LeadTime

Brand

Rating

Price

Special Offers

Type

Diameter

Wire Diameter

Width

Wire Wheels & Brushes - Free UK Delivery Over £25 - Buy Online | Zoro

A crimped steel circular wire brush designed to be mounted on a bench grinder. The wire wheels are ideal for the removal of rust, corrosion, paint, weld spatter and general surface deburring. It is supplied complete with plastic inserts (bushes) to enable the wheel to be mounted on grinders with smaller drive spindles.

This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting.  Fitted with a 6mm (1/4in) shank and designed to operate with power tools up to a maximum of 4,500/min.  Shaft: 6mm (1/4in).  Wire: 0.30mm crimped steel wire.  Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.

This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and designed to operate with power tools up to a maximum of 4,500/min. Shaft 6mm (1/4in). Wire 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards.

This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting.  The wire brush is fitted with a 6mm (1/4in) shank and is designed to operate with power tools with a maximum speed of 4,500/min.  Type: Cup.

These Faithfull brushes have nylon bristles for use on wood, metal and stone. They have many times the life of a wire brush. Conform to ISO 9001 and DIN EN1083-1 and 2.  The 6mm shank enables them to be used with a power tool with a maximum of 4500rpm.

This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications.  Suitable for use in industrial power tools at higher speeds.

Faithfull Conical Knot Brush with high tensile steel wire. Ideal for work in hard-to-reach places such as edges or corners. Suitable for the removal of slag, rust, scale or even dried cement.  Max. Cutting Speed: 12,500 rpm.

This Faithfull Wire Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. It can be used in industrial power tools at higher speeds.  Type: Cup  Maximum speed: 12,000/min.

Faithfull Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder.  Suitable for industrial use and more specialist applications.

The Faithfull FAIWBWW200 conforms to ISO 9001 and DIN EN1083-1 and 2 and has the following specifications:Diameter: 200mm x 25mm faceBore range size: 32mm (25, 22, 20, 16 amp;12mm bushes included)Wire: 0.3mmType: Circular

Wire Wheel 200 X 25MM, 32MM Bore, 0.30MM Wire

A crimped steel circular wire brush designed to be mounted on a bench grinder. The wire wheels are ideal for the removal of rust, corrosion, paint, weld spatter and general surface deburring. It is supplied complete with plastic inserts (bushes) to enable the wheel to be mounted on grinders with smaller drive spindles. The Faithfull FAIWBWW150 conforms to ISO 9001 and DIN EN1083-1 and 2 and has the following specifications Diameter 150mm x 23mm face Bore size 32mm (25, 22, 20, 16 & 12mm bushes included) Wire 0.3mm Type Circular

Wire Wheel 150 x 23mm, 32mm Bore, 0.30mm Wire FAIWBWW150

This Faithfull crimped steel Wire Circular Brush is designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and designed to operate with power tools up to a maximum of 4,500/min. Shaft 6mm (1/4in). Wire 0.30mm crimped steel wire. Conforms to ISO 9001 and DIN EN1083-1 and 2 standards. Diameter 50mm.

Wire Brush 50mm x 6mm Shank, 0.30 Wire FAIWBS50C

The Faithfull crimped brass wire circular brush designed for light to medium-duty applications such as cleaning metal surfaces prior to welding or painting. Fitted with a 6mm (1/4in) shank and are designed to operate with power tools up to a maximum of 4,500/min.  Type: Circular  Diameter: 75 mm  Shaft: 6 mm (1/4in)  Wire: 0.30 mm crimped brass wire  Conforms to ISO 9001 and DIN EN1083-1 and 2.

Wire Brush 75mm x 6mm Shank, 0.30 Brass Wire

This Faithfull crimped steel Wire Cup Brush is designed for light to medium-duty applications, such as cleaning metal surfaces prior to welding or painting. The wire brush is fitted with a 6mm (1/4in) shank and is designed to operate with power tools with a maximum speed of 4,500/min. Type Cup. The FAIWBS50 Wire Cup Brush has the following specifications Face Diameter 50 mm. Shaft 6 mm (1/4 inch). Wire 0.3 mm crimped steel wire. Conforms to ISO 9001. and DIN EN1083-1 and 2.

Wire Cup Brush 50mm x 6mm Shank, 0.30mm Wire FAIWBS50

A flat twist knot high tensile steel wire circular brush compatible with 115 mm (4 1/2in) angle grinders with a M14 x 2 mount. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement.  Conforms to ISO 9001 and DIN EN1083-1 and 2.  Specification:  Type: Circular Diameter: 115 x 12mm face Thread: M14 x 2 Wire: 0.35mm Twist Knot Steel Max. RPM: 12,500

Circular Wire Brush 115 x 12mm M14x2 Bore, 0.35mm Wire

These Faithfull brushes have nylon bristles for use on wood, metal and stone. They have many times the life of a wire brush. Conform to ISO 9001 and DIN EN1083-1 and 2. The 6mm shank enables them to be used with a power tool with a maximum of 4500rpm. The Faithfull FAIWBN65 Nylon cup brush has the following dimensions Size 65mm diameter x 6mm shaft x 1.5mm bristle.

Nylon Cup Brush 65mm x 6mm Shank FAIWBN65

This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to medium-duty applications.  Suitable for use in industrial power tools at higher speeds.    The FAIWBS25E Wire End Brush has the following specifications:  Type: Flat End.  Face Diameter: 25 mm.  Shaft: 6 mm (1/4 inch).  Wire: 0.3 mm crimped steel.  Conforms to ISO 9001. and DIN EN1083-1 and 2.

Wire End Brush 25mm Flat End

Faithfull Conical Knot Brush with high tensile steel wire. Ideal for work in hard-to-reach places such as edges or corners. Suitable for the removal of slag, rust, scale or even dried cement.  Max. Cutting Speed: 12,500 rpm. Diameter: 100 mm  Thread: M14 x 2  Wire: 0.5 mm twist knot steel  Conforms to ISO 9001. and DIN EN1083-1 and 2

Conical Wire Brush 100mm M14x2 Bore, 0.50mm Wire

FAITEXT86 is a heavy-duty textured brush with rubber bristles for creating a stippling effect and other patterns associated with textured coating. Will wash out easily under cold water immediately after use. Size 200 x 150mm (8in x 6in)

Texturing Brush 200 x 150mm (8 x 6in) FAITEXT86

A selection of wire wheels of assorted sizes and shapes, with 1/4in shanks to suit most mains and cordless drills. They are ideal for preparing metal surfaces prior to painting, rust removal, decarbonising motor engines and cleaning of garden and contractor tools. 36 pieces. 18 x 50mm Cup Brushes. 6 x 50mm Circular Brushes. 6 x 65mm Circular Brushes. 6 x 75mm Circular Brushes. Although the wheels are supplied in a bulk of 20, your Faithfull stockist may be able to supply any individual wheel to the purchaser's choice. Not suitable for use in die grinders or high-speed air tools.

Wire Brush Assortment 36 Piece FAIWBA36

The Faithfull Flat Twist Knot Wire Brush is compatible with 115mm (4.1/2in) angle grinders with a M14 x 2 mount. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement. Perfect for use on stainless steel. Standard wire brushes when used on stainless steel can contaminate and cause the material to rust. Conforms to ISO 9001, DIN EN 1083-1 and 2. Specification Diameter 115 x 12mm face Thread M14 x 2 Wire Twist Knot Stainless Steel Grade 304, 0.35mm

Flat Twist Knot Wire Brush 115 x 12mm M14x2 Bore, 0.35mm Stainless Steel Wire FAIWBCT115S

This Faithfull Wire Cup Brush has been designed for use with angle grinders that have a compatible thread. Suitable for industrial use and more specialist applications. Twist knot wire brushes are suited to heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Perfect for use on stainless steel. When standard wire brushes are used on stainless steel they can contaminate the material and cause rust. Conforms to ISO 9001, DIN EN 1083-1 and 2. Specification Diameter 65mm Thread M14 x 2 Wire Twist Knot Stainless Steel Grade 304, 0.50mm

Wire Cup Brush Twist Knot 65mm M14x2, 0.50mm Stainless Steel Wire FAIWBT65S

This Faithfull Wire Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. It can be used in industrial power tools at higher speeds. Type Cup Maximum speed 12,000/min. Face diameter 70 mm x 25 mm Shaft 6 mm (1/4in) Wire 0.3 mm Stainless steel Conforms to ISO 9001. and DIN EN1083-1 and 2

Wire Brush Shaft Mounted 70mm x 25mm, 0.30mm Wire FAIWBSI70

Faithfull Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitable for industrial use and more specialist applications. Face Diameter 100mm Thread M14 x 2 Wire 0.5mm Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 8500

Wire Cup Brush Twist Knot 100mm M14x2, 0.50mm Steel Wire FAIWBT100

The Faithfull Boiler and Flue Brush Set is ideal for cleaning flues and boilers where access is restricted. Each brush features an 80mm long spiral of nylon bristles attached to a strong, flexible, twisted wire loop handle measuring 500mm. This set contains 1 x Round Brush & Oslash16mm 1 x Round Brush & Oslash50mm 1 x Flat Brush 50 x 20mm

Boiler and Flue Brush Set, 3 Piece FAIBRUSHFLUE

Faithfull X-LOCK Conical Wire Brush is for heavy-duty applications. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement from welds, edges and grooves. For use on stainless steel surfaces, aluminium and non-ferrous metal surfaces. Using standard wire brushes on stainless steel can contaminate and cause the material to rust.

Featuring the X-LOCK quick change system, ensuring a fast, reliable and effective one click change between tools when used with a compatible angle grinder.

Specifications:

Wire Type: Twist Knot Stainless Steel (304) .
Diameter: 115mm.
Fitting: X-LOCK.
Wire Size: 0.5mm.
Max. RPM: 12500.

Technical Specs
Wire Type: Twist Knot Stainless Steel (304) 
Diameter: 115mm
Fitting: X-LOCK
Wire Size: 0.5mm
Max. RPM: 12500

X-Lock Conical Wire Brush 115mm M14x2, 0. 50mm Stainless Steel Wire

Faithfull X-LOCK Conical Wire Brush is used for heavy-duty applications. Twist knot brushes are suitable for the removal of slag, rust, scale or even dried cement from welds, edges and grooves. For use on steel surfaces, aluminium and non-ferrous metal surfaces.

Featuring the X-LOCK quick change system, ensuring a fast, reliable and effective one click change between tools when used with a compatible angle grinder.

Specifications:

Wire Type: Twist Knot Steel.
Diameter: 115mm.
Fitting: X-LOCK.
Wire Size: 0.5mm.
Max. RPM: 12500.

Technical Specs
Wire Type: Twist Knot Steel
Diameter: 115mm
Fitting: X-LOCK
Wire Size: 0.5mm
Max. RPM: 12500

Browse our original Faithfull products in Wire Wheels & Brushes

We suggest upgrading to Chrome