Brand

Rating

Price

Special Offers

Material

For Use With

Nozzle Type

Overall Length

Temperature Range

Type

Nozzle Size

Thread Size

Series

Tools & Machining - Free UK Delivery Over £25 - Buy Online | Zoro

TK-1 - Perpendicular tube cutting with reduced force and safety lock. Used for nylon, soft nylon, polyurethane and other soft plastic tubing.
Size (L x W): 155 x 88mm.

KJS Series
The hexagon socket in the body is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space. 

Push-Fit Fittings
Quick and simple tube insertion. Tapered threads have a re-usable thread seal.
Pressure range: 0.9bar min to +10bar max.
Temp range: -20°C min to +70°C max.
Tube suitability: nylon, polyurethane.

Operating pressure: 0 to 1.0 MPa.
Proof pressure: 1.5 MPa.
Weight: 180g.
Operational force**: 7 N.
** When valve is fully open.

• Energy saving.
• Shock resistant body.
• Gun body made from high impact, shock resistant resin.
• Not affected by supply presure.
• Trigger mechanism gripping force the same at high and low pressure.
• Resin body lever type.

* High efficiency nozzle

Series KNS
Achieving lower noise by dividing the air blow slit

Series KNL: Secures more power even at a greater
distance from a workpiece.

Please note: when a copper extension nozzle is ordered separately, a self align fitting H06-02 will also be required for connection with the blow gun.

Series KNH
Air blow thrust has been increased by 10%.

KN-R02-250 Nozzle Male Size 2.5-R1/4

TK-3 - Low cost plastic pneumatic tube cutter with safety lock. Cuts through nylon, soft nylon, polyurethane and other soft plastic tubings.
Size (L x H): 110 x 43mm.

TK-3 Tube Cutter

SMC Nylon Tubing.
Nylon tubing for use within a comprehensive range of applications.
Suitable for air and water.
Available in various colours and diameters.
Push-in System - Nylon Tube.
All coils shown are non anti-static.

Hose Inside Diameter: 4mm
Hose Outside Diameter: 6mm
Colour: Blue
Material: Nylon 12
Application: General Pneumatic Tubing
Length: 20m
Maximum Operating Pressure: 1.5 MPa @ 20 °C
Manufacturer Series: T
Minimum Operating Temperature: -20 °C, 0 (Water) °C
Maximum Operating Temperature: +40 (Water) °C, +60 °C

T0604BU-20 20M Nylon Blue Tubing

KJS Series
The hexagon socket in the body is used to tighten the socket head male connector with a hexagon wrench. Useful in a confined space. 

Push-Fit Fittings
Quick and simple tube insertion. Tapered threads have a re-usable thread seal.
Pressure range: 0.9bar min to +10bar max.
Temp range: -20°C min to +70°C max.
Tube suitability: nylon, polyurethane.

KQ2S06-M5N One Touch Fitting

Operating pressure: 0 to 1.0 MPa.
Proof pressure: 1.5 MPa.
Weight: 180g.
Operational force**: 7 N.
** When valve is fully open.

• Energy saving.
• Shock resistant body.
• Gun body made from high impact, shock resistant resin.
• Not affected by supply presure.
• Trigger mechanism gripping force the same at high and low pressure.
• Resin body lever type.

* High efficiency nozzle

VMG11BU-F02-04 Blow Gun Blue 1/4 2.5mm Nozzle

KNS-R02-100-4 Low Noise Nozzle Male R1/4 1 x 4

Series KNL

Please note: when a copper extension nozzle is ordered separately, a self align fitting will also be required for connection with the blow gun. Please see the table below.

KNL6-06-200 Extension Nozzle 2 x 600mm

VMG11BU-F02 Blow Gun Blue 1/4 - No Nozzle

Pneumatic Tubing - TU0805C-2M Pack of 1

With the release of the KN series nozzles and gauge heads 30~90% of air consumption required for the current nozzle operation can be saved with the appropriate selection of the new nozzle and sizing. Many variations of nozzle are available with tube materials including nylon, soft nylon, soft copper pipe and OST tubing. Sizes range from 4mm-20mm.KN, With Male Thread/Swinging Nozzle

Nozzle DIA 2.5mm SMC VMG11WF02

Series KNH
Air blow thrust has been increased by 10%.

KNH-R02-100 Nozzle High Efficiency 1-R1/4

The RRI-21930 blow gun weighs 0.25 kg, and has a hose diameter of 6.5 mm. It is capable of maximum air pressure up to 6.3 bar, and air consumption of 5 l/s.

Industrial Blow Gun - VMG11WF02

Provides accurate lubrication of downstream equipment.  The AL bowl (size 30 and 40) is covered with a transparent bowl guard, allowing 360 monitoring. The oil drop rate is adjustable depending on equipment requirements. The AL modular design allows connection with other SMC air preparation equipment.

AL60-F10 1" Lubricator

• Selective removal of electrostatic charge in the fraction of a second
• High frequency AC type
• No external high voltage supply
• Controller and power supply built into housing
• Compact design - only 16mm wide
• Contamination sensor on the nozzle needle is standard
All come with 3 metres of connection cable.

IZN10-01P06 Ionizer with Energy Saving Nozzle

IZN10-02P06 Ioniser comes with Nozzle for Hiigh Flow Rate

Scheduled_Orders

show_with_global

SearchPage-Enable-Sort-Attribute-Value

AttributeValueSortOnSearchAndCategory

ProductPage-Add-To-Quotation

show

ProductPage-AddToBasket-Mobile

hide

New_Login_Registration_Toggle

InfoPage-DiscountCodes

experiment_2

Previously-Purchased-Tag

Show

Recommendations

control

Number-Of-Recommendations

eight

Header-MainMenu

SearchPage-FilterPanel-Expanded

ProductPage_Bundle

two_products

ProductPage-Attribute-Selector

VariantThreeDropDown

FamilyPage-Attribute-Selector

Discount-PromoLabel

CheckoutPage-BeforeYouGo

SearchPage-LeadTimeFilter

SearchPage-SearchResultLimit

Hundred

Personalised-BoostType

personalised_boost_v1

ProductPage-ViewAll-Terminal-Node

ProductPage-Title-Length-Mobile

StickyFilterPanel-InfiniteScroll

SingleLine-ProductHeader-Mobile

SHOW

SearchPage-BoostType

boost_img_lt_atb_gp

ProductPage-Title-Mobile

Below

Vertical-Recommendations_Toggle

ProductPage-Pills-Visibility

Expanded

Sticky-MainMenu

Payment-GooglePay

SearchPage-InfiniteScroll-Limit

Thousand

SearchPage_Top_Category

7-20

search-templates

defaultTemplate

Browse our original SMC products in Tools & Machining

We suggest upgrading to Chrome