Brand

Rating

Price

Special Offers

Inside Diameter

Width

Operating Temperature Range

Outside Diameter

Product Type

Enclosure

Bolt Hole Centres

Shaft Diameter

Power Transmission & Flow Control - Free UK Delivery Over £25 - Buy Online | Zoro

C3 bearings have an additional internal radial clearance to cope with high speed environments where excess heat is generated.

Rubber Sealed Type: With rubber seals inserted into the outer raceway and in contact with the inner race providing protection against the ingress of moisture, dust and other foreign objects. The seals also retain the pre-filled grease in the bearing. Seals can be easily removed for applications that only require one seal.

Deep groove bearings with Shields (ZZ Type).
We offer a full range of miniature bearings from just 1.5mm shaft size with a variety of outside diameters. All bearings are constructed to the highest standard, providing class-leading durability and reliability. 

Features and Benefits
• Primarily designed for applications where the bearing inner ring rotates 
• Protect from dirt and debris without friction losses
• Temperature resistant - effective from -20 to 120°C

Notes
• Available in a wide range of sizes

Rubber Sealed Type With rubber seals inserted into the outer raceway and in contact with the inner race providing protection against the ingress of moisture, dust and other foreign objects. The seals also retain the pre-filled grease in the bearing. Seals can be easily removed for applications that only require one seal.

The most commonly used and versatile bearing type. Designed for high speeds, highly durable and requiring little maintenance. Close conformity between the balls and the deep raceway grooves handle high speeds, radial loads and axial loads in either direction. Applications: general engineering and manufacturing, transmissions, gearboxes, wheel hubs, gardening and agricultural equipment, pumps etc. Dimensions in accordance with ISO 15:1981.

C3 bearings have an additional internal radial clearance to cope with high speed environments where excess heat is generated.

Shielded Type: With metal shields inserted into the outer raceway, these fit in closely to the inner race providing moderate protection against mechanical damage, and against the ingress of moisture, dust and other foreign objects. The shields also retain the pre-filled grease in the bearing. Shields can be easily removed for applications that only require one shield.

Flanged Housing Units.
Made of grey cast iron with four fixing holes.


Housed Bearing Units are one of the most effective and easiest solutions to accommodate misalignment. Units below consist of housing and insert. A wide range is available including Imperial sizes. Please ask for further information.

Shielded Type 
With metal shields inserted into the outer raceway, these fit in closely to the inner race providing moderate protection against mechanical damage, and against the ingress of moisture, dust and other foreign objects. The shields also retain the pre-filled grease in the bearing. 
Shields can be easily removed for applications that only require one shield. 

C3 Bearings have an internal clearance to cope with high speed environments where excess heat is generated.

C3 bearings have an additional internal radial clearance to cope with high speed environments where excess heat is generated.

Open Type: Without seals to allow for the free circulation of either oil or grease.

Shielded Type With metal shields inserted into the outer raceway, these fit in closely to the inner race providing moderate protection against mechanical damage, and against the ingress of moisture, dust and other foreign objects. The shields also retain the pre-filled grease in the bearing. Shields can be easily removed for applications that only  require one shield.

The most commonly used and versatile bearing type. Designed for high speeds, highly durable and requiring little maintenance. Close conformity between the balls and the deep raceway grooves handle high speeds, radial loads and axial loads in either direction. Applications: general engineering and manufacturing, transmissions, gearboxes, wheel hubs, gardening and agricultural equipment, pumps etc. Dimensions in accordance with ISO 15:1981.

Open Type: Without seals to allow for the freecirculation of either oil or grease, used in gearboxes and other assemblies where a lubricant is already present. 

The most commonly used and versatile bearing type. Designed for high speeds, highly durable and requiring little maintenance. Close conformity between the balls and the deep raceway grooves handle high speeds, radial loads and axial loads in either direction.
Applications: general engineering and manufacturing, transmissions, gearboxes, wheel hubs, gardening and agricultural equipment, pumps etc. Dimensions in accordance with ISO 15:1981.

Open Type. 
We offer a full range of miniature bearings from just 1.5mm shaft size with a variety of outside diameters. Please ask your local service centre for more details.

NTN single row deep groove ball bearings with nitrile rubber seals providing protection against the ingress of moisture, dust and other foreign objects. The seals also retain the pre-filled grease in the bearing. Designed for high speeds, highly durable and requiring little maintenance.

2200 & 2300 Series self-aligning ball bearings are double row with a concave raceway to allow approximately 4° of misalignment. These are cylindrical type but are also available with seals & taper bore for use with adaptor sleeves.

With a spherical raceway in the outer ring, self-aligning ball bearings can compensate for installation errors or shaft misalignment. Clearance is standardised 
(ISO 5753).

The spherical race in the outer ring allows angular displacement. It has good ability to withstand radial loads. It’s design, however, means that it can only accept very low axial loads. These bearings are pre-greased but seals limit angular travel possibilities to 1/20. Basic loads are the same as the Series 12 and 13 bearings of the same diameter, as they have the same internal design definition. The misalignment angle must nevertheless be limited in order to remain within values compatible with the sealing system used, the permissible misalignment is limited to 0.5°.

With metal shields inserted into the outer raceway, these fit in closely to the inner race providing moderate protection against mechanical damage, and against the ingress of moisture, dust and other foreign objects. The shields also retain the pre-filled grease in the bearing. Shields can be easily removed for applications that only require one shield.

6005-EEC3-J30 Deep Groove Ball Bearing

We offer a full range of miniature bearings from just 1.5mm shaft size with a variety of outside diameters. Please ask your local service centre for more details.
With Shields (ZZ Type)

607-2Z Deep Groove Ball Bearing

6205-EE Deep Groove Ball Bearing

With rubber seals inserted into the outer raceway and in contact with the inner race providing protection against the ingress of moisture, dust and other foreign objects. The seals also retain the pre-filled grease in the bearing. Seals can be easily removed for applications that only require one seal.

6202-ZZC3-J30 Deep Groove Ball Bearing

Cast iron self lube units with bolt holes.

UCFE206 30MM Metric Housed Bearing

6206-ZZ-C3 Deep Groove Bearing

Without seals to allow for the free circulation of either oil or grease.

6207-C3-J30 Deep Groove Ball Bearing

Shielded Type With metal shields inserted into the outer raceway, these fit in closely to the inner race providing moderate protection against mechanical damage, and against the ingress of moisture, dust and other foreign objects. The shields also retain the pre-filled grease in the bearing. Shields can be easily removed for applications that only  require one shield.

The most commonly used and versatile bearing type. Designed for high speeds, highly durable and requiring little maintenance. Close conformity between the balls and the deep raceway grooves handle high speeds, radial loads and axial loads in either direction. Applications: general engineering and manufacturing, transmissions, gearboxes, wheel hubs, gardening and agricultural equipment, pumps etc. Dimensions in accordance with ISO 15:1981.

6008-ZZ Deep Groove Ball Bearing

6307 Deep Groove Ball Bearing

We offer a full range of miniature bearings from just 1.5mm shaft size with a variety of outside diameters. Please ask your local service centre for more details.
Open Type

608 Deep Groove Ball Bearing

6203-LL Deep Groove Bearing

2203-G15 Self Aligning Ball Bearing

Rubber Sealed Type With rubber seals inserted into the outer raceway and in contact with the inner race providing protection against the ingress of moisture, dust and other foreign objects. The seals also retain the pre-filled grease in the bearing. Seals can be easily removed for applications that only require one seal.

The most commonly used and versatile bearing type. Designed for high speeds, highly durable and requiring little maintenance. Close conformity between the balls and the deep raceway grooves handle high speeds, radial loads and axial loads in either direction. Applications: general engineering and manufacturing, transmissions, gearboxes, wheel hubs, gardening and agricultural equipment, pumps etc. Dimensions in accordance with ISO 15:1981.

6015-EE Deep Groove Ball Bearing

With a spherical raceway in the outer ring, self-aligning ball bearings can compensate for installation errors or shaft misalignment. Clearance is standardised 
(ISO 5753).

Browse our original NTN SNR products in Power Transmission & Flow Control

We suggest upgrading to Chrome