Brand

Rating

Price

Special Offers

Product Type

Length

Thread Size

To Suit

Back Caps - Free UK Delivery Over £25 - Buy Online | Zoro

To suit all 17/18/26 type TIG torches, these back caps are designed to put pressure on the collet holding the electrode whilst welding, in order to reduce the risk of the electrode shorting out.

Features and Benefits
• Aids in preventing the tungsten electrode from shorting out
• Available in two sizes to suit your needs
• Simple yet effective insulator to hold the electrode in place whilst welding

Typical Applications
• TIG welding

Notes
• Please note images of products are for representation purposes only. Whilst every care is taken to provide accurate images of products, actual products may differ slightly

Designed to create a seal that prevents unwanted air from entering the back of the TIG torch when welding, these Back Caps are available in a range of sizes and specifications to suit your needs. Depending on the product selected, the caps can be used for either WP9 and WP20 torches, or WP17, WP18 and WP26.

Features and Benefits
• Available in a range of sizes and specifications to suit your needs
• Simple yet effective way of keeping your TIG torch working to an optimum level

Typical Applications
• TIG Welding

57Y_ _ To suit WP17/18/26 torches.
Fully compatible with most brands of Tig torches.

57Y02 Back Cap Long

Designed to create a seal that prevents unwanted air from entering the back of the TIG torch when welding, these Back Caps are available in a range of sizes and specifications to suit your needs. Depending on the product selected, the caps can be used for either WP9 and WP20 torches, or WP17, WP18 and WP26.

Features and Benefits
• Available in a range of sizes and specifications to suit your needs
• Simple yet effective way of keeping your TIG torch working to an optimum level

Typical Applications
• TIG Welding

41V24 Back Cap Long

TIG Back Cap Long, 112mm

Cougartron Wand for single FURY 200A brush. A replacement part for the FURY single brush twisting shroud set.

A spare Cougartron wand to be used with the Cougartron FURY twisting shroud for a single brush.

The wand is compatible with the FURY 200A brush only but can be used with other Cougartron brushes with the addition of a special M6 adaptor that can be easily connected to the FURY wand.

Replacement Wand for Fury Single Brush Twist Shroud WELC2547

Cougartron FURY Twisting Shroud Set for a single FURY 200A brush. The twisting shroud allows you to precisely control the length of the brush and protect it from damage.

New Single brush set specifically developed for Cougartron FURY 200A brush. You can now use only one FURY brush when cleaning smaller and less-oxidized welds – where the use of multiple brushes is not needed.

The set consists of:

 New Cougartron Wand with M8 thread. (M8 thread is compatible with FURY brush only) 
 Twist shroud – compatible with the wand (WELC2547) 

Twisting shrouds provide several prominent benefits:

 Firm positioning – the shroud is fixed and will not move during cleaning or polishing.
 Precise control of the brush tip without moving the shroud up and down
 It also protects your brush crimp and the brush threads from damage.

If you screw a special the M6 adapter (WELC2546) onto the wand, the set becomes compatible with other Cougartron brushes – Powerbrush, Superbrush, or Pipebrush.

Compatibility

 Superbrush – WELC3146

Tip: If you want to use the Cougartron FURY brush, use the FURY Quad Brush Set (WELC2457) (that is compatible with FURY 200A weld cleaning brush)

Cougarton Fury Wand & Twist Shroud Set - for Single Brush WELC2470

Spare Twist Shroud for the FURY triple brush assembly. The shroud is used for insulation, crimp, and brush protection.

Using the twisting shroud, you will be able to control the length of the brushes precisely, significantly increase the durability of the brushes, and clean welds more effectively.

IMPORTANT: always leave only tips of the brushes uncovered during weld cleaning or electropolishing. (scroll down to watch a demonstration video – how to correctly setup the twisting shroud) 

Compatibility

 Cougartron FURY 3 Brush Wand (WELC2326) 
 Cougartron FURY 200A brush (WELC3149)

Replacement Fury Triple Brush Twist Shroud WELC2327

BACK CAP SHORT TO SUIT PRO TYPE 17/18/26 TORCHES

Pro Back Cap 57Y04

Clean welds and surfaces four times faster with the new Cougartron FURY Quad Brush Set.

Now you can clean welds faster and more effectively by using four FURY 200A brushes simultaneously.

The advantage of the quad brush assembly is that you can cover a larger surface area and clean significantly faster.

The specially designed twisting shroud to fit this assembly is heat resistant, protects the brush crimps, and stays in the desired position during the weld cleaning or polishing process.

The set consists of:

 FURY Wand with quad brush adapter. This adapter is only compatible with the FURY 200A brush.
 WELC2573 FURY Quad brush twisting shroud

If you want to connect a different Cougartron brush such as Powerbrush or Superbrush – you can use the special quad brush adaptor with M6 thread (WELC2010) with the single InoxFURY wand (WELC2547) or purchase the entire set (WELC2214) with the Wand, twist shroud and M6 quad brush adapter.

Fury Quad Brush Assembly WELC2457

A spare twisting shroud for Cougartron Quad Brush Sets. Made from high-quality material to withstand high temperatures. A twisting shroud is an effective tool that will protect weld cleaning brushes from damage and help them to last longer.

The quad brush twisting shroud covers and protects the brush which makes it an essential component during weld cleaning.

It is mounted on the wand and the adapter after which it is fixed to the desired position using twist movements.

Tip: The shroud must cover most of the brush, where only the brush tips are left uncovered for the weld cleaning or polishing process.

As the brush gets shorter, you can adjust the shroud to suit.

Compatibility:

 WELC2457 - FURY Quad Brush Set
 WELC2214 - Cougartron Quad Brush Set
 WELC2010 - Quad Brush Adapter (for Powerbrush and Superbrush)

Replacement Fury Quad Brush Twisting Shroud WELC2573

Cougartron double brush adaptor holds two brushes at the same time to cover a larger surface area and achieve faster weld cleaning and polishing results.

Using two brushes will also optimize the cleaning performance with stronger weld cleaners like ProPlus or FURY.

Compatibility

Powerbrush � WELC3101  
Superbrush � WELC3146  
Wand - WELC2547  
Double Brush Twist Shroud - WELC2572  

It is recommended to replace the adaptor immediately if you spot any signs of damage.

M6 Double Brush Adapter WELC2006

CGT Wand with double brush adaptor & sliding shroud.

Wand Twist Shroud Set - for 2x M6 Brush WELC2188

Replacement FURY Twist Shroud (for single brush) The twisting shroud will improve your cleaning performance and increase the longevity of your weld cleaning brush.

A spare twisting shroud for the FURY 200A single brush set (WELC2470) 

The twist shroud is used together with the Cougartron FURY Wand (WELC2547) .

Depending on the length of the brush, you can twist the shroud as far as necessary to keep only the tips of the brush uncovered and ready for weld cleaning.

The rest of the brush and the brush crimp stay protected by the shroud.

The shroud can withstand high temperatures and will not move up and down during weld cleaning.

Replacement Fury Twist Shroud for Single Brush WELC2545

Cougartron Twist Shroud is mounted on the brush wand and controls the length of the brush.

Twisting Shroud (for single brush) is mounted on the brush wand and allows to precisely control the length of the brush.

Use the twist shroud to:

 Prolong weld cleaning brush life
 Achieve better heat tolerance – resistant up to 327°C (620 F) 
 Adjust the length of the brush precisely – only the tip of the brush should be visible and used during weld cleaning and polishing tasks.
 The twisting shroud for a single brush is compatible with:

Cougartron Wand to Suit Twist Shroud – WELC2235
If damaged – replace immediately.
Compatibility

 Powerbrush
 Superbrush
 PipeBrush
 Thunderbrush

Replacement Twist Shroud WELC2227

Cougartron brush assembly for cleaning welds and surfaces with four brushes simultaneously. The assembly can be used for surface cleaning on large stainless-steel structures.

A complete assembly for cleaning with four brushes* simultaneously.

The Cougartron Four Brush Set is ideal for cleaning surface rust and other contaminants off of the stainless steel surface.

We recommend using the set with Cougartron ProPlus, FURY 100 or FURY 200 weld cleaners that have enough power to efficiently support the use of 4 brushes at once.

The assembly consists of:

 FURY Wand – WELC2547
 Quad brush adapter – WELC2010
 Quad Brush Twisting Shroud – WELC2573

Compatibility

 Superbrush – WELC3146

It is recommended to replace the adaptor immediately if you spot any signs of damage.

4 Brush Set - Wand, Adapter & Twist Shroud WELC2214

The twist shroud allows you to precisely control the length of the brush tip and extend the life of your weld cleaning brush.

With Cougartron twisting shroud you have more control over your brush than ever – this unique twist design means that you can precisely choose and control the brush length. The twisting shroud supersedes the sliding shroud version which delivers less control.

Features

 No more problems with damaged brushes
 Increase brush life by up to 100%
 Work up to 50% faster
 Replaceable shroud
 Components heat resistant to 327°C (620 F) 

Compatibility:

 Powerbrush – WELC3101, WELC3105
 Superbrush – WELC3146

Wand & Twist Shroud Assembly WELC2226

The Quad Brush Adaptor holds 4 brushes* simultaneously for faster and more efficient weld cleaning with powerful weld cleaners – such as Cougartron FURY 100 and FURY 200.

By using four brushes during weld cleaning, you will be able to cover and clean a larger surface area and clean a larger part of the weld or metal surface with a single stroke.

If damaged – replace the adaptor immediately.

Compatibility

 Superbrush – WELC3146

Tip: If you want to use the Cougartron FURY brush, use the FURY Quad Brush Set (WELC2457) (that is compatible with FURY 200A weld cleaning brush)

M6 Quad Brush Adapter WELC2010

The long brush shroud protects the crimp of the brush and prevents the fibers on a new brush from being damaged. The shroud was developed to be used together with Cougartron angle adaptors to clean hard-to-reach areas and surfaces effectively.

The long brush shroud protects the crimp of the brush and prevents the fibers on a new brush from being damaged.

The long shroud is mounted in situations where it is impossible to use the twisting or the sliding shroud.

It is also used together with Cougartron angle adaptors used mostly to clean difficult-to-reach areas and surfaces.

The Long brush shroud is ideal to use for a completely new or mildly used weld cleaning brush – so the shroud can cover and protect most of the brush. Once the brush becomes shorter after use, we recommend switching to the Cougartron Single Short Brush Shroud – WELC2001

Compatibility:

 WELC3101 - Cougartron Powerbrush
 WELC3146 - Cougartron Superbrush
 WELC2014, WELC2175, WELC2199 - Cougartron Angle Adaptors
 WELC2001 - Single Short Brush Shroud

Single Long Brush Fixed Shroud WELC2038

The shroud covers the copper crimp of the Thunderbrush III weld cleaning brush and prevents the reaction (arcing) with the metal work piece.

Compatibility:

 WELC3091 - Cougartron Thunderbrush

ThunderBrush III Large Shroud WELC2090

The role of the short brush shroud is to protect the metal crimp on the brush from being damaged. The shroud was developed to be used with Cougartron angle adaptors in order to clean difficult-to-reach welds and surfaces effectively.

The role of the short brush shroud is to protect the metal crimp on the brush from being damaged.

The fixed shroud is best used in combination with the angle adaptors � and when it is impossible to use the sliding or the twisting shroud for single brush.

Important: The short shroud is best used for shorter, worn-out brushes. If you have a fresh, new weld cleaning brush with longer threads, we recommend to use Cougartron Single Long Brush Shroud � WELC2038

Compatibility:

 WELC3101 - Cougartron Powerbrush
 WELC3146 - Cougartron Superbrush
 WELC2014, WELC2175 & WELC2199 - Cougartron Angle Adaptors
 WELC2056 & WELC2226 - Cougartron Wands

Find Back Caps Products

We suggest upgrading to Chrome