LeadTime

Brand

Rating

Price

Special Offers

Product Type

Type

Battery Capacity

Power Source

Number of Tools

Voltage

Cordless Twin Packs & Kits - Free UK Delivery Over £25 - Buy Online | Zoro

This kit contains the DCD796 combi drill driver that features brushless technology and the DCF887 impact driver which has 205nm of torque.

DCD796 Features and Benefits
• 5.0Ah Li-Ion battery technology and brushless motor technology for excellent efficiency 
• The ultra compact, lightweight design allows use in confined spaces
• 15 position adjustable torque control allows consistent screw driving into a variety of materials
• Improved ergonomic design with rubber grip over mould improves user comfort 
• Improved air flow to the motor for cooler electronics and increased power 3 position super bright LED light

DCF887 Features and Benefits
• High power brushless motor outputs up to 205Nm of torque ensuring heavy applications are completed quickly
• Application control is achieved through 3 motor speeds and torque settings including PrecisionDrive mode which offers additional control in screwdriving applications
• Super lightweight and compact making the tool very comfortable to use and allowing it to fit in small spaces
• 3x LED "Halo" light ring offers excellent workpiece lighting
• 5.0Ah XR battery packs offer great runtime and compatability with other 18V XR DEWALT power tools

Notes
DCD796
• Max Torque Hard/soft 70/27 Nm. 
• Power Output: 280W.
•  No Load Speed: 0-550/2000 rpm. 
• Beats per Minute: 0-9350/34000 bpm. 
• Chuck Capacity: 1.5-13 mm. 
• Max. Drilling Capacity [Wood]: 40 [Metal]: 13 mm [Masonry]: 13 mm.
• Length: 174 mm, Height: 203 mm, Width: 67 mm. 
• Weight: 1.8 kg 

DCF887
• Max Torque: 205 Nm 
• Power Output: 400 Watt 
• Max. Bolt Diameter M12
• No Load Speed: 0-1000, 0-2800, 0-3250rpm 
• Impacts per Minute: 0 - 3250 ipm 
• Bit Holder: 6.35mm (1/4") 
• Length: 134 mm, Height: 196 mm

Combi Drill and Impact Driver, XR 18V Brushless Kit in TSTAK Box (2X 5.0AH Batteries)

The DEWALT DCK266P2T Twin Pack, contains the following 1 x 18V DCD796 XR Brushless Compact Combi Drill has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck 13mm No Load Speed 0-550/0-2,000/min. Impact Rate 0-9,350/0-34,000/min. Max Torque 70Nm Capacity Wood 40mm, Steel 13mm, Masonry 13mm 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder 6.35mm (1/4in) No Load Speed 0-850/0-2,100/0-3,000/min. Impact Rate 0-1,800/0-2,900/0-3,700/bpm Max Torque 26/80/203Nm Weight 1.56kg 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Voltage 10.8/14.4/18V. Battery Chemistry Li-ion Charging Current 4.0 A Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x TSTAK­ II Toolbox.

DCK266P2T XR Brushless Twin Pack 18V 2 x 5.0Ah Li-ion DEWDCK266P2T

The DCD796 Combi Hammer Drill and DCF887 Impact Driver are essential tools for any professional or DIY enthusiast. The DCD796 features an efficient 18V XR Li-Ion brushless motor, a two-speed all-metal transmission, and a 15-position adjustable torque control, making it versatile for various materials and compact for use in tight spaces. Its ergonomic design enhances comfort, while the Li-Ion battery ensures quick insertion and removal. Meanwhile, the DCF887 boasts a powerful brushless motor delivering up to 205Nm of torque, three motor speeds, and a PrecisionDrive mode for careful screwdriving. Both tools feature LED lights for visibility and are compatible with all DEWALT 18V XR battery packs, promoting efficiency in any project.

Features and Benefits 
• Advanced Brushless Technology delivers superior efficiency and extends the lifespan of both tools
• Dual-Speed All-Metal Gearbox enhances runtime and adaptability for diverse tasks
• Adjustable 15-Position Torque Setting guarantees reliable screw driving into different materials
• Lightweight and Compact Build allows for effortless use in tight areas
• Comfort-Enhancing Rubber Grip promotes better handling during extended work sessions
• Battery Life Indicator on the Li-Ion pack simplifies battery level checks
• Controlled Screwdriving Feature in the impact driver minimises the risk of fastener and material damage
• Integrated LED Light improves visibility, facilitating work in dimly lit environments

DCD796 Combi Hammer Drill:
Max torque (hard): 70Nm
Max torque (soft): 27Nm
Power output: 460W
No load speed: 0 - 550/2,000rpm
Beats per minute: 0 - 9,350/3,4000bpm
Chuck capacity: 1.5 - 13mm
Capacities: wood 40mm, steel 13mm, masonry 13mm
Weight: 1.8kg
Length: 190mm
Height: 203mm
Width: 67mm

DCF887 Impact Driver:
Max torque: 205Nm
Power output: 400W
No load speed: 0 - 1,000, 0 - 2,800, 0 - 3,250rpm
Impacts per minute: 0 - 3,800ipm
Bit Holder: 6.35mm (1/4")
Weight: 0.94kg
Length: 134mm
Height: 195mm

DCK266P2-GB 18V XR Combi Hammer Drill & Impact Driver Twin Pack

The DEWALT DCK2062M2T XR Brushless Twin Pack, contains the following:  1 x 18V DCD709 XR Brushless Combi Drill has an overall head length of just 180mm, allowing you to get into the smallest of spaces. Fitted with an ergonomically designed handle for optimum comfort and control.  Chuck: 13mmNo Load Speed: 0-450/0-1,650/min.Impact Rate: 0-7,650/0-28,050/bpmMax. Torque: 65Nm, 15 Settings #43; DrillCapacity: Wood 30mm, Steel 13mm, Masonry 13mm  1 x 18V DCF809 XR Brushless Impact Driver is super compact at only 130mm in length, allowing you to get into even smaller spaces than most other impact drivers. Fitted with an ergonomically designed handle for optimum comfort and control.  Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,800/min.Impact Rate: 0-32,000/bpmMax. Torque: 190Nm  Also supplied with: 2 x 18V 4.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Li-ion Charger and 1 x TSTAK II Kit Box

DCK2062M2T XR Brushless Compact Twin Pack 18V 2 X 4.0AH Li-ion

The DEWALT DCK755P3T XR 7 Piece Kit, contains the following 1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15-position adjustable torque control for consistent screwdriving. Chuck 13mm Keyless No Load Speed 0-550/0-2,000/min. Impact Rate 0-9,350/34,000/bpm Torque 27/70Nm, 15 Settings Capacity Steel 13mm, Masonry 13mm, Wood 40mm 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder 6.35mm (1/4in) No Load Speed 0-1,000/0-2,800/0-3,250/min. Impact Rate 0-1,800/0-2,900/0-3,800/bpm Max. Torque 26/80/205Nm Weight 1.56kg 1 x 18V DCS355 XR Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed 0-20,000/min. Length 310mm Weight 1.06kg 1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes Rotary, SDS Hammer, Chisel Only No Load Speed 0-1,100/min. Impact Rate 0-4,600/bpm with 2.1 joules Capacity Wood 26mm, Metal 13mm, Masonry 24mm Weight 3.1kg 1 x 18V DCG405 XR Brushless Grinder with an electronic clutch that reduces the kickback reaction in the event of a pinch or stall. The 2-position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed 9,000/min. Disc Diameter 125mm, M14 Spindle Weight 1.75kg 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general-purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work. No Load Speed 5,500/min. Max. Cutting Depth @90º 64mm Blade 184 x 16mm Bore Bevel Capacity 57 1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45 in both directions. The dust port is AirLock compatible. Strokes No Load 0-3,200/min. Stroke Length 26mm Bevel Capacity 0-45 Capacity Wood 135mm, Metal 10mm Weight 2.1kg Also supplied with 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Li-ion Charger, 2 x TSTAK VI Deep Toolboxes (171195), 1 x TSTAK II Toolbox (Suitcase Flat Top) (170703) and 1 x TSTAK Carrier Base (171229)

DCK755P3T XR Brushless 7 Piece Kit 18V 3 x 5.0Ah Li-ion DEWDCK755P3T

The DEWALT DCK211D2T XR Twin Pack, contains the following 1 x 12V DCD710 XR Sub-Compact Drill Driver with adjustable torque control for consistent screwdriving into a variety of materials. 10mm single sleeve keyless chuck with automatic spindle lock for quick and easy bit change. All metal gearing for efficient power transmission and long tool life. Chuck 10mm No Load Speed 0-400/0-1,500/min. Max Torque 16Nm, 15 Settings Capacity Wood 19mm, Steel 10mm Weight 0.91kg 1 x 12V DCF815 XR Impact Driver with all-metal gearing and aluminium front housing that provides greater heat dispersion for increased motor life. 3 LED 'Halo' Ring provides illumination of the workpiece. Bit Holder 6.35mm (1/4in) No Load Speed 2,450/min. Impacts Per Minute 3,400/min. Max Torque 107Nm Capacity Bolt M12 Weight 1.04kg Supplied with 2 x 12V 2.0Ah Li-ion Batteries, 1 x 12-18V Multi-Voltage XR Charger and 1 x TSTAK V Toolbox.

DCK211D2T XR Twin Pack 12V 2 x 2.0Ah Li-ion DEWDCK211D2T

Dewalt DCF891H2T 18V XR Brushless 1/2" Hog Ring Impact Wrench comes with 2 x 5.0Ah DCBP518 Powerstack Batteries
The Dewalt DCF891 Impact Wrench is fitted with an efficient brushless motor and 1/2 square drive anvil with hog ring for quick socket changes. This ultra-compact and lightweight machine allows easy access in confined areas with 812Nm of fastening torque ensuring removal of the tightest bolts. A variable speed trigger allows complete control over all applications and a 4 mode select feature gives different modes and speed settings for ultimate control and performance. The precision wrench mode prevents over-tightening in forward and nut run-off in reverse. An ultra-bright white LED work light with delay feature improves visibility and functionality plus the brightness control allows dimming or turn off to suit the working conditions. This DCF891H2T model comes with 2 x 5.0Ah Powerstack Batteries and a DCB1104 Charger in a Carry Case.  Powerstack is Dewalt's most powerful, compact and lightest weight battery EVER, offering the next dimension in power for professional applications. You can expect up to 50% more power in a 25% more compact form and 15% lighter weight.

Features:
812Nm of Fastening Torque
1084Nm of Breakaway Torque
Compact 175mm Head Length
Brushless Motor
4 Mode Switch for Accurate Application Control
1/2" Anvil with Hog Ring
Comes With:
2 x DCBP518 Powerstack 5.0Ah Batteries
DCB1104 Charger
Belt Hook
Carry Case
Specification:
Max. torque: 812nm
No load speed: 0 - 2000 rpm
Impacts per minute: 0 - 3250 ipm
Max. bolt diameter: M24
Number of modes: 4
Anvil size and type: 1/2 Inch Hog Ring

DCF891H2T 18V XR Brushless 1/2" Hog Ring Impact Wrench (2 x Powerstack Batteries)

The DEWALT DCK2110L2 XR Brushless Sub-Compact Twin Pack, contains the following 1 x 12V DCD701 XR Brushless Sub-Compact Drill Driver has a lightweight design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. Compatible with your existing 10.8V batteries and tools. Chuck 10mm Keyless No Load Speed 0-425/0-1,500/min. Max. Torque 57.5Nm, 15 Settings Capacity Wood 20mm Weight 0.9kg 1 x 12V DCF801 XR Brushless Sub-Compact Impact Driver with 3 electronic speeds for greater control when working on precise applications. Precision Drive mode is ideal for fine screw work, preventing the screw head or material from being damaged. Compatible with your existing 10.8V batteries and tools. No Load Speed 0-950/0-1,950/0-2,850/min. Impact Rate 0-3,600/bpm Max. Torque 163Nm Bare Unit Weight 0.8kg Also supplied with 2 x 12V 3.0Ah Li-ion Batteries, 1 x 10.8-18V DCB112 XR Multi-Voltage Li-ion Charger and 1 x TSTAK II Kit Box

DCK2110L2 XR Brushless Sub-Compact Twin Pack 12V 2 x 3.0Ah Li-ion DEWDCK2110L2

The DEWALT DCK276T2T FlexVolt Twin Pack, contains the following 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck 13mm Keyless. No Load Speed 0-450/0-1,300/0-2,000/Min. Impact Rate 0-8,600/0-25,500/0-38,250/bpm. Max Torque 95Nm, 11 Settings. Capacity Wood 55mm, Steel 15mm, Masonry 16mm Weight 2.1kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder 6.35mm (1/4in). No Load Speed 0-850/0-2,100/0-3,000/Min. Impact Rate 0-1,800/0-2,900/0-3,700/bpm. Max Torque 26/80/203Nm. Weight 1.56kg. 1 x 18-54V DCB116 FlexVolt XR Fast Charger that will charge 54V FlexVolt and 18V XR batteries. A bright LED indicator communicates battery charge status charged, charging, power problem, and battery too hot or too cold conditions. It has a compact design that is wall mountable and fan cooled so it can charge efficiently between 4C and 40C. Also supplied with 2 x 18/54V 6.0/2.0Ah FlexVolt Li-ion Batteries, 2 x Belt Hooks, 1 x Side Handle for Combi Drill and 1 x DWST1-71195 TSTAK Deep Toolbox.

DCK276T2T FlexVolt XR Twin Pack 18V 2 x 18/54V 6.0/2.0Ah Li-ion DEWDCK276T2T

The DEWALT DCK276P2 Brushless Twin Pack, contains the following 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck 13mm Keyless. No Load Speed 0-450/0-1,300/0-2,000/min. Impact Rate 0-8,600/0-25,500/0-38,250/bpm. Max Torque 95Nm, 11 Settings. Capacity Wood 55mm, Steel 15mm, Masonry 16mm Weight 2.1kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder 6.35mm (1/4in). No Load Speed 0-850/0-2,100/0-3,000/min. Impact Rate 0-1,800/0-2,900/0-3,700/bpm. Max Torque 26/80/203Nm. Weight 1.56kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS150 TOUGHSYSTEM Toolbox.

DCK276P2 Brushless Twin Pack 18V 2 x 5.0Ah Li-ion DEWDCK276P2

The DEWALT DCK2052H1 Twin Kit contains the following: 1 x 18V DCD999 XR XRP Combi Drill comes with FlexVolt ADVANTAGE technology. This unique electronic module features pack identification technology. This enables the tool to recognise when an XR FLEXVOLT battery is attached and to then unlock even more power. A foot LED with delay feature, provides improved visibility and flashlight functionality. Chuck Capacity: 1.5-13mm. No Load Speed: 0-500/1, 500/2, 250/min. Impact Rate: 38, 250/bpm. Max. Torque: 67Nm. Max. Drilling Capacity: Metal 15mm, Wood 55mm, Masonry 13mm. Weight: 1.6kg (without battery) 1 x 18V DCF850E2T XR Brushless Impact Driver comes with a 3 mode switch for enhanced control including Precision Drive which prevents damage to the material and fastener in smaller jobs. POWERSTACK™ batteries deliver 50% more power with a 25% smaller footprint and they work with all DEWALT 18V XR tools. Bit Holder: 6.35mm (1/4in) No Load Speed: 0-1, 000/2, 800/3, 250/min. Impact Rate: 3, 800/bpm. Max. Torque: 205Nm. Weight: 0.9kg. It is supplied with: 1 x 18V POWERSTACK™ Li-ion Batteries 1.7Ah. 1 x 18V POWERSTACK™ Li-ion Batteries 5.0Ah. 1 x DCB1104 Charger. 1 x TSTAK™ Heavy-duty Kitbox.

DCK2052H1 Twin Kit 18V 1 x 1.7Ah & 1 x 5.0Ah Li-ion

The DEWALT DCK266M2T TSTAK™ Twin Kit, contains the following: 1 x 18V DCD796 XR Brushless Combi Drill which has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless. No Load Speed: 0-550/0-2, 000/min. Impact Rate: 0-9, 350/34, 000/bpm. Torque: 27/70Nm, 15 Settings. Capacity: Masonry/Steel 13mm, Wood 40mm. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in) No Load Speed: 0-1, 000/0-2, 800/0-3, 250/min. Impact Rate: 0-1, 800/0-2, 900/0-3, 800/bpm. Max. Torque: 26/80/205Nm. Weight: 1.56kg. Also supplied with: 1 x 10.8-18V DCB115 Multi-Voltage XR Charger, 2 x 18V 4.0Ah Li-ion Batteries and 1 x TSTAK™ Case.

DCK266M2T TSTAK Twin Kit 2 x 4.0Ah Li-ion

The DEWALT DCK2052H2 POWERSTACK™ Twin Kit, contains the following: 1 x 18V DCD999 XR XRP Combi Drill with FlexVolt ADVANTAGE technology. This unique electronic module features pack identification technology. This enables the tool to recognise when an XR FLEXVOLT battery is attached and can unlock even more power. A foot LED with delay feature, provides improved visibility and flashlight functionality. Chuck Capacity: 1.5-13mm. No Load Speed: 0-500/1, 500/2, 250/min. Impact Rate: 38, 250/bpm. Max. Torque: 67Nm. Max. Drilling Capacity: Metal 15mm, Wood 55mm, Masonry 13mm. Weight: 1.6kg (without battery) 1 x 18V DCF850 XR Brushless Impact Driver comes with a 3 mode switch for enhanced control including Precision Drive which prevents damage to the material and fastener in smaller jobs. POWERSTACK™ batteries deliver 50% more power with a 25% smaller footprint and work with all DEWALT 18V XR tools. Bit Holder: 6.35mm (1/4in) No Load Speed: 0-1, 000/2, 800/3, 250/min. Impact Rate: 3, 800/bpm. Max. Torque: 205Nm. Weight: 0.9kg. Also supplied with: 1 x DCB1104 Charger, 2 x 18V POWERSTACK™ Li-ion Batteries 5.0Ah &1 x TSTAK™ Heavy-duty Kitbox.

DCK2052H2 Powerstack Twin Kit 2 x 5.0Ah Li-ion

DCD706
• 12V tools and batteries are 100% compatible with your existing 10.8V products
• Compact Length 168mm to allow access to tight spaces
• Bright LED light on tool foot for high visibility in low light situations
• State of charge battery pack allows users to quickly check battery level
• Efficient brushless motor gives 15% more runtime than previous generation
• Only 1kg (tool only) for ultimate portability and ease of use
• 15 position adjustable torque control for consistent screw driving into a variety of materials
• 25,500bpm hammer mechanism for efficient masonry drilling
• 10mm keyless chuck with automatic spindle lock for quick and easy bit change
• Includes belt hook

DCF801
• Compact Length, allowing you to get into even smaller spaces
• 3 electronic speeds allow for greater control when working on precise applications
• 'Drop and Load' bit holder for one-handed operation
• Efficient brushless motor delivers high performance, extends tool life and allows for a much shorter design
• Only 0.9kg (tool only) for ultimate portability
• Includes belt hook

DCK2111L2T 12V XR Brushless Sub-compact Twin Pack DCD706 & DCF801 Includes 2 x 3AH Batteries, Multi-voltage Charger and TSTAK Kitbox

DCD996 Combi Hammer

    Automatic high speed hammer drill driver at 38,250 BPM increasing users masonry drilling speed of application
    3 Position LED torch, High/Medium/Low settings with High output 20min LED delay lighting up your work place
    Tough 3 speed all metal transmission for increased run-time and longer tool life
    Electronic Clutch with 11 position adjustable torque control for optimised precision when screw driving
    13mm ratcheting keyless chuck with automatic spindle lock for fast bit changes
    Efficient intelligent trigger allowing total control over all applications
    Improved grip design providing greater application control and maximum comfort
    Steel belt hook and magnetic bit holder ensure strong storage solutions

DCF887 Impact Driver

    Greater torque and control, with an improved ergonomic build and LED light
    High power Brushless motor outputting up to 205Nm of torque ensures heavy applications are completed quickly
    Application control is achieved through 3 motor speeds and torque settings including PrecisionDrive
    PrecisionDrive mode offers additional control in screwdriving applications to avoid material and fastener damage
    Super lightweight and compact the tool is very comfortable to use and fits in small spaces
    3x LED "Halo" light ring offers excellent work-piece lighting
    Compatible with all DeWalt 18V XR battery packs
    1/4" (6.35mm) 'drop in' bit holder allows for quick, one handed fitment

DCK276P2-GB 18V Brushless Twinpack 2X5.0AH

Six piece cordless tool kit comprising an angle grinder, compact reciprocating saw, circular saw, impact driver, combi drill and LED area light. 

To keep the tools running throughout the day the kit includes three 5.0ah batteries and an XR Multivoltage battery charger, and two Toughsystem carry cases are provided to store and transport everything.

Features and Benefits
• Angle grinder for cutting & grinding various construction materials
• Compact reciprocating saw for cutting wood, metal and other common materials
• Circular saw for straight cuts in wood and wood based materials
• Impact Driver for high torque fastening and unfastening applications
• Combi Drill for screwdriving and drilling into wood, metal and masonry
• Handheld or freestanding LED worklight for illuminating dark workspaces
• Three 5.0ah batteries and XR Multivoltage Battery Charger
• Two Toughsystem Carry Cases for transport and storage

Contents
• DCG405 18v XR 125mm Small Angle Grinder
• DCS367 18v XR Compact Reciprocating Saw
• DCS570 18v XR 184mm Circular Saw
• DCF887 18v XR 3 Speed Impact Driver
• DCD796 18v XR Compact Hammer Drill Driver
• DCL050 18v XR Handheld LED Area Light
• Toughsystem DS300 Carry Cases (x2)
• DCB184 18v XR 5.0Ah Batteries (x3)
• DCB115 XR MultiVoltage Charger

Specifications

 DCG405 18V XR 125mm Small Angle Grinder

• No Load Speed: 9000 rpm.
• Max. Disc Diameter: 125 mm.
• Spindle Thread: M14.
• Weight: 2.5kg.

DCS367 18V XR Compact Reciprocating Saw

• No Load Speed: 0-2,900/Min. 
• Stroke Length: 28.6mm.
• Capacity: Wood: 300mm, Steel Sections & Pipes: 100mm, PVC: 160mm.
•Length: 363mm. 
• Height: 203mm.
• Weight: 2.3kg.

DCS570 18V XR 184mm Circular Saw 

• No Load Speed 5500 rpm.
• Blade Diameter 184 mm.
• Blade Bore 16 mm.
• Bevel Capacity 57°.
• Max. Depth of Cut at 90º 64 mm
• Weight 3.6 kg.
• Length 355 mm.
• Height 245 mm.

DCF887 18V XR 3-Speed Impact Driver

• Max Torque 205 Nm.
• Power Output 400 Watt
• No Load Speed 0-1000, 0-2800, 0-3250 rpm
• Impacts per Minute 0 - 3800 ipm.
• Bit Holder 6.35mm (1/4in)
• Weight 0.94 kg.
• Length 134 mm.
• Height 195 mm.

DCD796 18V XR Compact Hammer Drill Driver

• Max Torque (Hard) 70 Nm.
• Max Torque (Soft) 27 Nm.
• Power Output 460 Watt.
• No Load Speed 0-550/2000 rpm.
• Beats per Minute 0-9350/34000 bpm.
• Chuck Capacity 1.5-13 mm.
• Max. Drilling Capacity [Wood] 40 mm.
• Max. Drilling Capacity [Metal] 13 mm.
• Max. Drilling Capacity [Masonry] 13 mm.
• Weight 1.8 kg
• Length 190 mm
• Height  203 mm
• Width    67 mm

DCL050 18V XR Handheld LED Area Light

• Battery chemistry XR Li-Ion
• Voltage 18 V.
• Bulb Type LED.
• Height 345 mm.
• Length 95 mm.
• Weight (incl. battery) 0.8 g.

DCK623P3-GB Combi Drill and Impact Driver XR 18V Brushless Kit Including 2X 5.0AH Batteries, Charger & TSTAK Kit Box

DCK229P2T-GB 18V XR Brushless Combi Drill and SDS+ Drill with 2x 5.0Ah Li-Ion Batteries

The DeWalt 18V XR Brushless Twin pack includes a DCD996 18V cordless combi drill  and  DCH273 SDS plus drill

DCK229P2T-GB 18V XR Premium HDD & SDS TSTAK

This combi kit comes complete with an DCH333 SDS plus rotary hammer and DCD996 combi drill, as well as 2x 9.0Ah batteries, a DCB118 charger and a Toughsystem case.

DCH333 SDS+ Rotary Hammer Features and Benefits:
•Rotation stop mode allows for light chiselling in plaster, tiles and render and the impact stop mode allows for rotary only drilling in wood and metal
•Brushless motor with high capacity XR FLEXVOLT 9.0Ah 18V/54V Lithium-ion battery platform for excellent runtime and low maintenance
•Improved visibility thanks to bright white LED with delay feature
•Compact, lightweight and ergonomic design improves versatility whilst enhancing wearer comfort

DCD996 Combi Drill Features and Benefits:
•All metal nitro-carburized chuck prolongs life as it is stronger and rust resistant
•Carbide inserts improve bit gripping strength and 3 speed gearbox allows for a greater range of applications
•Bright LED gives a range from 2.6 to a massive 60 lumens

DCH333 Specification:
•No Load Speed: 0 - 1000rpm
•Max. Drilling Capacity Concrete: 30mm
•Hand/Arm Vibration - drilling into Concrete: 7.5m/s2
•Blows Per Minute: 0 - 4480bpm
•Impact Energy: 3.5J

DCD996 Specification:
•Max Torque (Hard/Soft): 95/66Nm
•Power Output: 830W
•No Load Speed: 0-500/1500/2250rpm
•Beats per Minute: 0-8600/25500/38250bpm
•Chuck Capacity: 1.5-13mm
•Max. Drilling Capacity (Wood/Metal/Masonry): 55/15/13mm
•Length: 213mm, Height: 208mm, Width: 70mm
•Sound Pressure: 97dB(A)
•Sound Pressure Uncertainty: 3dB(A)
•Sound Power: 108dB(A)
•Sound Power Uncertainty: 3dB(A)
•Hand/Arm Vibration - Drilling into metal: 2.5m/s
•Uncertainty K 1/K 2/K 3 (Vibration): 1.5/3.9/1.5m/s
•Hand/Arm Vibration - Hammer drilling into concrete: 15m/s
•Hand/Arm Vibration - Screw driving without impact: 2.5m/s
•Weight (without battery): 1.6kg

DCK2033X2-GB Flexvolt Twin Pack, XR 54V SDS, Combi Kit

The DEWALT DCK694P3 Brushless 3 Speed 6 Piece Kit, contains the following 1 x 18V DCD995 Brushless XRP Combi Drill with a tough three speed all metal transmission for increased runtime and longer tool life. Part of the intelligent XR Lithium Ion Series designed for efficiency and faster applications. Chuck 1.5-13mm. No Load Speed 0-450/0-1,300/0-2,000/min. Impact Rate 0-7,650/0-22,100/0-34,000/min. Max Torque 80Nm. Drilling Capacity Wood 50mm, Steel 13mm, Masonry 16mm. 1 x 18V DCF886 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment. Bit holder 6.35mm (1/4in) hex. No Load Speed 0-2,800/min. Impacts Per Minute 0-3,200/bpm. Max Torque 165Nm. Capacity Bolt M12. 1 x 18V DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. No Load Speed 3,700/min. Max Cutting Depth @90 55mm, @45 55mm. Blade 165 x 20mm bore. Weight 3.8kg. 1 x 18V DCG412 Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. No Load Speed 7,000/min. Disc Diameter 125mm, M14 Spindle. Weight 3.0kg. 1 x 18V DCS331 Jigsaw has a keyless blade change and intelligent variable speed trigger. Accepts T-shank blades. Strokes at No Load 0-3,000/min. Levels of Pendulum Stroke 4. Stroke Length 26mm. Capacity Wood 135mm, Metal 10mm. 1 x 18V DCL040 LED Pivot Light has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED Bulb produces 110 Lumen output (10,000Hr Life) with a 2 zone light pattern. The flashlight head pivots more than 90º vertically with ratchet lock. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Supplied with 3 x 18V 5.0Ah Li-ion Batteries and 2 x DS300 TOUGHSYSTEM Toolboxes

Browse our original DeWalt products in Cordless Twin Packs & Kits

We suggest upgrading to Chrome