Brand

Rating

Price

Special Offers

Product Type

Type

Point Diameter

Cut Diameter

Overall Length

Tip Material

Size

Key Size

Compatible Cutting Material

Handle Material

Punches - Wad & Hole - Free UK Delivery Over £25 - Buy Online | Zoro

The Maun Wad Punch Kit is a versatile tool for all your punching needs. Perfect for making precisely shaped gaskets and washers, cutting precise holes and shapes. All you need in one complete set. Punch both inner and outer holes for washers and gaskets. Works on a range of soft materials, including felt, rubber, leather, plastic and cork.  Made to last, with a robust construction and rust-proof finish. Chemically blackened handle and punches for long life. The centre punch case has been hardened to HRC 57 for durability. Whilst the punches have been ground to a fine cutting edge, then hardened and tempered to HRC 45 for durability.  The handle has been fully heat-treated to withstand hammer or mattet blows. Its also comfortable to use over long periods. All included punch sizes fit onto one handle. The interchangeable punches easily screw onto handle for quick changes. A spring-loaded plunger accurately positions centre of hole and ejects the slug.  The Maun Wad Punch Kit (or hollow punch set) is suplied in a lightweight polyprolylene storage box. Great for professional craftsmen and serious DIY-ers. Ideal for:  -Vintage vehicle maintenance and restoration enthusiasts for making water pump gaskets and washers.-Floor covering technicians for replacing/repairing marked or damaged spots on cork or vinyl flooring.- Leather crafters for cutting precise holes in a workpiece.  Made in England. Standard 12 months' warranty. Register your tool to extend this to 2 years.

Available in metric sizes, these non-rotating hole cutters are an effective way of punching holes in sheet metal. Heat-treated for a long keen cutting life providing burr-free accuracy time after time. A small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the material. Pressure is then applied by tightening the bolt and thus the hole is literally punched out. A hexagon key is required to operate this tool, which can be purchased separately.

Features and Benefits
• Available in a range of sizes to suit your needs
• A rapid and simple way to cut even metric sized holes in up to 16 gauge sheet metal
• Unique design ensures an even cutting load and produces a hole that needs no further finishing
• Cutting edges are heat treated with a  black anti-corrosive finish that prevents rusting and is resistant to wear and tear

Typical Applications
• Engineering
• Automotive

A quick and easy way to cut clean imperial sized holes in sheet metal up to 16 gauge, these non-rotating hole cutters have a unique design that allows the product to produce a burr free hole. Each product requires a hexagon key to operate it, which can be purchased separately. Manufactured from high quality steel, each cutter is finished with an anti-corrosive treatment  and can be purchased in a variety of imperial sizes.

Features and Benefits
• Available in a range of sizes to suit your specific application and requirements
• Manufactured from durable steel
• Anti-corrosive surface finish further protects the product from wear and tear
• Capable of cutting mild steel up to 16swg (1.62mm), stainless steel up to 16swg (1.62mm), sheet copper, brass and aluminum up to 2.0mm for versatility of use
• Heat treated for overall product longevity

Typical Applications
• Construction
• Engineering
• Automotive

For a variety of soft materials, this range of wad punches can be used for cutting holes and producing clean edged discs from the material being cut. Manufactured from carbon steel, the product is available in a variety of sizes.

Features and Benefits
• Available in a range of sizes to suit your needs
• Manufactured from carbon steel or optimum durability
• Simple yet effective way of removing holes from your desired material

Typical Applications
• Joinery
• Crafting
• Automotive

Suitable for the precise & accurate punching of holes in Steel, Aluminium, Brass, Plastic and Leather.

Manufactured from hardened steel delivering 1.2 tons of punch providing smooth piercing with minimum effort resulting in perfect clean cut holes when used with Kennedy hole dies.

Suitable for materials up to 14 gauge.

Black Oxide finish.

Notes
• Images are for illustration purposes only and the actual product may differ slighly

These tools facilitate the breaking and riveting of roller chains pursuant to 
DIN 8017/8018 and are useful for workshop use.

Non-rotating hole cutter. Heat treated for a long keen cutting life providing burr-free accuracy time after time. A small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the material. Pressure is then applied by tightening the bolt and thus the hole is literally punched out. 

Capacity: mild steel up to 16swg (1.62mm), stainless steel up to 16swg (1.62mm), sheet copper, brass and aluminum up to 2.0mm. Plus many other sheet materials and ductile plastic.

Available in sizes 19mm, 25.4mm. Rectangular punches can also be supplied to special order. 
Please Note: Requires hexagon key to operate - supplied separately.

Manufactured from hardened carbon steel, these hollow punches are designed for punching clean holes in a variety of materials. The through body ejection of the punched material makes them ideal for punching clean edged holes in leather, wood, plastics, card and paper. Available in a range of sizes to suit your needs.

Features and Benefits
• Manufactured from hardened carbon steel to ensure optimum resilience
• Available in a range of sizes to suit your requirements
• Can be used on a variety of materials such as leather, wood, plastic, card and paper for versatility of use

Typical Applications
• Manufacturing
• Joinery
• Crafting

Supplied in hardwearing PVC pocket wallets with tie fastening, these hollow punch sets are ideal for punching clean-edged holes in leather, wood, plastics, card and paper. Manufactured from hardened carbon steel.

Features and Benefits
• Punches manufactured from hardened carbon steel for longevity and strength
• Supplied in a PVC wallet to keep your tools organised and stored 
• Available with varying sizes to suit your requirements

Typical Applications
• Textile Working
• Hobbyists and Crafts
• Engineering

Suitable for the precise & accurate punching of holes in Steel, Aluminium, Brass, Plastic and Leather.

Manufactured from hardened steel delivering 1.2 tons of punch providing smooth piercing with minimum effort resulting in perfect clean cut holes when used with Kennedy hole punches.

Suitable for materials up to 14 gauge.

Kits comprise of a single wad punch handle onto which screws a series of nine interchangeable punches. The handles are blackened and punches heat treated and chemically blacked. The handle should be struck with a hammer or mallet onto a wooden block. The spring loaded plunger in the handle enables holes to be accurately centred and serves to eject the slug. The metric set contains 5, 6, 8, 10, 12.5, 16, 20, 25 and 32mm sizes. The imperial set contains 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8 and 1in sizes. Set contains 5,6,8,10,12.5,16,20,25 and 32mm sizes.

Metric Wad Punch Kit 1000/05 MAUWPKM

Non-rotating hole cutter. Heat treated for a long keen cutting life providing burr-free accuracy time after time. A small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the material. Pressure is then applied by tightening the bolt and thus the hole is literally punched out. 

Capacity: mild steel up to 16swg (1.62mm), stainless steel up to 16swg (1.62mm), sheet copper, brass and aluminum up to 2.0mm. Plus many other sheet materials and ductile plastic.

Other sizes available on request. Imperial 3/8" to 1 3/4". Metric 10mm to 80mm. 
Squares punches are available in sizes 19mm, 25.4mm. Rectangular punches can also be supplied to special order.

Sheet Metal Cutter/Hole Punch 27.5MM Diameter Round

Sheet Metal Cutter/Hole Punch 1.1/4" Diameter Round

This 14 piece punch kit is suitable for the precise & accurate punching of holes in Steel, Aluminium, Brass, Plastic and Leather.

Manufactured from hardened steel delivering 1.2 tons of punch providing smooth piercing with minimum effort resulting in perfect clean cut holes.

Adjustable depth gauge. Suitable for materials up to 14 gauge. Die and punch sizes: 2.38, 3.18, 3.97, 4.76, 5.56, 6.35, & 7.14mm. (3/32", 1/8", 5/32", 3/16", 7/32", 1/4" & 9/32")

Hand Operated Hole Punch Kit

Manufactured from hardened carbon steel. Through body ejection of the punched material makes them ideal for punching clean edged holes in leather, wood, plastics, card and paper.

25mm (1") Wad/Hollow Punch

1/4" Punch for KEN5607800 K Hole Punch

DURABLE: This hollow punch set is made from strong, heat treated steel for durability. VERSATILE AND EASY TO USE: With knurled bodies for a secure, non-slip grip, they are ideal for making clean holes in gaskets, leather, plastic, rubber, vinyl and other soft materials. SIZES: The set includes sizes: 2.5mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm and 10mm.

9 Piece Hollow Punch Set

These tools facilitate the breaking and riveting of roller chains pursuant to 
DIN 8017/8018 and are useful for workshop use.    
To break chains with parallel bearing pins it is necessary to use Riveting Plate together with Pin Punch. These tool kits can also be used to assemble chains. The Fetching-Up Punch and the Bearing Pin Riveting Punch are used to complete this operation.
Riveting Punch

Rivetting Punch E 05B-06B

Non-rotating hole cutter. Heat treated for a long keen cutting life providing burr-free accuracy time after time. A small pilot hole is drilled allowing a connecting bolt to join the punch on one side and the die on the other side of the material. Pressure is then applied by tightening the bolt and thus the hole is literally punched out. 

Capacity: mild steel up to 16swg (1.62mm), stainless steel up to 16swg (1.62mm), sheet copper, brass and aluminum up to 2.0mm. Plus many other sheet materials and ductile plastic.

Available in sizes 19mm, 25.4mm. Rectangular punches can also be supplied to special order. 
Please Note: Requires hexagon key to operate - supplied separately.

25.4mm Square Hole Cutter

Hozelock Hole Punch 115192

Due to geographical locations we are unable to deliver to: Isle of Wight, Isle of Man and Ireland.

Hole Punch - 115192

Head Hollow Punch 25 mm 64678

11mm (7/16") Wad/Hollow Punch for Cork, Leather, Plastics

Kennedy® hollow punches are manufactured from hardened carbon steel with a ground cutting edge, they are designed to punch easily through leather, wood, plastic, card and paper. The disc of material cut by the punch is ejected through the hollow body of the punch to leave a clean edged hole, every time.

Contents: 6, 8, 10, 12, 16 and 19mm hollow punches

Supplied in a PVC wallet with tie fastening.

6-19mm Hollow Punch Set (6 Piece) for Cork, Leather, Plastics

7/32" Die for PPK2812 Hole Punch Kit

Cembre HEAD PUNCHING HYDRAULIC Hydraulic - Hole Punching RH-FL75

Head Punching Hydraulic - 2501000832

Makita Punch is designed to be used with Makita 10 Gauge Nibbler model JN3201 to make cuts in mild steel. Manufactured from high quality metals for added durability and long life. The punch is a direct replacment for the original and installs quickly and easily.

792728-1 Punch JN3200

For stamping out cardboard, leather, rubber, sealing materials and other soft materials  Cutting edge hardened  Shaft blue varnished  Delivery in GEDORE i-BOXX® 72 no. 1101 L  Dimensions: W 367 x D 316 x H 72 mm  Dimensions: W 367 x D 316 x H 72 mm

Set of arc punches 2-22 mm in i-BOXX 72

792265-5 Punch JN1600

Punch Set 1/8in. 3/8in. - 5 Piece

These Rapid Eyelets are ideal for decorating or repairing leather, textiles and plastics. They are perfect for shoes, belts, bags and many more. The eyelets are made from steel for strength and durability. They are quick and easy to apply. 1 x Pack of 25 Rapid Eyelets 8mm Supplied with 1 x Metal Anvil and 1 x Hammer.

Find Punches - Wad & Hole Products