LeadTime

Brand

Rating

Price

Special Offers

Drill Dia. (mm)

Size

Combined Drill & Countersinks - Free UK Delivery Over £25 - Buy Online | Zoro

SNAP/CS Trend Snappy Countersink with heat treated tool steel countersink with a HSS drill. Adjustable for different length screws and can produce counterbored hole for woodplugs. The drill produce pilot holes only.

SNAP/CS/10: 
D= 3/8 inch (9.5 mm)
D2= 1/8 inch (3.25 mm)
Shank Diameter= 1/4 inch HEX
Screw size: Softwood (S/W)= No.10, Hardwood (H/W)= No. 8

SNAP/CS/12
D= 1/2 inch (12.7 mm)
D2= 9/64 inch (3.5 mm)
Shank Diameter= 1/4 inch HEX
Screw size: S/W=No.12, H/W=No.10

SNAP/CS/8
D= 3/8 inch (9.5 mm)
D2= 7/64 inch (2.75 mm)
Shank Diameter= 1/4 inch HEX
Screw size: S/W=No.8, H/W=No.6

Self-centering drill for the accurate drilling of pilot holes for fittings such as hinges to ensure exact alignment. It can be easily dismantled for cleaning and are supplied with a HSS drill bit.

They are designed to drill and countersink simultaneously, a wide variety of materials.

• Supplied with a HSS slow spiral drill bit.

• Fully adjustable, a hex key is supplied.

• The TCT version is used for plywood, particle boards and plastics (abrasive).

• Use at drilling speeds only.

• Not suitable for ferrous or non ferrous metals.

• Please ensure drill flutes are aligned with flutes of countersink.

The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.

SNAP/CS
1/4” hex shanks with ball retainer recess for use in quick release bit adaptors or 3-jaw chucks. Heat treated tool steel countersink and HSS drill. Adjustable for different length screws and can produce a counterbored hole for standard size wood plugs. The drill produces pilot holes only.

SNAP/CS Trend Snappy Countersink with heat treated tool steel countersink with a HSS drill. Adjustable for different length screws and can produce counterbored hole for woodplugs. The drill produce pilot holes only.

SNAP/CS/10: 
D= 3/8 inch (9.5 mm)
D2= 1/8 inch (3.25 mm)
Shank Diameter= 1/4 inch HEX
Screw size: Softwood (S/W)= No.10, Hardwood (H/W)= No. 8

SNAP/CS/12
D= 1/2 inch (12.7 mm)
D2= 9/64 inch (3.5 mm)
Shank Diameter= 1/4 inch HEX
Screw size: S/W=No.12, H/W=No.10

SNAP/CS/8
D= 3/8 inch (9.5 mm)
D2= 7/64 inch (2.75 mm)
Shank Diameter= 1/4 inch HEX
Screw size: S/W=No.8, H/W=No.6

SNAP/CS/10 HSS Countersink 1/8" Drill

Snap/Dbg/9 Centre Guide 9/64"DRILL

They are designed to drill and countersink simultaneously, a wide variety of materials.

• Supplied with a HSS slow spiral drill bit.

• Fully adjustable, a hex key is supplied.

• The TCT version is used for plywood, particle boards and plastics (abrasive).

• Use at drilling speeds only.

• Not suitable for ferrous or non ferrous metals.

• Please ensure drill flutes are aligned with flutes of countersink.

6200/6 1/2in Professional TCT Adjustable Drill and Countersink Set 5/32in Pilot

This TCT countersink clamps onto any drill between 3.0mm and 7.2mm in diameter. Recommended for wood and man-made boards. By reversing the countersink on the drill, it can be used as a non-cutting depth stop. Ensures flutes of drill are aligned with flutes of countersink. Do not overtighten screw. 
Not suitable for production applications and not suitable for ferrous and non-ferrous metals.
C= 12 mm; OL= 32 mm; A=45 degrees

UNI/CS TC Universal Countersink

SNAP/CS Trend Snappy Countersink with heat treated tool steel countersink with a HSS drill. Adjustable for different length screws and can produce counterbored hole for woodplugs. The drill produce pilot holes only. Comes with 1x 2.0mm (5/64in) Drill & C/S Size No.4, 1x 2.4mm (3/32in) Drill & C/S Size No.6, 1x 2.8mm (7/64in) Drill & C/S Size. No.8, 1x 3.2mm (1/8in) Drill & C/S Size. No.10 and 1x 3.6mm (9/64in) Drill & C/S Size. No.12.

Snap/Cs/Set HSS Countersink Set 5PC

Heat treated tool steel countersink with a HSS drill.

• Snappy Quick Release Drill System

• Adjustable for different length screws and can produce a counterbored hole for woodplugs.

• The drill produces pilot holes only.

Snap/Cs/6 Snappy Countersink 3/8in (9.5mm) with 3/32in (2.5mm) Pilot Drill 1/4in Hex Shank

Shell style 90º countersink produced from the best grade carbon steel designed to leave a clean cut finish by virtue of their multi-tooth deep ground gullets. Not suitable for abrasive materials or metals. For use with 4 mm drill bit (not included).

620/4WS Countersink TRE6204WS

These combination tools in TCT can be used in abrasive materials.They will drill, countersink and finally counterbore a parallel hole.Designed to receive plug maker group 24.The drill diameter sizes are for a clearance hole only.For use with drilling machines or routers.  Specifications:  T.C.T.1/4in Shank.Woodscrew Size. No.10.Drill Diameter 7/32in.Countersink Diameter. 12mm.Drill Length. 20mm.

62/10 x 1/4 TCT Drill/Countersink/Counterbore

Shell style 90º countersink produced from the best grade carbon steel designed to leave a clean cut finish by virtue of their multi-tooth deep ground gullets. Not suitable for abrasive materials or metals. This TCT Countersink clamps onto any drill between 3 mm and 7.2 mm in diameter. The drill passes through the body of the countersink and is secured by two hexagon bolts which clamp the countersink onto the drill at the required position. Recommended for wood and man made boards. By reversing the countersink on the drill the UNI / CS can be used as a non-cutting depth stop. NOTE- Drills not included.

UNI/CS Countersink TREUNICS

The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits. Drill Size 2.4mm (3/32in). Countersink Size No.6.

SNAP/CS/6 Countersink with 3/32in Drill TRESNAPCS6

The Trend Countersink Set contains five heat treated tool steel countersinks with hex shafts. They are fitted with High Speed Steel drill bits to cover the full range of screw sizes and are self clearing. They are adjustable for different length screws and will produce a 9.5mm (3/8in) or 12.7mm (1/2in) diameter counterbored hole to fit standard woodplugs. Contains 1 x 2.0mm (5/64in) Drill and C/S Size No.4. 1 x 2.4mm (3/32in) Drill and C/S Size No.6. 1 x 2.8mm (7/64in) Drill and C/S Size. No.8. 1 x 3.2mm (1/8in) Drill and C/S Size. No.10. 1 x 3.6mm (9/64in) Drill and C/S Size. No.12. Tungsten carbide tipped version, these tools can be used in abrasive materials such as laminated chipboard. The drills produce pilot holes only.

SNAP/CSTC/SET TCT Countersink Set, 5 Piece TRESNAPCSTCS

Snap/Cs/8 HSS Countersink 7/64" Drill

6200/8HSS
Designed to drill and countersink simultaneously, a wide variety of materials. 

• Supplied with a 3/16in HSS slow spiral drill bit.
• Fully adjustable, a hex key is supplied.
• Use at drilling speeds only.
• Not suitable for ferrous or non ferrous metals.
• Please ensure drill flutes are aligned with flutes of countersink.

Browse our original Trend products in Combined Drill & Countersinks

We suggest upgrading to Chrome