LeadTime

Brand

Rating

Price

Special Offers

Diameter

Product Material

Product Type

Electrode Length

Recommended Amperage

Recommended Welding Positions

Welding Current

Rating (Amps)

Includes

ARC Welding - Free UK Delivery Over £25 - Buy Online | Zoro

An open head electrode holder with a fully insulated head and handle.

•Overall length: 250mm
•60% duty cycle at 310A
•35% duty cycle at 400A

A reliable, general purpose electrode for manual metal arc welding of carbon steels, carbon manganese steels and fine-grained carbon manganese steels with elevated yield strength

Features and Benefits:
■ H4 R approved.
■ Low diffusible hydrogen to reduce the risk for cold cracking
■ Outstanding low moisture pick up
■ High efficiency bringing productivity
■ Extremely good weldability in vertical up position
■ Exceptional weld appearance

Industries:

■ Civil Construction
■ Energy
■ Industrial and General Fabrication
■ Light Fabrication
■ Marine and Offshore

High quality 5356 grade aluminium TIG welding wire. Contains 5% magnesium. 5356 is the most widely used welding alloy and can be classified as a general-purpose filler alloy. It is typically chosen because of its relatively high shear strength. 

The 5356 alloy base material has a weld pool chemistry greater than 3% Mg and service temperatures in excess of 650°C. 5356 gives a high strength weld deposit with very good crack resistance. Corrosion resistance is very good especially in a marine atmosphere. 

Typical all weld metal composition - Si <0.25%, Mn 0.15%, Cr 0.1%, Fe <0.4, Mg 5.0, Al bal. Welding current DC(+)

All-round, rutile electrode that is relatively insensitive to rust or other surface impurities. It deposits smooth weld beads in all positions, including vertical down, and the slag is easy to remove. OK 46.00 is very easy to strike and restrike, making it ideal for short welds, root runs and tacking.


Typical Applications:
■ Applications cover the full range of mild steel weldments from thin sheet steel and sections for the consumer market through to ship quality and structural steel for use in heavy engineering.

Bare, corrosion-resistant, chromium-nickel-molybdenum rods for welding austenitic stainless alloys of the 18% Cr-8% Ni and 18% Cr-10% Ni-3% Mo types. 

OK Tigrod 316L has good general corrosion resistance, particularly to corrosion in acid and chlorinated environments. The alloy has a low carbon content which makes it particularly recommended when there is a risk of intergranular corrosion. 

The alloy is widely used in the chemical and food-processing industries, as well as in shipbuilding and various types of architectual structure.

OK Autrod 4043 is one of the most widely used welding and brazing alloys and can be classified as a general-purpose filler alloy. The silicon addition results in improved fluidity (wetting action), making the alloy the preferred choice of welders. The alloy is not sensitive to weld cracking and produces bright, almost smut-free welds. Not recommended for anodising. Non-heat treatable.

Bare corrosion resisting chromium-nickel rods. OK Tigrod 16.10 has a good general corrosion resistance. The alloy has a low carbon content which makes this alloy particularly recommended where there is a risc of intergranular corrosion. 

The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers. For joining of stainless steels of 18% Cr - 8% Ni-type with low carbon content and Nb-stabilised steels of the same type if the service temperature will not exceed 350ºC. Can also be used for welding of Cr-steels except in sulphur rich environments.
Welding current DC(-)
Type Austenitic

High quality 309L grade stainless steel TIG welding wire. A continuous solid corrosion resisting chromium-nickel wire for joining stainless steels to non-alloy or low alloy steels as well as welding of austenitic stainless alloys of 24% Cr, 13% Ni types. 309L TIG wire has a good general corrosion resistance. The higher silicon content improves the welding properties such as wetting. When used for joining dissimilar materials the corrosion resistance is of secondary importance. Welding current DC (+)

This earth clamp is robustly constructed from substantial castings and is suitable for up to 600 amps.

Features and Benefits
• The screw lever allows maximum compression to the workpiece

Typical Applications
• ARC Welding

Screw Type Earth Clamp, 600A

A 'screw type' electrode holder with a fully insulated head and handle.

Electrode Holder - MUR8850374M

This earth clamp provides good contact with the work piece and helps to keep users safe when creating an electrical current for ARC welding.

Features and Benefits
• Provides good contact with the workpiece
• Designed to effectively clamp the workpiece and keep the user safe

Typical Applications
• ARC Welding

Return Clamp - MUR8850374C

A reliable, general purpose electrode for manual metal arc welding of carbon steels, carbon manganese steels and fine-grained carbon manganese steels with elevated yield strength

Features and Benefits:
■ H4 R approved.
■ Low diffusible hydrogen to reduce the risk for cold cracking
■ Outstanding low moisture pick up
■ High efficiency bringing productivity
■ Extremely good weldability in vertical up position
■ Exceptional weld appearance

Industries:

■ Civil Construction
■ Energy
■ Industrial and General Fabrication
■ Light Fabrication
■ Marine and Offshore

2.5mm OK 48.00 Low Hydrogen Welding Rods E7018. Vacuum Packed 0.7KG- 48002530K0

High quality 5356 grade aluminium TIG welding wire. Contains 5% magnesium. 5356 is the most widely used welding alloy and can be classified as a general-purpose filler alloy. It is typically chosen because of its relatively high shear strength. 

The 5356 alloy base material has a weld pool chemistry greater than 3% Mg and service temperatures in excess of 650°C. 5356 gives a high strength weld deposit with very good crack resistance. Corrosion resistance is very good especially in a marine atmosphere. 

Typical all weld metal composition - Si <0.25%, Mn 0.15%, Cr 0.1%, Fe <0.4, Mg 5.0, Al bal. Welding current DC(+)

2.4mm OK Tigrod 5356 2.5K (181524R120)

All-round, rutile electrode that is relatively insensitive to rust or other surface impurities. It deposits smooth weld beads in all positions, including vertical down, and the slag is easy to remove. OK 46.00 is very easy to strike and restrike, making it ideal for short welds, root runs and tacking.


Typical Applications:
■ Applications cover the full range of mild steel weldments from thin sheet steel and sections for the consumer market through to ship quality and structural steel for use in heavy engineering.

2.5mm OK46.00 Mildtrode E6013 Welding Rods 5.5kg - 4600253200

Bare, corrosion-resistant, chromium-nickel-molybdenum rods for welding austenitic stainless alloys of the 18% Cr-8% Ni and 18% Cr-10% Ni-3% Mo types. 

OK Tigrod 316L has good general corrosion resistance, particularly to corrosion in acid and chlorinated environments. The alloy has a low carbon content which makes it particularly recommended when there is a risk of intergranular corrosion. 

The alloy is widely used in the chemical and food-processing industries, as well as in shipbuilding and various types of architectual structure.

1.6mm OK Tigrod 316L Stainless Steel 5kg (163016R150)

2.4mm OK Tigrod 4043 x 1000MM, 2.5kg Pack (180424R120)

EMP 235ic - The next series of Rebel welding machines that offer TRUE multi-process performance in a portable/mobile package. When it comes to getting around and getting work done, Rebel EMP 235ic is second to none. It's the most mobile welder in its class and has the power and performance to crush even the most demanding jobs.

Features:

• True Multi-Process -excellent performance on MIG/MAG, TIG and MMA.

• Extremely user friendly and multilingual TFT-panel incorporating spare part lists and weld parameter guides for all processes.

• Portable -weighing in at 28.6 kg with dual voltage capability and 4 handle roll cage.

• Power to Perform -capable of running any wire from 0.6 mm to 1.0 mm and also cored wires up to 1.2 mm on both 200 and 300 mm spools.

• Full MMA performance with electrodes up to 4 mm and excellent Lift TIG performance with adjustable pre/post gas flow and weld current ramp up/down.

    sMIGTechnology -innovative "smart-MIG" feature that dynamically monitors the arc characteristics ultimately adapting to your technique resulting in a smooth, stable arc. Set wire diameter, material and plate thickness and you are ready to weld.

• Two gas inlets, one for MIG and one for TIG where both can be connected simultaneously. Built in TIG gas solenoid valve on the front of the machine eliminating the need for a manual valve on the TIG torch.

• Delivery includes: Power source with 3m mains cable and plug, MXL™ 270 3m torch, welding and return cable kit 3m, gas hose with quick connector 4,5 m, drive rolls and contact tips.

0700300989 Rebel EMP 235IC ARC Welder 'CE'

Bare corrosion resisting chromium-nickel rods. OK Tigrod 16.10 has a good general corrosion resistance. The alloy has a low carbon content which makes this alloy particularly recommended where there is a risc of intergranular corrosion. 

The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers. For joining of stainless steels of 18% Cr - 8% Ni-type with low carbon content and Nb-stabilised steels of the same type if the service temperature will not exceed 350ºC. Can also be used for welding of Cr-steels except in sulphur rich environments.
Welding current DC(-)
Type Austenitic

Browse our original Esab products in ARC Welding

We suggest upgrading to Chrome