Brand

Rating

Price

Special Offers

Type

Solder Type

Size

Standards Met

Fluxes - Free UK Delivery Over £25 - Buy Online | Zoro

Effective flux paste for engineering, plumbing and sheet metal soldering. Residue can be removed with warm detergent solution. Suitable for use with lead and lead free soldering.

Features and Benefits
• Water soluble for easy cleaning after use
• Suitable for lead and lead free soldering for versatility of use

These fluxes are suitable for low temp soldering. Working range 550 - 800°C. The powder is mixed with water to form a paste. Residue is removed in hot water.

Features and Benefits
• Residue can be removed using hot water for easy clean up
• Makes flux paste quickly just by adding water
• Available in two sizes depending on your needs

Typical Applications
• Soldering

Standards
• Complies with DIN 8511 FSH-2 and EN1045 FH10

Soldering fluid No.3 for clean, positive joint preparation. For tinned materials and copper. Water soluble. High activity flux.

Features and Benefits
• Fast acting to save you time and ensure quality hold
• Economical solution to fasten joints in place
• Available in various sizes to suit your needs

Suited for varying welding applications depending on your choice, Sif® welding flux is ideal for preventing oxidation when welding as well as for cleaning materials as you weld. Sif®'s Aluminium Flux is designed for gas welding of aluminium and aluminium alloys, the Bronze Flux is suited for general purpose brazing flux for silicon bronze rods and Sif®s Silver Solder Flux is for silver brazing operation. 600°C to 800°C.

Features and Benefits
• Available in a variety of specifications to suit your requirements
• Supplied in a resealable tub to allow you to keep the product protected when not in use

Typical Applications
• Brazing
• Gas Welding

Bakers Fluid No.3 is a specially formulated liquid flux ideal for soldering and tinning of copper and tinned materials. Easy to apply. Fast acting and economical in use, ensuring sound strong joints.

Cougartron CGT-550 weld cleaning and polishing fluid is used for cleaning, polishing, and passivating stainless steel welds and surfaces after welding and fabrication.

The CGT-550 is our most effective and powerful fluid that can be used for all types of TIG and MIG welds.

Instructions
Dip the weld cleaning brush into the weld cleaning fluid CGT-550
Clean the weld with a circular motion until the desired result
Wipe away any excess fluid residue from the treated surface
Apply neutralising fluid on the cleaned area
Wipe away with a clean cloth

Important: Weld cleaning brush needs to be wet at all times for optimal results. Therefore, dip the brush frequently into the weld cleaning fluid during the cleaning or electropolishing process.

CGT-N5 is the new neutralising fluid specially developed strong ready-to-use formula for all stainless steel surfaces.

CGT-N5 will successfully remove acid residue from steel surfaces and prevent the (re) appearance of annoying white marks after weld cleaning, electropolishing, or marking process.

The fluid is water-based and does not contain solvents or phosphorus.

Instructions
Dip the weld cleaning brush into the weld cleaning fluid
Clean the weld with a circular motion until the desired result
Wipe away any excess fluid residue from the treated surface
Apply neutralising fluid CGT-N5 on the cleaned area
Wipe away with a clean cloth

Important: Never spray neutralising fluid on the surface that still has weld cleaning fluid residue to prevent the appearance of white stains. Always use a clean cloth for wiping away the neutralising fluid

CGT-350 is a mild but effective fluid for stainless steel weld cleaning and passivation.

CGT-350 can be used on light and dark TIG and light MIG welds.

Thanks to its specific chemical non-hazardous formula, CGT-350 can be transported by air.

Note: CGT-350 is not suitable for electropolishing – This activity requires the use of our Cougartron CGT-550 weld cleaning and polishing fluid – WELC3048

Instructions
Dip the weld cleaning brush into the weld cleaning fluid CGT-350
Clean the weld with a circular motion until the desired result
 Wipe away any excess fluid residue from the treated surface
Apply neutralising fluid on the cleaned area
Wipe away with a clean cloth

Important: Weld cleaning brush needs to be wet at all times for optimal results. Therefore, dip the brush frequently into the weld cleaning fluid during the cleaning or electropolishing process.

For engineering, plumbing and sheet metal soldering. Residue can be removed with warm detergent solution.

Fluxite Paste 450g

The industry standard silver brazing flux. Working range 550° - 800°C. Suitable for use with the lowest melting point silver brazing alloys. Complies with DIN 8511 FSH-2.

Easyflo Flux Powder 500g

For clean, positive joint preparation. For tinned materials and copper.

Bakers Soldering Flux Fluid Grade 3 250ml

For the treatment of corrosion on stainless steel and nickel alloys prior to welding. Brush not supplied.

Pickling Paste Jar ANTOX71E 2kg

For gas welding. 

Sif Aluminium Flux
For gas welding of aluminium and aluminium alloys.
Sif Bronze Flux
General purpose brazing flux for silicon bronze rods.
Sif Silver Solder Flux
For silver brazing operation.

SIFBRONZE Flux 500g

EASY-FLO™ High Temperature Grade Flux Paste is a silver brazing flux designed for optimal performance under extended heating and at elevated temperature ranges. Ideal for common engineering metals (excluding aluminium), it ensures 'temperature-time stability' and resistance to overheating. 

Features and Benefits
• Prevents oxidation for optimal results
• Facilitates efficient heat transfer for strong metal bonds
• Recommended for vertical holds on components

Typical Applications
• Metal fabrication 
• HVAC systems
• High-temperature brazing tasks

Easyflo Hi-Temp Flux Paste 500gm

Fryolux solder paint is ideally suited to tinning and sweating a variety of materials. The paint should be applied by brush or spray to clean dry surfaces which are in a cold state.

Standard Fryolux Paint 40/60 500g

HQ designed to allow strong metallurgical joints in sheet metals and plumbing. Particularly for tin, copper and lead-free soldering.

Powerflow Flux 350g

Tip tinner is a speedy and effective product for cleaning and re-tinning de-wetted soldering irons that cannot be re-tinned by sponges, pads or rosin cored solder wire.

In simple terms - If your soldering iron tip won't take solder, try using tip tinner to restore life back into your tip.

Simply wipe your soldering iron tip across the surface of the product, then apply solder. Give your tip a wipe on a sponge, and it should then be ready for use again.

• Suitable for use with all Antex soldering irons / tips.
• RE- energizes your soldering bit.

XM000Y0 - Tip Tinner/Cleaner - 15g

Convenient and economical to use, applied easily by brush, swab or spray, to cold surfaces and then heated to melt the solder and make the joints. Only a thin coat is needed and, as the solder and flux are both applied at once, it saves time. Used in a myriad of industrial jointing applications and a firm favourite with modellers, Fryolux is a uniform mixture of finely powdered tin/lead solder and zinc chloride activated flux. It has a creamy consistency and is reported to be ideal for pre-tinning, solder coating and soft solder assembly. Size 125g.

Fryolux Solder Paint T1333 Sn40/Pb60 125g FRY51930

1 x LA-CO Regular Soldering Flux, Size 60g

22103 Regular Soldering Flux 60g

Tenacity 4A Silver Brazing Powder Flux 500g

Frysol A8 is a unique blend of chemicals developed to enable efficient soft soldering to metals such as stainless steels. These metals are difficult to solder due to the tough chromic oxide layer, which is present on the surface of the steel alloys. The free acid within Frysol A8 flux removes these oxides, thus producing a clean surface for the solder to wet.
This product has a shelf life of 36 months from the date of manufacture.

Frysol A8 Stainless Steel Flux 1L

Fernox Powerflow Flux Paste 350g The ideal flux for lead free solder

Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.

Powerflow Flux Paste 350g

Fernox Powerflow Flux Paste 100g Removes residue of any flux product

Powerflow Flux Paste 100g

La-Co Regular Flux Paste 475g Super detergent action cleans as it solders Water soluble for faster flushing from pipe line Non-acid, non-toxic, lead free Contains no zinc chloride For use on most metal types Meets Mil. Spec. Mil-F-4995 Type II

Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.

Regular Flux Paste 475g

La-Co Regular Flux Paste (With Brush) 125g Super detergent action cleans as it solders Water soluble for faster flushing from pipe line Non-acid, non-toxic, lead free Contains no zinc chloride For use on most metal types Meets Mil. Spec. Mil-F-4995 Type II

Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.

Regular Flux Paste (with Brush) 125g

Renolit Copper 500gm

Soldering Flux acts as a chemical cleaning agent to remove impurities from joint surfaces when soldering, ensuring a better joint. It has a non-acidic, non-toxic formula, offering fitters the benefits of savings, safety and certainty. WRAS (The Water Regulations Advisory Scheme) approved. Products compliant with this approval are accepted by all water suppliers in the UK. 1 x LA-CO Regular Soldering Flux, Size 125g Brush In Cap

22195 Regular Soldering Flux Brush In Cap 125g LAC22195

Bakers Fluid No.3 is a specially formulated liquid flux ideal for soldering and tinning of copper and tinned materials. Easy to apply. Fast acting and economical in use, ensuring sound strong joints. No.3. Size 125ml.

No.3 Soldering Fluid 125ml BAK125

Cougartron CGT-550 weld cleaning and polishing fluid is used for cleaning, polishing, and passivating stainless steel welds and surfaces after welding and fabrication.

The CGT-550 is our most effective and powerful fluid that can be used for all types of TIG and MIG welds.

Instructions
Dip the weld cleaning brush into the weld cleaning fluid CGT-550
Clean the weld with a circular motion until the desired result
Wipe away any excess fluid residue from the treated surface
Apply neutralising fluid on the cleaned area
Wipe away with a clean cloth

Important: Weld cleaning brush needs to be wet at all times for optimal results. Therefore, dip the brush frequently into the weld cleaning fluid during the cleaning or electropolishing process.

CGT-550 Weld Cleaning and Polishing Fluid - 1L

Liquid flux is a key component to soldering because it removes oxidation that prevents solder from bonding to metals. Soldering even freshly cleaned metals requires flux because metals oxidize extremely fast under high soldering temperatures.

Solder Fluxing Fluid 500mlBottle

CGT-N5 is the new neutralising fluid specially developed strong ready-to-use formula for all stainless steel surfaces.

CGT-N5 will successfully remove acid residue from steel surfaces and prevent the (re) appearance of annoying white marks after weld cleaning, electropolishing, or marking process.

The fluid is water-based and does not contain solvents or phosphorus.

Instructions
Dip the weld cleaning brush into the weld cleaning fluid
Clean the weld with a circular motion until the desired result
Wipe away any excess fluid residue from the treated surface
Apply neutralising fluid CGT-N5 on the cleaned area
Wipe away with a clean cloth

Important: Never spray neutralising fluid on the surface that still has weld cleaning fluid residue to prevent the appearance of white stains. Always use a clean cloth for wiping away the neutralising fluid

CGT-N5 Hy-Performance Neutralising Fluid - 0.5L

CGT-350 is a mild but effective fluid for stainless steel weld cleaning and passivation.

CGT-350 can be used on light and dark TIG and light MIG welds.

Thanks to its specific chemical non-hazardous formula, CGT-350 can be transported by air.

Note: CGT-350 is not suitable for electropolishing – This activity requires the use of our Cougartron CGT-550 weld cleaning and polishing fluid – WELC3048

Instructions
Dip the weld cleaning brush into the weld cleaning fluid CGT-350
Clean the weld with a circular motion until the desired result
 Wipe away any excess fluid residue from the treated surface
Apply neutralising fluid on the cleaned area
Wipe away with a clean cloth

Important: Weld cleaning brush needs to be wet at all times for optimal results. Therefore, dip the brush frequently into the weld cleaning fluid during the cleaning or electropolishing process.

Find Fluxes Products

We suggest upgrading to Chrome