Brand

Rating

Price

Special Offers

Voltage

Length

Loop Testers - Free UK Delivery Over £25 - Buy Online | Zoro

Loop Testers

Introducing the Martindale advanced socket, earth loop, and RCD testers, perfect for non-trip earth loop impedance tests, L-NE reversal checks, and RCD trip assessments. This model comes equipped with valuable extras such as audible indication, a dedicated polarity swap touch test, and a 30mA RCD trip check for enhanced safety and efficiency in electrical testing. Trust in precision and convenience with this comprehensive testing solution.

Features and Benefits:
•Quick and simple to use, allowing easy testing of polarity, loop impedance and RCDs (30mA)
•Red/green LEDs and buzzer indicate 28 fault conditions
•Durable due to tough sculpted design, which also allows for easy removal

Typical Applications:
•Electrical installations

Socket, Earth Loop & RCD Tester

CTEC INDUCTION LOOP KIT PORTABLE 1.2M 1.2m2 Portable Hearing Loop Kits PL1/K1

Induction Loop Kit Portable 1.2M

Advanced sockets and loop testers that are ideal for non-trip earth loop impedance tests.

Features and Benefits:
•Quick and simple to use, allowing easy mains socket polarity and earth testing to be conducted
•Red/green LEDs are easy to read and show 28 fault conditions
•Durable due to tough sculpted design, which also allows for easy removal

Typical Applications:
•Electrical installations

Socket Tester, Non-trip Earth Loop

Deta I/CHIL/K3 CHANNEL TV & MUSIC ROOM LOOP INDUCTION KIT Induction Loop Systems I/CHIL/K3

I/CHIL/K3 Channel TV and Music Room Loop Induction Kit

CTEC AMPLIFIER COUNTER LOOP KIT AMT MIC 1.5m2 Counter Hearing Loop Amplifier Kits ML1/K

Amplifier Counter Loop Kit Amt Mic

CTEC RECEIVER HEARING LOOP Hearing Loop Test Equipment RXTI2

Receiver Hearing Loop - 2500133324

The mid-range model in Megger's LTW300 range of earth loop testers, the LTW325 builds upon the functionality of the LTW315 and adds such functionality as the ability to display Max Zs and R1 + R2.

Capable of full 2 wire loop testing designed not to trip 30ma RCDs and suitable for use with a wide range of voltages, the Megger LTW325 can be used to quickly and easily verify the loop impedance of electrical circuits without directly disconnecting the electrical supply. Loop testing is performed using only 2 leads and can be connected as phase to earth, phase to neutral or phase to phase.

An integrated no-trip loop test ensures that the Megger LTW325 will not trip any RCD ≥30mA while a separate high current loop test can be used should there not be an RCD fitted to the system. To ensure accuracy when testing this earth loop tester also includes an integrated electrical noise detection filter that will detect and filter out the effects of heavy electrical noise which can have a negative effect on training results.

- 2-wire non trip loop testing
- 2 wire fast testing (high current)
- Suitable for use on 110V to 280V applications
- Also suitable for use on 50V to 440V applications
- Phase to phase testing
- 20 KA PFC range
- 0.01Ω resolution
- Automatic noise detection and correction
- Auto loop test initiation
- Voltage and frequency measurements
- Max Zs display
- R1 + R2 display

LTW325 Earth Loop Tester

Megger's LTW425 is the best model available in Megger's LTW range of earth loop testers. It includes all of the features found on the other models and also enhances the overall resolution of the instrument, bumping it up from 0.001 to 0.0001Ω resolution. It's also the only model in the series to feature 40 KA PFC range.

Like other models in the series this earth loop tester is capable of performing 2, 3 and 4 wire earth loop measurements. It also performs 2-wire fast testing (high current) which can be used when an RCD isn't present in the installation.

The LTW425 also automatically compensantes for excess noise present within the installation, ensuring that the accuracy of loop tests performed remains high. The instrument is fully suitable for use on 110 to 280V and 50 to 440V applications, can carry out phase to phase testing, automatically starts loop tests when test leads are connected and can also be used to get accurate measurements of both frequency and voltage. It also displays Max Zs and R1 + R2.

- 2-wire non trip loop testing
- 2 wire fast testing (high current)
- Suitable for use on 110V to 280V applications
- Also suitable for use on 50V to 440V applications
- Phase to phase testing
- 20 KA PFC range
- 0.01Ω resolution
- Automatic noise detection and correction
- Auto loop test initiation
- Voltage and frequency measurements
- Max Zs display
- R1 + R2 display

LTW425 Earth Loop Tester

The entry-level tester in Megger's earth loop tester range, the LTW315 is used for carrying out 2 wire loop impedance measurements on phase to earth or phase to neutral.

Guaranteed not to trip working RCDs of more than 30mA thanks to a non-trip loop test and compatible with both three and single phase systems, this tester makes performing measurements easier by requiring the use of only 2 test leads in order to carry out measurement procedures. When there is no risk of tripping an RCD it is also possible to use high current loop testing mode.

When carrying out no-trip testing procedures the LTW315 constantly evaluates the level of noise detected on circuitry to ensure that the accuracy of results is not modified by the presence of electrical noise.

The Megger LTW315 is part of the LTW range of earth loop testers. The following table outlines the difference between each of the available models in this series.

-  2-wire loop testing procedures on phase to earth and phase to neutral
- Guaranteed to not trip out RCDs thanks to non-trip loop testing
- Noise detection filters out electrical noise that can create erratic readings
- Resolution down to 0.01Ω
- Portable lightweight instrument with tough carrying case encasing the tester
- AUTO start function starts testing as soon as the leads are connected
- PFC display up to 20kA

LTW315 Earth Loop Tester

A�high-quality remote LED indicator specifically designed for use in fire alarm systems. 
 Incorporates a high intensity, wide-angle red LED which is clearly visible from the front of the plate when active. 
 Ideal for�indicating the activation of hidden or out of-sight fire detectors, etc. 
 Includes a white write on area�allowing installers to add equipment locations. 
 Fits on standard UK 16mm flush or surface mount back boxes.

Find Loop Testers Products

We suggest upgrading to Chrome