Brand

Rating

Price

Special Offers

Height

Length

Width

Safety - Free UK Delivery Over £25 - Buy Online | Zoro

E-series electric heater, E 18, air flow rate 960 m/h, 12/18 kW, CEE, LxWxH 666 x 320 x 435 mm. Supplied = assembled. Width = 320 mm. Length = 666 mm. Height = 435 mm. Max. air volume = 960 m/h. Nominal thermal capacity = 9/18 kW. Product type = heaters. Comfortable heat when cold spells occur, or in transitional periods. No odours and no oxygen consumption. Integrated room thermostat, can also be used as a frost monitor. Can also be used as a fan in summer. Ideal for heating small to medium sized rooms and as frost protection monitor. The smaller models are also perfect auxiliary heaters in large rooms. For workshops, nurseries, sales and showrooms, storage rooms, construction sites, construction containers and much more. Efficient: the warm air is supplied electrically to the room directly by means of resistance heaters, and heat is distributed by means of axial fans. Comfortable: due to electrical operation, the electric heaters do not require oxygen and are therefore ideal for use in poorly ventilated or unventilated rooms. No further installation necessary. The warm air temperature is adjustable and is controlled by means of a thermostat. Robust and safe: all devices are VDE-tested and additionally thermally protected by a bimetallic switch. The heating elements are coated to protect them against corrosion, the housings are made of galvanised sheet steel and are additionally powder coated. The design ensures stability. Mobile and easy to transport. Compact dimensions enable use in the smallest of spaces. CEE connection 32A.

E-series Electric Heater, E 18, Air Flow Rate 960 m³/h, 12/18 kW, CEE, LxWxH 666 X 320 X 435mm

Prefilter for LR5300 air purifier, coarse dust filter class G4 (EN 779) , separation efficiency 85 - 98%. Supplied = assembled. Product type = accessories. Z-line coarse dust filter as a prefilter for the main filter. For specific coarse dust particles up to 3 m. Separation efficiency 85 - 98% for 10 m particles and 30 - 55% for 1 m particles. Note: regardless of the filter cartridge indicator, the filter must be replaced after any work with pollutants. If the composition of the filtered particles is unknown, then the complete filter should be replaced after use on the respective construction site. Both filters must be replaced to ensure the dust (contaminants) cannot be introduced into clean areas.

Prefilter For LR5300 Air Purifier - Coarse Dust Filter Class G4 (EN 779)

E-series electric heater, E 8, air flow rate 420 m/h, LxWxH 530 x 285 x 395 mm. Supplied = assembled. Width = 285 mm. Length = 530 mm. Height = 395 mm. Max. air volume = 420 m/h. Noise level = 56 dB (A) Temperature increase = 41 K. Nominal thermal load = 4/8 kW. Mains voltage = 400 V. Product type = heaters. Comfortable heat when cold spells occur, or in transitional periods. No odours and no oxygen consumption. Integrated room thermostat, can also be used as a frost monitor. Can also be used as a fan in summer. Ideal for heating small to medium sized rooms and as frost protection monitor. The smaller models are also perfect auxiliary heaters in large rooms. For workshops, nurseries, sales and showrooms, storage rooms, construction sites, construction containers and much more. Efficient: the warm air is supplied electrically to the room directly by means of resistance heaters, and heat is distributed by means of axial fans. Comfortable: due to electrical operation, the electric heaters do not require oxygen and are therefore ideal for use in poorly ventilated or unventilated rooms. No further installation necessary. The warm air temperature is adjustable and is controlled by means of a thermostat. Robust and safe: all devices are VDE-tested and additionally thermally protected by a bimetallic switch. The heating elements are coated to protect them against corrosion, the housings are made of galvanised sheet steel and are additionally powder coated. The design ensures stability. Mobile and easy to transport. Compact dimensions enable use in the smallest of spaces. Length x width x depth 530 x 285 x 395 mm. CEE plug. CEE connection 16A.

E-series Electric Heater, E 8, Air Flow Rate 420 m³/h, LxWxH 530 X 285 X 395mm

E-series electric heater, E 3, air flow rate 185 m/h, LxWxH 330 x 185 x 270 mm. Supplied = assembled. Width = 185 mm. Length = 330 mm. Height = 270 mm. Max. air volume = 185 m/h. Noise level = 52 dB (A) Temperature increase = 44 K. Nominal thermal load = 3 kW. Mains voltage = 230 V. Product type = heaters. Comfortable heat when cold spells occur, or in transitional periods. No odours and no oxygen consumption. Integrated room thermostat, can also be used as a frost monitor. Can also be used as a fan in summer. Ideal for heating small to medium sized rooms and as frost protection monitor. The smaller models are also perfect auxiliary heaters in large rooms. For workshops, nurseries, sales and showrooms, storage rooms, construction sites, construction containers and much more. Efficient: the warm air is supplied electrically to the room directly by means of resistance heaters, and heat is distributed by means of axial fans. Comfortable: due to electrical operation, the electric heaters do not require oxygen and are therefore ideal for use in poorly ventilated or unventilated rooms. No further installation necessary. The warm air temperature is adjustable and is controlled by means of a thermostat. Robust and safe: all devices are VDE-tested and additionally thermally protected by a bimetallic switch. The heating elements are coated to protect them against corrosion, the housings are made of galvanised sheet steel and are additionally powder coated. The design ensures stability. Mobile and easy to transport. Compact dimensions enable use in the smallest of spaces. Length x width x height 330 x 185 x 270 mm. Safety plug.

E-series Electric Heater, E 3, Air Flow Rate 185 m³/h, LxWxH 330 X 185 X 270mm

Mobile air dehumidifier, volumetric air flow 1000 m/h, dehumidification capacity 60 l/24h. Supplied = assembled. Dehumidification capacity = 60/24 l/h. Width = 560 mm. Weight = 40 kg. Height = 1000 mm. Depth = 530 mm. Volumetric flow rate = 1000 m/h. Easy to set up - immediately ready for use. Automatic hot gas defrosting - uninterrupted operation even when in constant use. Low noise operation. Large operating range from 0 to 35 °C/at 30 °C to 95% air humidity. Integrated hygrostat. Sturdy steel housing, powder coated. Includes operating hours meter - therefore also suitable for rental. Hot gas defrosting. Water collection container 6 litres. Modular design. Stackable. Dehumidification capacity 60 l/24h. Volumetric air flow 1000 m/h. Power consumption 1.07 kW. Length x width x height 560 x 530 x 1000 mm.

Mobile Air Dehumidifier, Volumetric Air Flow 1000 m³/h, Dehumidification Capacity 60 L/24h

Oil heater, air flow rate 1150 m/h, LxWxH 1209 x 482 x 738 mm. Supplied = pre-assembled, final assembly by customer. Width = 482 mm. Length = 1209 mm. Height = 738 mm. Max. air volume = 1150 m/h. Nominal thermal load = 34.1 kW. Product type = heaters. Suitable for all heated areas. With room thermostat connection. Can also be operated with a hot air hose. The oil is supplied from an attached tank by means of a high-pressure pump. Includes heater oil filter and room thermostat connection. Housing made of powder coated sheet steel. Connection 230 V/50 Hz. Note: in closed rooms the oil heaters may only be operated with an exhaust hose (available upon request) Tank capacity 46 litres.

Oil Heater, Air Flow Rate 1150 m³/h, LxWxH 1209 X 482 X 738mm

Air dehumidifier, dehumidification capacity 40 l/24 h, LxWxH 830 x 495 x 610 mm. Supplied = assembled. Dehumidification capacity = 40/24 l/h. Width = 495 mm. Weight = 37 kg. Height = 610 mm. Depth = 830 mm. Easy to set up and ready for use immediately. Low noise operation. Automatic hot gas defrosting - uninterrupted operation even when in constant use. The electric auxiliary heater increases the room temperature and improves the dehumidification capacity. Durable - easy to clean. Ideal for the construction of new buildings, for renovations and for water damage. The automatic hot gas defrosting ensures uninterrupted operation even when in constant use. This provides increased efficiency and very short operating breaks. Can be used from 0 to 35 °C and 30 to 95% air humidity. The electric auxiliary heater (2 kW) increases the room temperature when the weather is cold, and thereby improves the dehumidification capacity. The sturdy and easy to clean long-term filter increases the service life of the device. CFC free refrigerant to protect the environment. An LCD display provides information about the operating status. Electronic controller and safety for a fully automatic function. Includes operating hours meter - therefore also suitable for rental.

Air Dehumidifier, Dehumidification Capacity 40 L/24 H, LxWxH 830 X 495 X 610mm

Mobile air dehumidifier, volumetric air flow 580 m/h, dehumidification capacity 30 l/24h. Supplied = assembled. Dehumidification capacity = 30/24 l/h. Width = 570 mm. Weight = 34 kg. Height = 980 mm. Depth = 480 mm. Volumetric flow rate = 580 m/h. Easy to set up - immediately ready for use. Automatic hot gas defrosting - uninterrupted operation even when in constant use. Low noise operation. Large operating range from 0 to 35 °C/at 30 °C to 95% air humidity. Integrated hygrostat. Sturdy steel housing, powder coated. Includes operating hours meter - therefore also suitable for rental. Hot gas defrosting. Water collection container 6 litres. Modular design. Stackable. Dehumidification capacity 30 l/24h. Volumetric air flow 580 m/h. Power consumption 0.65 kW. Length x width x height 570 x 480 x 980 mm.

Mobile Air Dehumidifier, Volumetric Air Flow 580 m³/h, Dehumidification Capacity 30 L/24h

E-series electric heater, E 18SH, air flow rate 960 m/h, CEE, with thermostat connection, LxWxH 990 x 320 x 435 mm. Supplied = assembled. Width = 320 mm. Length = 990 mm. Height = 435 mm. Max. air volume = 960 m/h. Nominal thermal capacity = 9/18 kW. Product type = heaters. Powerful blower for higher pressure (100 Pa) Suitable for use at higher ambient temperatures up to 60 °C. Fast heating effect due to better temperature increase (60 K) External room thermostat can be connected. Comfortable heat when cold spells occur, or in transitional periods. No odours and no oxygen consumption. Integrated room thermostat, can also be used as a frost monitor. Can also be used as a fan in summer. Ideal for heating small to medium sized rooms and as frost protection monitor. The smaller models are also perfect auxiliary heaters in large rooms. For workshops, nurseries, sales and showrooms, storage rooms, construction sites, construction containers and much more. Efficient: the warm air is supplied electrically to the room directly by means of resistance heaters, and heat is distributed by means of axial fans. Comfortable: due to electrical operation, the electric heaters do not require oxygen and are therefore ideal for use in poorly ventilated or unventilated rooms. No further installation necessary. The warm air temperature is adjustable and is controlled by means of a thermostat. Robust and safe: all devices are VDE-tested and additionally thermally protected by a bimetallic switch. The heating elements are coated to protect them against corrosion, the housings are made of galvanised sheet steel and are additionally powder coated. The design ensures stability. Mobile and easy to transport. Compact dimensions enable use in the smallest of spaces. CEE connection 32A.

E-series Electric Heater - E 18SH

Air dehumidifier, dehumidification capacity 80 l/24 h, LxWxH 615 x 620 x 860 mm. Supplied = assembled. Dehumidification capacity = 80/24 l/h. Width = 620 mm. Weight = 52 kg. Height = 860 mm. Depth = 615 mm. Easy to set up and ready for use immediately. Low noise operation. Automatic hot gas defrosting - uninterrupted operation even when in constant use. The electric auxiliary heater increases the room temperature and improves the dehumidification capacity. Durable - easy to clean. Ideal for the construction of new buildings, for renovations and for water damage. The automatic hot gas defrosting ensures uninterrupted operation even when in constant use. This provides increased efficiency and very short operating breaks. Can be used from 0 to 35 °C and 30 to 95% air humidity. The electric auxiliary heater (2 kW) increases the room temperature when the weather is cold, and thereby improves the dehumidification capacity. The sturdy and easy to clean long-term filter increases the service life of the device. CFC free refrigerant to protect the environment. An LCD display provides information about the operating status. Electronic controller and safety for a fully automatic function. Includes operating hours meter - therefore also suitable for rental.

Air Dehumidifier, Dehumidification Capacity 80 L/24 H, LxWxH 615 X 620 X 860mm

E-series electric heater, E 12, air flow rate 735 m/h, 6/12 kW, CEE, LxWxH 666 x 320 x 435 mm. Supplied = assembled. Width = 320 mm. Length = 666 mm. Height = 435 mm. Max. air volume = 735 m/h. Nominal thermal capacity = 6/12 kW. Product type = heaters. Comfortable heat when cold spells occur, or in transitional periods. No odours and no oxygen consumption. Integrated room thermostat, can also be used as a frost monitor. Can also be used as a fan in summer. Ideal for heating small to medium sized rooms and as frost protection monitor. The smaller models are also perfect auxiliary heaters in large rooms. For workshops, nurseries, sales and showrooms, storage rooms, construction sites, construction containers and much more. Efficient: the warm air is supplied electrically to the room directly by means of resistance heaters, and heat is distributed by means of axial fans. Comfortable: due to electrical operation, the electric heaters do not require oxygen and are therefore ideal for use in poorly ventilated or unventilated rooms. No further installation necessary. The warm air temperature is adjustable and is controlled by means of a thermostat. Robust and safe: all devices are VDE-tested and additionally thermally protected by a bimetallic switch. The heating elements are coated to protect them against corrosion, the housings are made of galvanised sheet steel and are additionally powder coated. The design ensures stability. Mobile and easy to transport. Compact dimensions enable use in the smallest of spaces. CEE connection 32A.

E-series Electric Heater, E 12, Air Flow Rate 735 m³/h, 6/12 kW, CEE, LxWxH 666 X 320 X 435mm

Oil heater, air flow rate 4300 m³/h, LxWxH 1740 x 690 x 1025 mm. Supplied = pre-assembled, final assembly by customer. Width = 690 mm. Length = 1740 mm. Height = 1025 mm. Max. air volume = 4300 m³/h. Nominal thermal load = 90.6 kW. Product type = heaters. Suitable for all heated areas. With room thermostat connection. Can also be operated with a hot air hose. The oil is supplied from an attached tank by means of a high-pressure pump. Includes heater oil filter and room thermostat connection. Housing made of powder coated sheet steel. Connection 230 V/50 Hz. Note: in closed rooms the oil heaters may only be operated with an exhaust hose (available upon request) !

Browse our original Kroll products in Safety

We suggest upgrading to Chrome