Brand

Rating

Price

Special Offers

Plumbing & Pipe Tools - Free UK Delivery Over £25 - Buy Online | Zoro

he RDB-25 manual tube bender is the perfect machine for those hobbyists that need to bend tube on a budget. It is made from a sturdy cast iron frame and can be bench or pedestal mounted. The RDB-25 from Baileigh Industrial was designed to bend the most common sizes of tubing on safe centerline radii to ensure great looking bends.\n\nThis manual tubing bender comes standard with the following round tube die sets:\n\nImperial Metric\n\n3/8" OD x 2" CLR 9.5mm OD x 51mm CLR\n\n1/2" OD x 2.25" CLR 12.7mm OD x 57mm CLR\n\n9/16" OD x 2.5" CLR 14.3mm OD x 64mm CLR\n\n5/8" OD x 3" CLR 15.8mm OD x 76mm CLR\n\n3/4" OD x 3.5" CLR 19.1mm OD x 89mm CLR\n\n7/8" OD x 4.25" CLR 22.3mm OD x 108mm CLR\n\n3/4" Square x 3.75" CLR 19.1mm Square x 95mm CLR\n\n1" Square x 4.25" CLR 25.4mm Square x 108mm CLR\n\nAlso included is a handy carry case, which allows the bender to be stored when not in use.

RDB-25 Manual Tube Bender

The Baileigh RDB-480 is a programmable pipe bender that shapes material at blistering speeds with professional accuracy. It is made in the USA and runs on 415 volt three-phase power. The RDB-480 can tackle heavy-duty materials, bending up to 127mm tubing and 4” schedule 80 pipe. The rotary draw bender smoothly executes 180° bends in just 25 seconds and can complete up to 360° bends. The RDB-480 stores up to 170 programs of 10 bends each in its internal memory and accepts limitless external memory. It has an easy-to-use touchscreen or handy foot pedal that can both operate the bender, when not in manual mode. The 2-piece die mount loosens to release bent tubing without a hassle.
Here are some of the benefits of using the Baileigh RDB-480:

Increased productivity: The RDB-480 can bend material at blistering speeds, which can help you to increase your productivity.
Improved accuracy: The RDB-480 is designed to bend material with professional accuracy, which can help you to produce high-quality products.
Reduced costs: The RDB-480 can help you to reduce your costs by eliminating the need for manual bending.
Increased flexibility: The RDB-480 can bend a wide variety of materials, which can give you more flexibility in your fabrication projects.
If you are looking for a programmable pipe bender that can help you to increase your productivity, improve your accuracy, reduce your costs, and increase your flexibility, then the Baileigh RDB-480 is the perfect choice for you.

RDB-480 Baileigh Pipe Bender 2038227

The Baileigh R-H120 Hydraulic Roll Bender is a powerful and versatile machine that can be used to bend a wide variety of materials, including round tube, pipe, and sheet metal. The R-H120 features a double-pinch design with a fixed top roll and two bottom rolls that move independently, allowing for precise and repeatable bends. The machine also has hydraulically-driven lateral roll guides and guide rolls, which help to ensure a smooth and accurate bend. The R-H120 is built with a heavy-duty steel plate frame that is bolted and welded for strength and durability. The machine can be operated in both vertical and horizontal positions, making it ideal for a variety of applications.

Here are some of the key features of the Baileigh R-H120 Hydraulic Roll Bender:

Double-pinch design with a fixed top roll and two bottom rolls that move independently
Hydraulically-driven lateral roll guides and guide rolls
Heavy-duty steel plate frame that is bolted and welded
Can be operated in both vertical and horizontal positions
Mobile control pendant with digital readout for the roll positions and foot pedals for direction of operation
The Baileigh R-H120 Hydraulic Roll Bender is a powerful and versatile machine that is perfect for a variety of applications. If you are looking for a high-quality roll bender that can handle a wide variety of materials, the R-H120 is a great option.

Here are some additional benefits of using the Baileigh R-H120 Hydraulic Roll Bender:

Increased productivity: The R-H120's double-pinch design and hydraulic drive system allow for faster and more precise bending, which can lead to increased productivity.
Improved quality: The R-H120's precision bending capabilities can help to improve the quality of your finished products.
Reduced waste: The R-H120's double-pinch design helps to reduce waste by minimizing the amount of material that is wasted during the bending process.
If you are looking for a high-quality, versatile, and productive hydraulic roll bender, the Baileigh R-H120 is a great option.

Baileigh R-H120 Hydraulic Roll Bender 2000316

The RDB-100 from Baileigh Industrial is perfect for the fabricator that needs to bend lower production runs with very professional looking bends. Constructed of thick steel plate, the RDB-100 ships almost fully assembled, with only the stand needing to be attached and the handle to be bolted on. Like all top-loading tube and pipe benders from Baileigh Industrial, the RDB-100 was made to accept hundreds of round and square tubing die sets as well as round pipe dies sets.The RDB-100 is capable of bending up to 45mm (1.75") OD tubing with a maximum wall thickness of .095" (2.5 mm) and 1" schedule 40 pipe (48.3mm x 3.7mm).\n\nThe RDB-100 manual bender from Baileigh Industrial uses a large diameter indexing plate allowing the operator to bend up to 206° (180° plus springback) without having to re-index and re-pin, common on most other manual benders on the market. A tension springback mechanism holds the position as the bend mechanism grabs the next tooth on the index wheel. When requirements are for lighter gauge materials, the RDB-100 ratchet system can be shut off and the handle can be put into a manual override housing that allows the operator to simply walk around the bender and bend without the power of the indexing unit.\n\nA large degree scale displays your bend angle, and all the tooling has a start-of-bend indicator line, so complex bends can be made with ease. A quick release counter die system allows for quick loading and unloading of the material.\n\nFor more information on the RDB-100 or any of the other tube and pipe benders from Baileigh Industrial, please call today!

Tubing Bender - RDB-100

Want to upgrade from a manual to a hydraulic machine? The RDB-125 pipe bender is exactly what you're looking for. The first hydraulic tube and pipe bender in the range. This hydraulic tube and pipe bender is designed to work with all Baileigh Industrial drop on tool sets, and is constructed of only the best materials.\n\nThe RDB-125 operates much like the machine it was born from, the RDB-100, but also incorporates a hydraulic system to turn the ratchet plate and perform the bending. Requiring only 110 volts to power it, this tube and pipe bender uses powerful low pressure industrial grade hydraulics, meaning it is quiet, quick, and very safe, even when bending at full capacity. The RDB-125 has a capacity of 2.5" OD tubing, 2" OD chromalloy, 2" square tubing, and 2" schedule 40 pipe. The RDB-125 has a maximum center line of 8 (depending on the outside diameter of the material being bent).\n\nThe RDB-125 will bend to 200°, allowing for true 180° bends without having to repin the die set and it only takes 4 complete pushes to reach 180°. Using its built in anti-springback mechanism, the RDB-125 can retract its hydraulic cylinder without worry of losing its place in the bend. Simply retract and push again. A quick release counter die positioner is also included to make material loading and unloading a breeze.

RDB-125 Hydraulic Tube Bender

Looking for a quick economical way to bend flat metal into radii for your projects? Look no further than the MCB-650 from Baileigh Industrial. This is a fantastic manual flat bar bender to have for railings, fences, gates and for hundreds of additional applications. Baileigh Industrials MCB-650 flat bar bender is designed built to bend up to 8mm X 32mm mild steel or 6,5mm X 51mm mild steel as the maximum capacity.\n\nThe MCB-650 flat bar bender comes standard with 7 die sets from 25mm up to 76mm for flat metal. Other solid applications such as wire, rod, and bar can be bent as well up to 200 degrees. Like all other Baileigh Industrial metal benders, this machine is a good investment for any ornamental or fabrication shop.

MCB-650 Ornamental Bender

The true workhorse of the Baileigh Industrial line of tube and pipe benders is the RDB-350-TS. Designed and built in the USA to stand up to the rigors of production at any shop. This bender has the capacity to bend 2.5 schedule 40 pipe and up to 3 tube with a .187 wall thickness. As with all Baileigh Industrial tube and pipe benders, the RDB-350-TS accepts Baileigh Industrial's standard drop-on tooling. And if you have a unique application, Baileigh Industrial can make just about any custom tooling that your application will call for. The RDB-350-TS also features one shot bending to 360°, both left and right. 180° bends can be achieved in around 16 seconds, and a quick release counter die system allows for maximum efficiency.\n\nThe RDB-350-TS has a user friendly touch-screen controller that allows the user to store up to 170 programs, with up to 10 bends per program within the memory of the controller itself, and unlimited program storage with a micro SD memory card port (standard 2GB SD card, max). The RDB-350-TS can be programmed to incorporate many variables, such as desired angle, spring back for the material, and speed of bending. Another unique feature of this pipe bender is the 320° rotation of the controllers head. This feature allows the RDB-350-TS to be operated from any location around the machine.\n\nLike all Baileigh computer controlled tube and pipe benders, the RDB-350-TS can accept a rotary positioning table. This table is available in various lengths for repeatable bends in a single piece of material. When the table is attached to the bender, it helps achieve very accurate bends on varying planes, as well as consistent measurements between bends.

RDB-350-TS Touchscreen Programmable Tube Bender

The RDB-250 tube and pipe bender from Baileigh Industrial is a great addition to any fabrication shop. Powered by 220 volts, 50hz, single phase power, The RDB-250 has enough power to bend up to 62mm tubing (2.5") and 2" schedule 40 pipe (60mm x 4mm), making it extremely useful for any chassis or handrail application. Another nice feature of the RDB-250 is that it can bend to 180° in just 9 seconds, and can be programmed to bend up to 360° both left and right, great for solid rod applications using Baileigh Industrial's universal bend plate.\n\nThe RDB-250 makes quick work of complex serpentine bends due to its unique quick release counter die, and easy to use touch screen controller. The controller on the RDB-250 features an internal memory that can hold 170 programs with 10 bends per program. It also accepts a memory card (standard 2GB SD card, max) for unlimited storage. The RDB-250 can also be used in manual mode for those one-off prototypes for which setting a program is not nessesary. The RDB-250 has a foot pedal control for even more versatility.\n\nAnother nice feature of the RDB-250 is that it accepts an index table, important for keeping a section of bends during a program on the correct plane to achieve the most accurate finished product possible.\n\nThe RDB-250 from Baileigh Industrial is the most revolutionary and economical programmable tube and pipe bender on the market for its capacity.

Browse our original Baileigh products in Plumbing & Pipe Tools

We suggest upgrading to Chrome