Brand

Rating

Price

Special Offers

Clamping Components - Free UK Delivery Over £25 - Buy Online | Zoro

CC12 Adjustable Clamps offer a low profile design that are specially built to keep surfaces clear for machining and suitable for use with rough or finished parts.

Features and Benefits
• Low profile clamp that keeps top surfaces clear for machining
• Ideal for rough or finished parts
• Black oxide finish for increased durability

Specifications
• Material: Medium carbon steel
• Hardness: Jaw only: HRC 38
• Surface finish: Black Oxide
• Jaws: Surface treated with high frequency quenching

Typical Applications
• Machining 
• Metal

CC25 - Step Clamp
Material: Medium Carbon Steel.
Hardness: HRC 32 - 38.
Surface Finish: Black Oxide.

SC11A - Screw Jack 
Material: Medium Carbon Steel.
Hardness: HRC 40.
Surface Finish: Black Oxide.

CC08 - Swing Clamp
A small clamp with good holding power, ideal for tight spaces, full swing away feature permits easy part loading.
Material: Case Hardened Steel.
Hardness: HRC 38 - 42.
Surface Finish: Black Oxide.

CC24 - Eccentric Cam Lock
Material: Medium Carbon Steel.
Hardness: HRC 35.
Surface Finish: Black Oxide.

CC13 - Adjustable Stepped Clamp
Low profile clamp for holding thin parts and keeping top surfaces clear for machining.
Material: Medium Carbon Steel.
Heat Treated To: hrc 38.
Surface Finish: Black Oxide.
Jaws: Surface treated with high frequency quenching.

CC03 - Swan Necked Clamp
Low profile design helps eliminate cutter interference.
Material: Medium Carbon Steel.
Heat Treated To:  HRC 32 - 38.
Surface Finish: Black Oxide.

Material: medium carbon steel.
Hardness: HRC 32 - 38.
Surface finish: black oxide.

CC01 - U-Clamp
Open end permits quick and easy installation.
Material: Medium Carbon Steel.
Heat Treated To:  HRC 32 - 38.
Surface Finish: Black Oxide.

CC21 - Swivel Rack Clamp
Material: Medium Carbon Steel/Steel Forging.
Surface Finish: Black Oxide.

CC20 - Forged Swivel Clamp
Material: Medium Carbon Steel/Steel Forging.
Heat Treated To: 32 - 38°.
Surface Finish: Black Oxide.

CC05 - Plain Clamp
Material: Medium Carbon Steel.
Heat Treated To: HRC 32 - 38.
Surface Finish: Black Oxide.

CC06 - Tapped End Plain Clamp
For use with various knobs, jack screws, clamps and pads.
Material: Medium Carbon Steel.
Heat Treated To: HRC 32 - 38.
Surface Finish: Black Oxide.

Material:  Medium Carbon Steel. Hardness:  hrc42. Surface Finish:  Manganese Phosphate. Jaws: Surface treated with high frequency quenching.

CC02 - Bore Clamp
The cylindrical pin minimises the contact area. This clamp is for clamping inside horizontal bores and onto concave surfaces.
Material: Medium Carbon Steel.
Heat Treated To:  HR C32 - 38.
Surface Finish: Black Oxide.

SC10 - Extension Pillar
Material: Medium Carbon Steel.
Hardness: HRC 40.
Surface Finish: Black Oxide.

SC04 - Location Collar
Material: Medium Carbon Steel.
Hardness: HRC 40.
Surface Finish: Black Oxide.

CC12 - Adjustable Clamp
Low profile clamp that keeps top surfaces clear for machining. Ideal for rough or finished parts.
Material: Medium Carbon Steel.
Hardness: Jaw Only: HRC 38.
Surface Finish: Black Oxide.
Jaws: Surface treated with high frequency quenching.

CC12 105 x 35 x 30mm Ground Adjustable Clamp

CC25 - Step Clamp
Material: Medium Carbon Steel.
Hardness: HRC 32 - 38.
Surface Finish: Black Oxide.

CC2516150 38 x 150mm M16 Step Clamp

SC11A - Screw Jack 
Material: Medium Carbon Steel.
Hardness: HRC 40.
Surface Finish: Black Oxide.

SC11A 32 x 40mm Screw Jack

CC08 - Swing Clamp
A small clamp with good holding power, ideal for tight spaces, full swing away feature permits easy part loading.
Material: Case Hardened Steel.
Hardness: HRC 38 - 42.
Surface Finish: Black Oxide.

CC08 30mm Swing Clamp

CC24 - Eccentric Cam Lock
Material: Medium Carbon Steel.
Hardness: HRC 35.
Surface Finish: Black Oxide.

CC240416 M16 x 38mm Eccentric Cam Lock

CC13 - Adjustable Stepped Clamp
Low profile clamp for holding thin parts and keeping top surfaces clear for machining.
Material: Medium Carbon Steel.
Heat Treated To: hrc 38.
Surface Finish: Black Oxide.
Jaws: Surface treated with high frequency quenching.

CC13 72 x 25 x 8mm Serrated Adjustable Step Clamp

CC03 - Swan Necked Clamp
Low profile design helps eliminate cutter interference.
Material: Medium Carbon Steel.
Heat Treated To:  HRC 32 - 38.
Surface Finish: Black Oxide.

CC03 120mm Swan Neck Clamp

CC07
Material: medium carbon steel.
Hardness: HRC 32 - 38.
Surface finish: black oxide.

CC07 80 x 30mm Slotted End Clamp

CC01 - U-Clamp
Open end permits quick and easy installation.
Material: Medium Carbon Steel.
Heat Treated To:  HRC 32 - 38.
Surface Finish: Black Oxide.

CC01 100mm U-clamp

CC04 - Tapped End U-Clamp
Open end design permits easy assembly.
Material: Medium Carbon Steel.
Heat Treated To: HRC 32 - 38.
Surface Finish: Black Oxide.

CC04 150 x 50mm Tapped End U-clamp

CC21 - Swivel Rack Clamp
Material: Medium Carbon Steel/Steel Forging.
Surface Finish: Black Oxide.

CC210216 M16 x 150mm Adjustable 'S' Clamp

CC19 - Forged Swivel Clamp
Material: Medium Carbon Steel/Steel Forging.
Heat Treated To: 32 - 38°.
Surface Finish: Black Oxide.

CC19NC50 M12 x 125mm Swivel 'S' Clamp

CC20 - Forged Swivel Clamp
Material: Medium Carbon Steel/Steel Forging.
Heat Treated To: 32 - 38°.
Surface Finish: Black Oxide.

CC20NC6 M16 x 150mm 'S' Clamp

CC05 - Plain Clamp
Material: Medium Carbon Steel.
Heat Treated To: HRC 32 - 38.
Surface Finish: Black Oxide.

CC05 125 x 38mm Plain Clamp

CC06 - Tapped End Plain Clamp
For use with various knobs, jack screws, clamps and pads.
Material: Medium Carbon Steel.
Heat Treated To: HRC 32 - 38.
Surface Finish: Black Oxide.

CC06 150 x 50mm Tapped End Plain Clamp

CC13 105 x 35 x 10mm Ground Adjustable Step Clamp

CC02 - Bore Clamp
The cylindrical pin minimises the contact area. This clamp is for clamping inside horizontal bores and onto concave surfaces.
Material: Medium Carbon Steel.
Heat Treated To:  HR C32 - 38.
Surface Finish: Black Oxide.

CC02 150 x 38mm Bore Clamp

SC10 - Extension Pillar
Material: Medium Carbon Steel.
Hardness: HRC 40.
Surface Finish: Black Oxide.

SC10 M16 x 50mm Extension Pillar

SC04 - Location Collar
Material: Medium Carbon Steel.
Hardness: HRC 40.
Surface Finish: Black Oxide.

Browse our original Indexa products in Clamping Components

We suggest upgrading to Chrome