Brand

Rating

Price

Special Offers

Overall Length

Length

Product Type

Width

Teeth per Inch

Type

Blade Width

Cutting and Shaping Tools - Free UK Delivery Over £25 - Buy Online | Zoro

The Footprint Grooved Plugging Chisel is used to remove the mortar and cement from between brick and block work. Made from a single, fully forged piece of carbon steel that has been harden and tempered for increased strength and durability.  The cutting edge is wider than the blade with a centre groove for rapid debris removal. The domed head design prevents splintering from continued striking with a hammer.  Made in Sheffield, Britain.  Blade Width: 16mm.Chisel Length: 265mm.

The Footprint Tenon Saw is traditionally used for cutting tenon joints and other detailed sawing requirements. Made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut.  A heavy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made from an attractive two tone lacquered beechwood. It is of a traditional design providing superb comfort and strength adding to the feel and balance of the saw. Three brass screws securely fit the handle to the saw blade.  Made in Sheffield, England.

For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.  Manufactured to British standard.

This Footprint Cold Chisel is ideal for use on stone, masonry, brickwork and other similar materials. It has a heavy-duty design and is made from a fully drop-forged single piece of carbon steel. The cutting edge is hardened and ground for a longer life and the domed anti-mushroom head prevents splintering.  Made in Sheffield, Britain.

590
Manufactured from forged carbon steel. With domed anti-mushroom head for added safety and longer tool life.  Manufactured to BS 3066.

1237
Carbon steel, one piece drop forging means this is one tough chisel. Protective grip, anti-mushroom head, and strengthened neck make this brick bolster virtually indestructable.

The Footprint Tenon Saw is traditionally used for cutting tenon joints and other detailed sawing requirements. Made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut. A heavy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made from an attractive two tone lacquered beechwood. It is of a traditional design providing superb comfort and strength adding to the feel and balance of the saw. Three brass screws securely fit the handle to the saw blade. Made in Sheffield, England. Footprint 256 Brass Back Tenon Saw has the following specification Length 350mm (14in). Teeth 13 tpi.

256 Brass Back Tenon Saw 350mm (14in) 13 TPI FOO25614

The Footprint Grooved Plugging Chisel is used to remove the mortar and cement from between brick and block work. Made from a single, fully forged piece of carbon steel that has been harden and tempered for increased strength and durability. The cutting edge is wider than the blade with a centre groove for rapid debris removal. The domed head design prevents splintering from continued striking with a hammer. Made in Sheffield, Britain. Blade Width 16mm. Chisel Length 265mm. 1 x Footprint 1860 Grooved Plugging Chisel

1860 Grooved Plugging Chisel FOO1860

The Footprint Tenon Saw is traditionally used for cutting tenon joints and other detailed sawing requirements. Made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut.  A heavy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made from an attractive two tone lacquered beechwood. It is of a traditional design providing superb comfort and strength adding to the feel and balance of the saw. Three brass screws securely fit the handle to the saw blade.  Made in Sheffield, England. Footprint 256 Brass Back Tenon Saw has the following specification:  Length: 350mm (14in). Teeth: 13 tpi.

256 Brass Back Tenon Saw 350mm (14in) 13 TPI

578 Scutch Comb Holder 38mm (1.1/2in)

This Footprint Cold Chisel is ideal for use on stone, masonry, brickwork and other similar materials. It has a heavy-duty design and is made from a fully drop-forged single piece of carbon steel. The cutting edge is hardened and ground for a longer life and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain. 1 x Footprint 590 Cold Chisel 300 x 25mm

590 Cold Chisel 300 x 25mm FOO590121

The Footprint 246 Dovetail Saw is made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut. A heavy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made from a attractive two tone lacquered beechwood. It is of a traditional design providing superb comfort and strength adding to the feel and balance of the saw. Three brass screws securely fit the handle to the saw blade. Made in Sheffield, England. Blade Length 200mm (8in). Teeth 20 tpi.

246 Dovetail Saw 200mm (8in) 20 TPI FOO246

This Footprint Flooring Chisel is a traditional tool for lifting floor boards, chasing plaster etc. The chisel is made from carbon steel with a hardened and tempered blade. It is forged with a domed, anti-mushroom head. Not suitable for use on concrete or stone. Size 230 x 15 x 57mm (9 x 5/8 x 2.1/4in).

Flooring Chisel 57mm (2.1/4in) FOO2700

The Footprint No.45 Bolsters and Chisels merchandiser stand is an essential part of any hand tool retailer. The stand contains the following products 6 x Brick Bolsters 75mm (3in) 6 x Brick Bolsters 100mm (4in) 3 x Brick Bolsters 114mm (4.1/2in) 6 x Flooring/Electrician's Chisels 6 x Plugging Chisels 3 x Cold Chisels 177 x 19mm (7 x 3/4in) 3 x Cold Chisels 200 x 19mm (8 x 3/4in) 3 x Cold Chisels 228 x 22mm (9 x 7/8in) 3 x Cold Chisels 250 x 25mm (10 x 1in) 3 x Scutch Chisels 25mm (1in) 3 x Scutch Chisels 38mm (1.1/2in)

45 Bolsters and Chisels Stand with Stock FOO45

This Footprint Cold Chisel is supplied with a comfortable hand grip for extra safety. Ideal for use on stone, masonry, brickwork and other similar materials. It has a heavy-duty design and is made from a fully drop-forged single piece of carbon steel. The cutting edge is hardened and ground for a longer life and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain. 1 x Footprint 591 Cold Chisel with Hand Guard 250 x 25mm

591 Cold Chisel with Hand Guard 250 x 25mm FOO591101

590
Manufactured from forged carbon steel. With domed anti-mushroom head for added safety and longer tool life.  Manufactured to BS 3066.

590 10"x1" C/S Cold Chisel

Manufactured from carbon steel. Ideal for removing the mortar and cement from between brick and blockwork. Forged with domed anti mushroom head. Length: 265mm (10,1/2") hexagonal section 5/8" (16mm).

1860 10.1/2" Grooved Plugging Chisel

1237
Carbon steel, one piece drop forging means this is one tough chisel. Protective grip, anti-mushroom head, and strengthened neck make this brick bolster virtually indestructable.

Browse our original Footprint products in Cutting and Shaping Tools

We suggest upgrading to Chrome