,13,15,17,19 21mm. Shank. 1/4 Hexagon.

XS921 High-Speed Steel Step Drill 9-21mm HLLXS921

The Halls M2 Powerbor Cutters allow holes to be produced quickly and more efficiently than conventional drills. Due to the cutter design, the load per tooth is greatly reduced and power used by the machine is kept to a minimum. The cutters are suitable for use on steel, and produce a solid slug which is ejected when the cutter breaks through and the hole is complete. This helps to reduce problems experienced by the swarf and chips that are generated by conventional drilling. Each diameter has a maximum cutting depth of 25mm. Diameter 45 mm.

M2 Powerbor Short Cutter 45mm HLL20AAM45

The Halls M2 Powerbor Cutters allow holes to be produced quickly and more efficiently than conventional drills. Each diameter has a maximum cutting depth of 50mm. Diameter 38 mm.

M2 Powerbor Long Cutter 38mm HLL20ABM38

20ZASR Pilot Drill for Powerbor Cutters HLL20ZASR

The Halls Bradradreg; Tool has the following specification:  Drill Sizes: 6, 9, 12, 15, 18, 21, 24, 27, 30, 33 amp; 36mm.Shank: 3/8in (10mm).

BSM2 Bradrad Tool 6-36mm with 10mm Shank

The Rotabroach Commando 35 delivers excellent value, with its powerful 1,050W motor. Fitted with thermal overload protection, it's a perfect machine for both on-site and workshop drilling. Specification Input Power 1,050W Hole Cutting Capacity & Oslash35 x 50mm deep 1 x Rotabroach Commando 35 Magnetic Drill 110V version.

Rotabroach Commando 35 Magnetic Drill 35 x 50mm 110V HLLCOM351

The Rotabroach Commando 40 has a powerful motor with the flexibility of 6-speeds. It is ideal for countersinking and using twist drills. Supplied with a chuck as standard. Specification Input Power 1,100W No Load Speed 270-610/min. Magnetic Adhesion 8,000N Chuck Capacity 13mm Hole Cutting Capacity & Oslash40mm x 50mm deep Weight 14.2kg 1 x Rotabroach Commando 40 Magnetic Drill 110V version.

Rotabroach Commando 40 Magnetic Drill 40 x 50mm 6-Speed 110V HLLCOM401

The G & J Hall CONECUT is a versatile hole-cutting tool for rapid drilling and enlarging holes in thin materials up to 2mm thick. Designed for industrial applications, the diameter of the hole increases as the CONECUT is advanced into the material, providing infinitely variable sizes For use in sheet steel, non-ferrous metals, plastics, Formica and plywood The conical shape of the tool enables any size of hole to be drilled between the bottom and the top of the taper. When drilling metals always use a coolant. Conecut applications Electrical Heating Ventilation Plumbing Shop fitting installations etc. Auto body repair Control panels Sheet metalwork etc. Maintece The Halls CC O CONECUT High Speed Steel Sheet & Tube Drill Bit has the following specification Size Range 37 - 52mm. Chuck 1/2in/13mm. Pilot Hole Required.

CC 4 CONECUT High Speed Steel Sheet & Tube Drill 37-52mm HLL4

The Rotabroach Raptor Cutters have a unique and exclusive geometry. They are designed to ensure that they will last longer, cut faster and give a better and more accurate finished hole than any other annular cutter. The cutters are manufactured from HSS with the addition of aluminium (M2AL), and heat-treated to a high temperature to ensure excellent hardness. This Rotabroach HSS Raptor Cutter has the following specification Diameter 40mm Cutting Depth 25mm

Rotabroach HSS Raptor Cutter 40 x 25mm HLLRAP400

High Speed Steel Countersink 12.4MM - Metal

Size range up to and including number 10 woodscrews.

High Speed Steel Countersink - Wood (Up to NO.10)

The Halls High-Speed Steel Deburring Smooth Cutter, ideal for deburring and chamfering pre-drilled holes in a wide range of materials. Optimum performance is obtained on aluminium and other soft alloys. Shank 1/4in Hexagon. Diameter of cut 7 - 20mm (9/32 - 3/4 in).

XD720 High-Speed Steel Deburring Cutter 7 - 20mm HLLXD720

Size Range. 8,10,12,14,16,18,20mm.Shank. 1/4 Hexagon.

XS820 High-speed Steel Step Drill 8-20MM

The Halls M2 Powerbor Cutters allow holes to be produced quickly and more efficiently than conventional drills. Due to the cutter design, the load per tooth is greatly reduced and power used by the machine is kept to a minimum. The cutters are suitable for use on steel, and produce a solid slug which is ejected when the cutter breaks through and the hole is complete. This helps to reduce problems experienced by the swarf and chips that are generated by conventional drilling. Each diameter has a maximum cutting depth of 25mm. Diameter 25 mm.

M2 Powerbor Short Cutter 25mm HLL20AAM25

This high speed taper drill has two-flute cutting edges which drill and enlarge the holes in ferrous and non-ferrous metals up to 2mm thick. A 1/4 in hexagonal shank enables use in both power drills or screwdrivers. Size Range 3-14mm.

Our Official Halls Product Range

We suggest upgrading to Chrome