Brand

Rating

Price

Special Offers

Product Type

Length

Diameter

Thermometers Contact - Free UK Delivery Over £25 - Buy Online | Zoro

Mineral Insulated Immersion Probe has a rounded tip suitable for semi solid and liquid temperature measurement. Comprising of a handle, 1 metre coiled cable and a K-Type mini plug. A semi flexible construction allows the probe to be bent or shaped for hard to reach applications. They are suitable for use in corrosive material tests and high temperature molten metal measurements.

The ATK-610B oﬀers a single input K-type socket that can accept any K-Type probe along with user a selectable resolution of 0.1°C up to 199°C or 1°C above 200°C.

-50° to 1300°C x 0.1°
Measures in °C , °F, or Kelvin, user selectable
Sampling rate of 2.5 times per second
Over range indication
Data hold freezes displayed values
Max hold displays highest measured value
Auto power off
Low battery indication
Room temperature compensation
45mm LCD display with backlight and function indicators
Impact-resistant ABS case with protective rubber holster & flip out stand
Supplied with carry case, rubber holster, 950mm bead probe & battery

Single Input K Type Thermometer

The APT-5035 4-in-1 environment meter is a cost-effective introduction to aid conformance to health & safety in the work place. It measures sound levels, light levels, %RH and temperature. The LCD display has large digits and function indicators.

2 ranges for sound with selectable ‘A’ or ‘C’ frequency weightings
Cosine corrected silicon diode sensor for Lux levels
Semiconductor sensors in the probe for humidity and ambient temperature measurements
K-Type input for °C or °F temperature measurements
28mm LCD display with function indicators
Data hold function freezes displayed value
Max hold displays highest measured value
Auto power off
Low battery indication
Standard 4mm camera bush for tripod mounting
Supplied in a carry case with lux probe, humidity/temperature probe, K-Type wire probe, wind muffler and battery

4 in 1 Environment Meter

The AST-17 comes equipped with a protective sheath containing a ventilation hole allowing the unit to be used as a stirrer whilst simultaneously displaying temperature. The sheath also attaches to the end of the unit to extend the handle length. This unit offers data hold, auto off after 1 hour of inactivity and an IP-54 protection rating. It has a measurement range of -50 to 150°C offering excellent value for money.

Measures in °C
Pointed probe for liquid or semi-solid sampling
Data hold function retains the displayed value
Auto power off after 1 hour of no activity
125 x 4mm Ø Stainless Steel probe
10mm LCD display with function indicators
Polycarbonate case and protective sheath
Push button membrane keypad
Supplied with Safety cap and battery

Splash Proof Pen-Type Thermometer

The AST-10 is a low cost, high accuracy thermometer. It features data hold to retain the displayed value and auto power off after an hour of inactivity. It’s pointed tip probe makes it ideal for liquid and semi-solid sampling. With three simple function buttons it is easy to use.

-50° to 300°C x 0.1°
°C or °F selection
On Off button
Data hold function
Auto power off after 1 hour of no activity
150 x 4mmø stainless steel probe
The thermistor sensor is located in the bottom 10mm of the probe
Pointed probe tip
Ideal for liquid or semi-solid sampling
10mm LCD display with function indicators
Polycarbonate case
Supplied with a storage tube and battery

Pen Type Thermometer

The AST-1027 features an audible alarm that sounds when the set temperature is exceeded. The alarm is set using its soft touch rubber function buttons. This unit is also splash-proof, providing protection against light water spray.

-50° to 300°C x 1°C
Audible alarm when target temperature set by the user is met or exceeded
15mm LCD display with alarm indicator
Soft touch rubber function buttons
Casing is waterproof to IPX-3 standard – gives protection against water spraying provided the black rubber ring around the battery compartment is in place at all times. This product is not suitable for total immersion
145 x 4mmØ stainless steel penetration probe with pointed tip
Supplied with safety cap and battery

Pen Type Alarm Thermometer

The AST-18 is a feature packed thermometer offering an enhanced measurement range (-50 to 330°C), data hold to retain the measured value, auto power off after 15mins of inactivity and an IP-54 protection rating. The protective sheath with ventilation hole allows the unit to be used as a stirrer whilst simultaneously displaying temperature.

-50° to 330°C x 0.1°
Water resistant to IP-54 rating - dust protected & splash proof
Auto power off after 15mins of no activity
Push-button membrane keypad
150 x 4mm Ø stainless steel probe
The thermistor sensor is located in the bottom 10mm of the probe
Pointed probe tip makes this instrument ideal for liquid or semi-solid sampling
13mm LCD display with function indicators
Data hold function retains the displayed value
Polycarbonate case and protective sheath
Supplied with a protective probe sheath with pocket clip & battery

Waterproof Pen Type Thermometer

The AIR-801 is a compact easy-to-use infrared thermometer with Class II laser sighting, it is ideal for non-contact measurement of surface temperatures. Suitable for food preparation, plant & general maintenance, HVAC, transport & automotive, asphalt, health & safety, diesel and fleet maintenance.

-50° to 350°C x 0.1°
Measures °C or °F
Just point, pull the trigger and read the display
Class II laser to identify the centre point of the area being measured
Distance to spot size ratio is 13 to 1 at the focal point
Fixed emissivity at 0.95
Response time less than 500 milliseconds
25mm LCD display with backlight
Automatic data hold when trigger released
Mix/max memory
Auto power off after 20 seconds of no activity
Low battery indication
Backlight and laser can be user disabled
Impact-resistant ABS plastic case
Supplied with battery

Laser Infrared Thermometer

Mineral Insulated K-Type Immersion Probe 500mm x 3mm

The AST-9312A features a specialised corkscrew tip designed to penetrate harder samples such as frozen foodstuffs.  With data hold to retain the displayed value and auto off after 1 hour of inactivity, this unit is simple and convenient to use.

-50° to 150°C x 0.1°
100 x 8mm Corkscrew tip Stainless Steel Probe is deal for frozen food
Data hold function retains the displayed value
Auto power off after 1 hour of no activity
Polycarbonate case with membrane keypad
12mm LCD display with function indicators
Thermistor sensor is located in the bottom 10mm of the probe
Supplied with the probe protector cap & battery

Corkscrew T Bar Thermometer

The AET-960 brings an increased accuracy and resolution to high temperature measurement, oﬀering a 0.1°C resolution all the way up to 1000°C. In addition, this instrument supports the use of both K or J type probes. Probe type (K/J) can be switched by inserting the probe of your chosen type in to the unit and pressing the set button to switch the conﬁguration of the unit.

-200° to 1370°C x 0.1° below 1000°C Type K
-200° to 1100°C x 0.1° below 1000°C Type J
Measures in °C, °F or Kelvin, user selectable
55mm Dual LCD display with backlight and function indicators
4 Input thermometer accepts 4 inputs with individual measurements or as differential measurements, T1 minus T2 or T3 minus T4
Sampling rate of 2.5 times per second
Data hold freezes displayed values
Min/max memory since power on or last reset
Average function of the last 10 measured values
Auto power off
Low battery indication
Impact-resistant ABS case with a 4mm camera bush
2 year warranty
Supplied with soft carry case, 2 x 950mm bead probes and battery

Hi-Accuracy 4 Input K & J Type Thermometer

The AST-9258 offers modern, compact design combined with ease of use making this a cost-effective thermometer for liquid and semi-solid sampling. The 100 x 4mmØ stainless steel probe is connected to the unit with a 1 metre cable and can be clipped to the instrument body for single handed use.

Data hold function retains displayed value
Min/max memory since power on
Programmable alarm for min/max values
Audible alarm at the high/low temperature limits
Auto power off after 1 hour
Low battery indicator
Impact-resistant ABS case incorporates a desk stand and compartment for the sensor cable when not in use
Supplied with a protective probe cap and battery

Memory Alarm Thermometer

The AIR-86 is a miniature pen-type thermometer designed for quick and easy non-contact measurement of surface areas. Suitable for monitoring appliances, heating, ventilation & air conditioning systems.

-50° to 260°C x 0.1°
User-selectable °C or °F
Hold within 6 inches of the area to be measured, push the button, read the display
Distance to spot size ratio is 1 to 1 at the focal point
Fixed emissivity at 0.95
Response time less than 1 second
Large 20mm LCD display with function indicators
Automatic data hold
Auto power-off 
Low battery indication
Impact-resistant ABS case
Supplied with batteries

Mini IR Thermometer

The AET-959 brings an increased accuracy and resolution to high temperature measurement, oﬀering a 0.1°C resolution all the way up to 1000°C. In addition, this instrument supports the use of both K or J type probes. Probe type (K/J) can be switched by inserting the probe of your chosen type in to the unit and pressing the set button to switch the conﬁguration of the unit.

-200° to 1370°C x 0.1° below 1000°C Type K
-200° to 1100°C x 0.1° below 1000°C Type J
Measures in °C, °F or Kelvin, user selectable
55mm Dual LCD display with backlight and function indicators
Dual input thermometer accepts 2 inputs with individual measurements or as differential measurements, T1 minus T2
Sampling rate of 2.5 times per second
Data hold freezes displayed values
Min/max memory since power on or last reset
Average function of the last 10 measured values
Auto power off
Low battery indication
Impact-resistant ABS case with a 4mm camera bush
2 year warranty
Supplied with soft carry case, 2 x 950mm bead probes and battery

Hi-Accuracy Dual Input K & J Type Thermometer

Pocket-sized digital moisture meter with integrated electrodes for fast and convenient readings of the moisture content of wood and aggregate materials.

Suitable for wood - sawn timber, cardboard and paper and aggregate materials - like plaster, concrete and mortar
Measures the electrical resistance and converts it to display % moisture content.
Measures Moisture and Temperature
Integrated 10mm electrodes (replaceable)
Colour display with Tri-Colour Bargraph; Green 0 to 22%, Yellow 22.1 to 51%, Red >51%
Data Hold and Max Hold
Impact-resistant ABS case.
Function check displays reference readings
Auto power off after 2 minutes of no activity
Low Battery Indicator
Supplied with Carry Pouch, Protective Cap and 5 batteries

Wood and Aggregate Thermo-Moisture Meter

The AIR-829 features a specialised high temperature range capable of measuring up to an impressive 950°C. 

-30°C to 950°C x 0.1°
User selectable units °C or °F
Class II star burst laser to identify the centre point of the area being measured
Distance to spot size ratio is 30 to 1 at the focal point
Adjustable emissivity from 0.1 to 1.0
Response time less than 500 milliseconds
26mm LCD display with backlight and function indicators
Automatic data hold when trigger released
Min/max memory
Auto power off after 20 seconds of no activity
Low battery indication
Supplied with holster-style carry pouch and battery

Hi-Temperature Laser Infrared Thermometer

The AIR-817 is a multi-function thermometer that offers a primary infrared thermometer for non-contact surface measurement, but also includes a traditional K-Type thermometer input for high temperature air / liquid measurement. It also displays humidity and offers wet bulb and dew point calculations.

The unit has an inbuilt LED light for working in dark environments, and a UV light for leak detection.

The colour LCD display shows current set emissivity, absolute temperature, infrared temperature, relative humidity, dew point and k-type temperature over a selection of displays that can be easily toggled via the mode button.

The built-in alarm can be user selected to either a mildew alarm or temperature difference alarm. The mildew alarm turns green if the sample is not mildewed and red if mildewed. The temperature difference alarm stays green if the sample is within 5°C of the ambient temperature or red if it goes beyond.

-50° to 550°C (Infrared), -50° to 850°C (K-Type)
0 to 100% Humidity
Measures °C or °F
Just point, pull the trigger and read the display
Readings automatically hold on trigger release
Class II laser to identify the centre point of the area being measured
Distance to spot size ratio is 13 to 1 at the focal point
1 to 1 -0 adjustable emissivity
Response time less than 500 milliseconds
Mix/max memory
Auto power off after 20 seconds of no activity
Low battery indication
Impact-resistant ABS plastic case
Battery, soft carry pouch and K-type bead probe

Browse our original ATP products in Thermometers Contact

We suggest upgrading to Chrome