Brand

Rating

Price

Special Offers

Colour

Type

Material

Height

Features

Emergency Equipment - Free UK Delivery Over £25 - Buy Online | Zoro

Commercial Specification Heat Trace Safety Shower - HTS-1
220 Volts at 20 Watts Per Metre

The HTS-1 is a traced heat (commercial electrics) decontamination shower that is protected against freezing by means of trace heat cabling and an insulated jacket which gives protection down to -25°C. The water supply is via a bottom feed supply and the shower head is activated by high visibility yellow pull handle which opens the “stay-open” valve, which means that the shower will continue to operate until the valve is closed by pushing the handle back into the “up” position.

Options include:

•	Bullhorn eye wash
•	Galvanised or stainless steel waste water collection sumps
•	Galvanised or stainless steel cubicles with collections sumps
•	Commercial electrics PIR lighting
•	Commercial electrics Alarm/sounder with proximity switch
•	ATEX Zone 1 Lighting
•	ATEX Trace heating
•	ATEX Zone 1 Alarm/sounder with proximity switch

Suitable anchors must be used to ensure that the unit is rigid and properly secured before being used. If desired or required, additional straps or braces can be used to secure any unit. (BE SURE NOT TO DRILL OR SCREW ANYTHING INTO THE OUTER PLASTIC SHELL)

Heat Trace: 220 volts @ 20 watts per metre; self regulating

Heat Trace Shower with Galvanised Pipework & Standard Trace Heating comes with GRP Jacket

Combination Shower With ABS Plastic Shower Head & Basin - FSCS

Manufactured using galvanised pipe work which is protected with an anti-corrosive Polyamide 11 high visibility yellow plastic coating to give good resistance to acids, bases, seawater and oils, all fittings are brass and the 250mmØ shower head and eye wash bowl are manufactured from ABS reinforced plastic. The eye wash has two high flow, aerated low pressure outlets fitted with automatic opening dust covers.

This combination safety shower and eye wash has been designed to meet and exceed the internationally recognised standards: EN15154 parts 1 & 2, DIN12899.3 and ANSI Z358.1.

Free Standing Combination Shower and Eyewash Basin - Standard

Pedestal Mounted Emergency Eye Wash - PMEW 
ABS Plastic

The galvanised steel pipe work and brass fittings are protected with an anti-corrosive Polyamide 11 high visibility yellow plastic coating which provides good resistance to acids, bases, seawater and oils.

The eye wash assembly and eye wash bowl are manufactured from ABS reinforced plastic and the bowl is fitted with two high flow, aerated low pressure outlets fitted with automatic opening dust covers.

This pedestal mounted eye wash has been designed to meet and exceed the internationally recognised standards: EN15154 parts 1 & 2, DIN12899.3 and ANSI Z358.1.

Pedestal Mounted Eyewash Basin - Standard

Foot Treadle - FTFSS 
For Use With Product FSCS

This treadle plate is designed for use with the combination shower FSCS. Simple to install and use the foot treadle provides hands free activation of the shower unit.

Manufactured from steel the treadle which is protected with an anti-corrosive polyamide 11 high visibility yellow plastic coating to give good resistance to acids, bases, seawater and oils.

Foot Treadle for Use with Fscs Free Standing Showers

Combination Shower With Self Drain Platform - CPSE

Manufactured using galvanised pipe work which is protected with an anti-corrosive Polyamide 11 high visibility yellow plastic coating to give good resistance to acids, bases, seawater and oils, all fittings are brass and the 250mmØ shower head and eye wash bowl are manufactured from ABS reinforced plastic. The eye wash has two high flow, aerated low pressure outlets fitted with automatic opening dust covers.

This combination safety shower and eye wash is fitted with an automatic drain system to remove residual water after use and has been designed to meet and exceed the internationally recognised standards: EN15154 parts 1 & 2, DIN12899.3 and ANSI Z358.1.

Platform Shower & Eyewash - Separate Operation

Self Drain Combination Shower - FSCS-SD 
76 x 25 x 20cm

Manufactured using galvanised pipe work which is protected with an anti-corrosive Polyamide 11 high visibility yellow plastic coating to give good resistance to acids, bases, seawater and oils, all fittings are brass and the 250mmØ shower head and eyewash bowl are manufactured from ABS reinforced plastic. The eye wash has two high flow, aerated low pressure outlets fitted with automatic opening dust covers.

This combination safety shower and eye wash is fitted with an automatic drain system to remove residual water after use and has been designed to meet and exceed the internationally recognised standards: EN15154 parts 1 & 2, DIN12899.3 and ANSI Z358.1.

Free Standing Combination Shower & Eyewash Basin Independent Operation & Self Draining

Wall Mounted Stainless Steel Emergency Shower Head - WMS-SS 
80 x 27 x 13cm

Manufactured using stainless steel pipe work and fittings; including the 250mmØ shower head, this safety shower is ideal for harsh environments and industries such as food and pharmaceutical. 

This wall mounted safety shower has been designed to meet and exceed the internationally recognised standards: EN15154 parts 1 & 2, DIN12899.3 and ANSI Z358.1.

Wall Mounted Shower - Stainless Steel

Ceiling Mounted Emergency Shower- CMS 
With ABS Shower Head

Manufactured using galvanised pipe work which is protected with an anti-corrosive Polyamide 11 high visibility yellow plastic coating to give good resistance to acids, bases, seawater and oils, all fittings and elbow joints are brass and the 250mmØ shower head is manufactured from ABS reinforced plastic. 

This ceiling mounted safety shower has been designed to meet and exceed the internationally recognised standards: EN15154 parts 1 & 2, DIN12899.3 and ANSI Z358.1.

Ceiling Mounted Shower - Standard

Wall Mounted Emergency Eye Wash - WMEW-SS 
51 x 36 x 13cm

The eye wash assembly, all fittings and the eye wash bowl are manufactured from stainless steel and the bowl is fitted with two high flow aerated low pressure outlets fitted with automatic opening dust covers. 

This wall mounted eye wash has been designed to meet and exceed the internationally recognised standards: EN15154 parts 1 & 2, DIN12899.3 and ANSI Z358.1.

Wall Mounted Eyewash Basin - Stainless Steel

Pedestal Mounted Emergency Eye Wash - PMEW-DC 
Dual Control

The galvanised steel pipe work and brass fittings are protected with an anti-corrosive polyamide 11 high visibility yellow plastic coating which provides good resistance to acids, bases, seawater and oils.

The eye wash assembly and eye wash bowl are manufactured from ABS reinforced plastic and the bowl is fitted with two high flow, aerated low pressure outlets fitted with automatic opening dust covers. 

Activation of this eye wash is by means of either pushing the hand paddle or standing on the foot treadle.

This pedestal mounted dual control eye wash has been designed to meet and exceed the internationally recognised standards: EN15154 parts 1 & 2, DIN12899.3 and ANSI Z358.1.

Browse our original Empteezy Ltd products in Emergency Equipment

We suggest upgrading to Chrome